Multitech MultiModem MT5600ZDX User manual

Owners Manual

Model MT5600ZDX

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a residential installation. This equipment generates,

uses and can radiate radio frequency energy, and if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that of which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the users authority to operate this

equipment.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person

to use a computer or other electronic device to send any message via a telephone

fax machine unless such message clearly contains in a margin at the top or bottom

of each page or the first page of the transmission, the date and time it is sent and

an identification of the business or other entity, or other individual sending the

message and the telephone number of the sending machine or such business,

other entity, or individual. See the cover page of your fax software manual for

setup details. This device complies with Part 15 of the FCC rules. Operation is

subject to the following conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Owners Manual

82068601 Revision B

Model MT5600ZDX

This publication may not be reproduced, in whole or in part, without prior expressed written

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents

hereof and specifically disclaims any implied warranties of merchantability or fitness for any

particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this

publication and to make changes from time to time in the content hereof without obligation of

Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.

Revision Date Description

A 7/14/97 Manual released at Revision A.

B 9/15/98 Added #V, Class 2 fax, and V.90 information.

MultiModemZDX, Multi-Tech, and the Multi-Tech logo are trademarks of Multi-Tech Systems,

Inc. K56flex is a registered trademark of Rockwell and Lucent Technologies Corp.

sion. All brand and product names mentioned in this publication are trademarks or

registered trademarks of their respective companies.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(612) 785-3500 or (800) 328-9717

U. S. FAX 612-785-9874

Fax-Back Service 612-717-5888

Technical Support (800) 972-2439

BBS (612) 785-3702 or (800) 392-2432

Internet Address: http://www.multitech.com

Technical Writer: [email protected]

Model MT5600ZDX

Contents

Chapter 1

Introduction ................................................... 6

Product Description ....................................... 6

What Is in Your Modem Package? ................ 8

Chapter 2

Installation ..................................................... 8

Computer ........................................................ 9

Serial Cable ................................................... 9

Telephone Line ............................................... 9

Safety Warnings ............................................. 9

Communications Software ..........................10

Assemble the Modem ...................................10

Installation Process ..................................... 11

LED Indicators ............................................13

Is Your MultiModemZDX Ready for Use? ..15

Operating Your MultiModemZDX ..............15

Simple Operations .......................................16

Software Configuration ............................... 17

Hardware/Software Confirmation ..............18

Troubleshooting ..........................................18

Chapter 3

AT Commands .............................................. 25

S-Registers ...................................................44

Result Codes ................................................ 56

Owners Manual

Chapter 4

Local Analog Loopback Test/V.54 Loop 3 .60

Digital Loopback Test/V.54 Loop 2 ............ 61

Chapter 5

Introduction .................................................64

Limited Warranty .........................................64

Tech Support ................................................64

Recording Modem Information ..................65

Service ..........................................................65

About the Multi-Tech BBS ..........................66

Logging on to the Multi-Tech BBS .............66

Downloading a File .....................................66

Reading a Message ......................................68

Leaving a Message ......................................68

Bulletins .......................................................68

Using Flash to Upgrade Firmware .............68

About CompuServe/Internet ........................70

About the Multi-Tech Fax-Back Service ....70

Appendix A - Technical Specifications ......................... 71

Appendix B - Regulatory Information .......................... 76

Appendix C - V.90 Information..................................... 82

Model MT5600ZDX

Introduction

Welcome to the world of data communications. You have acquired one

of the finest intelligent data/fax modems available today, the MultiMo-

demZDX, from Multi-Tech Systems. This Owners Manual will help you

install, configure, test and use your MultiModemZDX.

Product Description

Your MultiModemZDX incorporates new modem technologies called V.90

and K56flexTM, that enable Internet connections at data rates up to 56K bps

over standard telephone lines. This 56K technology is able to propel data

downstream from the Internet to your computer at speeds of up to 56K bps

because data is digitally encoded instead of modulated. Upstream

transmission, mostly keystroke and mouse commands from your computer

to the central site, continue to flow at the conventional data rate of 33.6K

bps.

Your MultiModemZDX offers interactive automatic dialing, as well as

command mode option configuration. You may store four command line/

telephone numbers, of up to 40 characters each, in the modems

nonvolatile memory. The modem pulse or tone dials, and recognizes dial

tones and busy signals for reliable call-progress detection. Themodem

can detect AT&T calling card tones. It is FCC-Registered for connection to

telephone networks without any Data Access Arrangements (DAAs).

Though this modem is capable of 56K bps download performance line impairments, public

telephone infrastructure and other external technological factors currently prevent

maximum 56K bps connections.

The MultiModemZDX is a desktop fax/modem for compatible IBM Personal

Computers; and provides dial-up asynchronous communication capability

with other personal computers, terminals, on-line computer services or

other types of computer systems.

Connection to the phone line and/or an attached telephone device is made

by RJ11 modular type connectors; the PC connection is made via an

RS232C/V.24 serial cable receptacle; and low voltage DC power is supplied

to the MultiModemZDX through a modular power supply connection

included with the modem. All these connections are located on the rear

of the MultiModemZDX. Hardware installation procedures are described in

Chapter 2.

Owners Manual

General features include:

4Compliance with major ITU-T, TIA, and EIA international standards to

ensure compatibility with other modems.

4Distinguishes data, and fax calls.

4Caller ID to identify your callers phone number (available on U.S.

products).

Data

4Supports V.90 and K56flexTM for data transmission speeds up to 56Kbps,

while maintaining compatibility with lower-speed modems.

Note the V.90 and K56flex standards asymmetrically transfers data--

client downloads at speeds up to 56K bps, client uploads at speeds up

to 33.6K bps.

4Supports the enhanced ITU-T V.34 standard, with data transmission

speeds to 33.6K bps, while also maintaining compatibility with lower-

speed modems.

4Supports V.90 and K56flex speeds plus 33.6K, 31.2K, 28.8K, 26.4K,

24K, 21.6K, 19.2K, 16.8K, 14.4K, 12K, 9.6K, 7.2K, 4.8K, 2.4K, 1.2K,

and 0-300 bps.

4Automatic fallback to slower speeds in noisy line conditions, and fall-

forward to faster speeds as conditions improve (line quality monitoring).

4ITU V.42 LAP-M and MNP Class 3 and 4 error correction.

4ITU V.42bis (4-to-1) and MNP 5 (2-to-1) data compression.

4MNP10 and MNP10ECTM Enhanced Cellular Performance (error correc-

tion).

4H.324 compliant (videophone ready).

4Automatic disabling of compression when transferring already-com-

pressed files.

4Autodial, redial, pulse (rotary) and touch-tone dial.

4Dial tone and busy signal detection for reliable call-progress detection.

4Distinctive ring support to route voice, data, or fax calls on a single

phone line.

4Plug and Play (PnP) serial support.

4FlashROM upgradable.

4Compatibility with the standard AT command set used by most commu-

nication programs.

Model MT5600ZDX

Fax

4Supports V.17, Class 1and Class 2 Group 3 fax communication

standards, allowing it to communicate with other fax modems as well

as with fax machines.

4Sends and receives faxes from your computer at 14,400 bps, 9600 bps,

7200 bps, 4800 bps, 2400 bps, or 300 bps.

What Is in Your Modem Package?

Your MultiModemZDX has several components. Make sure you have

them all before installing your modem. Your package should include:

MultiModemZDX data/fax modem

DC power supply

One set of four plastic feet

Two sets of Velcro fasteners

Telephone cord

MultiModemZDX Owners Manual

Data Communications Software

One Set-Up diskette

Brochure with warranty registration card

If any of these items are missing, please contact Multi-Tech Systems or your

dealer/distributor.

Installation

In addition to the contents of the MultiModemZDX package, you will

need the following equipment.

Computer

The MultiModemZDX can be connected to any computer with an RS-232

serial port.

Owners Manual

Serial Cable

You must provide a serial cable to connect the MultiModemZDX to your

computer. Serial cables are available at computer stores and many office

supply stores. The cable must have a DB-25P connector at the modem end.

For IBM and compatible computers, the other end may have a DB-25P

connector or a DB-9S connector, depending on your particular computer

and whether you are using the COM1 or the COM2 serial port. The FCC

requires cables to be shielded.

DB-25 DB-9

Telephone Line

You must have a telephone line with a conveniently located connector

(jack) to accept the cable that comes with the MultiModemZDX. If you

do not have a telephone jack near your computer, you should install an

extension before proceeding.

In North America, telephone extension kits and accessories are available

at electronics stores and wherever telephones are sold. You may also hire

an independent contractor or your local telephone company to do the

work. If you want to add a line for your MultiModemZDX fax modem,

you must contact your telephone company.

Model MT5600ZDX

Safety Warnings

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

3. Never touch uninsulated telephone wires or terminals unless the telephone

line has been disconnected at the network interface.

4. Use caution when installing or modifying telephone lines.

5. Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electrical shock from lightning.

6. Do not use the telephone to report a gas leak in the vicinity of the leak.

Communications Software

To operate the ZDX, you must have data and fax communications software.

Data comm software simplifies control of the modem by guiding you through

the process of selecting your serial port, your port speed, and other variables,

and then storing your settings, including frequently called phone numbers,

so they can be recalled with the stroke of a key or the click of a mouse. The

software must be set up, or configured, before you can use it. You must have

Microsoft Windows 3.1 or later to run most prevalent software packages. If

you require software for DOS or for the Macintosh operating systems, please

contact Multi-Tech Sales.

Assemble the Modem

The only assembly required is to mount the feet on the bottom of the modem.

Simply peel the four self-adhesive plastic feet off the backing strip and press

them into the recesses on the bottom of the modem. Alternately, or

additionally, you can use the self-adhesive Velcro patches to mount the

modem to a vertical surface or to keep it from being dislodged on a horizontal

surface.

If you use the Velcro patches, we recommend that you mount them where

they will not obscure the labels on the bottom of the modem. The ZDX has

no special placement restrictions, but we recommend that you place it where

you can see the indicators on the front panel.

Other manuals for MultiModem MT5600ZDX

Other Multitech Modem manuals

Multitech

Multitech IWAY MT128ISA-UV User manual

Multitech

Multitech MultiModem ZPX MT5634ZPX-PCI Series User manual

Multitech

Multitech MultiModem MT2834ZPW User manual

Multitech

Multitech MultiModem ZBA USB MT5634ZBA-USB User manual

Multitech

Multitech MultiModem MT9234ZPX-UPCI User manual

Multitech

Multitech MultiModem IND MT5634IND User manual

Multitech

Multitech MultiModem MT9234ZPX-PCIE User manual

Multitech

Multitech MultiModem ZBA MT9234ZBA User manual

Multitech

Multitech MessageSaver MT5634MSV User manual

Multitech

Multitech MTCMR-H User manual

Multitech

Multitech MultiModem MTCBA?H3?U1 User manual

Multitech

Multitech MTSMC-H5 Application guide

Multitech

Multitech MultiModem Cell MTCBA-E1 User manual

Multitech

Multitech MultiModem ZPX User manual

Multitech

Multitech MT2834BA User manual

Multitech

Multitech MultiModem MT2834BLR User manual

Multitech

Multitech SocketModem Cell MTSMC-LVW3 Application guide

Multitech

Multitech MTSMC-E User manual

Multitech

Multitech MultiModem MTCBA-G-UF1 User manual

Multitech

Multitech Dragonfly MTQ-L4G1 User manual

Multitech

Multitech MultiModem II BA-Series User manual

Multitech

Multitech Multimodem RJ-45 User manual

Multitech

Multitech MTCBA-E-U User manual

Multitech

Multitech Multimodem MTCBA-G-F1 User manual

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual