Zhone 6310 User manual
6310-A2-ZN12-10 6310-A4 ReachDSL Modem 1
Hotwire®ReachDSL®v1 (MVL®) Modem,
Model 6310-A4, with Inline Phone Filter
Installation Instructions
Document Number 6310-A2-ZN12-10
December 2005
Contents
End User License Agreement (Zhone and Affiliates) ............................................................... 1
Hotwire 6310 ReachDSL v1 (MVL) Modem Overview .......................................................... 3
Getting Started ........................................................................................................................... 6
Installing the Hotwire 6310 ReachDSL v1 Modem .................................................................. 7
Power-On .................................................................................................................................. 10
Troubleshooting ......................................................................................................................... 11
HomeLink (for ReachDSL v1 Modems Only) .......................................................................... 12
Increasing the Number of End-User Systems ........................................................................... 12
Cables & Connectors ................................................................................................................. 13
Optional ReachDSL Modem Wall Placement ........................................................................... 15
Technical Specifications for Hotwire 6310 ReachDSL v1 Modem .......................................... 17
Important Safety Instructions .................................................................................................... 18
Government Requirements ........................................................................................................ 21
Trademarks ................................................................................................................................22
Patent Notification .................................................................................................................... 22
Contacting Global Service and Support .................................................................................... 23
Technical Support ...................................................................................................................... 23
Service Requirements ................................................................................................................ 23
End User License Agreement (Zhone
and Affiliates)
License. Zhone Technologies, Inc. and/or an affiliate ("Zhone") hereby grants you
("User")—either an individual or a single business entity—the non-exclusive right to install,
access, run, or inter. act with ("Use") one copy of the enclosed software (which may have been,
or may be, provided on media, as part of a hardware platform, through download, or otherwise)
and associated documentation ("Software") on the first computer system on which User installs
the Software ("System") solely for internal business purposes (including, without limitation,
providing products and services to User's customers) and subject to the restrictions below).
Do not install this Software unless you agree to these provisions.
Return the Software promptly for a refund if you do not agree.
26310-A4 ReachDSL Modem 6310-A2-ZN12-10
Zhone may, in its sole discretion, make available future updates or upgrades to the Software each
of which is also Software subject hereto. Title to and all patent rights, copyrights and other
intellectual property rights in the Software are retained by Zhone and its direct and indirect
suppliers and licensors ("Licensors").
Restrictions. The Software may not be (a) Used on or from any system other than the System; (b)
Used with more than any maximum number of subscribers stated in the documentation
accompanying the Software; (c) Used so as to circumvent any technological measure included
therein or provided by Zhone from time to time to control access to or limit use of the Software;
(d) sublicensed, rented, leased or lent to third parties; (e) imported or exported into any
jurisdiction except in compliance with all applicable laws of the United States and such
jurisdiction; (f) transferred to a third party unless (A) User transfers the original and all surviving
copies to a third party who has agreed in writing to be bound hereby and (B) such third party pays
to Zhone such reasonable additional fee as Zhone may impose from time to time with respect to
such transfer; or (g) made available to third parties as part of any time-sharing or service bureau
arrangement. User shall not have the right to use the Software or any portion thereof for a use
other than that contemplated by its documentation. User will not copy all or any part of the
Software or attempt, or encourage or permit any third party, to modify, adapt, make derivative
works from, reverse engineer, reverse compile, disassemble or decompile the Software or any
portion thereof except and only to the extent that such activity is expressly permitted by law
notwithstanding this limitation. Violation of any of the foregoing shall be deemed a material
breach hereof. User may make a reasonable number of copies solely for archival or disaster
recovery and subject to the restrictions imposed by copyright law, but may not modify or
otherwise copy the Software. User agrees to reproduce product identification, copyright and
other proprietary notices of Zhone and Licensors on all copies. User's rights are only as expressly
stated herein. Zhone may immediately terminate your rights if you violate the provisions hereof.
Limited Warranty. Zhone warrants that the media containing the Software is free from defects in
material and workmanship for ninety (90) days following your purchase of the Software. You
may provide written notice of such defect (addressed to Zhone Technologies, Inc., Attention:
Customer Service, 7001 Oakport Street @ Zhone Way, Oakland, CA 94621) no later than ten
(10) days following expiration of such period and, as your sole and exclusive remedy, Zhone will
provide replacement media. NEITHER ZHONE NOR ITS LICENSORS MAKE ANY OTHER
WARRANTY, EXPRESS, IMPLIED OR STATUTORY. ZHONE AND ITS LICENSORS
DISCLAIM ALL WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE,
MERCHANTABILITY AND NON-INFRINGEMENT. Some states or other jurisdictions do not
allow the exclusion of implied warranties on limitations on how long an implied warranty lasts,
so the above limitations may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from one state or jurisdiction to another.
Limit of Liability. In case of any claim hereunder or related to the Software, neither Zhone nor its
Licensors shall be liable for direct damages exceeding the price paid by User for the Software or
for special, incidental, consequential or indirect damages, even if advised in advance of the
potential thereof.
U.S. Government Users. The Software is a "commercial item" as defined at 48 C.F.R. 2.101,
consisting of "commercial computer software" and "commercial computer software
documentation" as such terms are used in 48 C.F.R. 12.212. Under 48 C.F.R. 12.212 and 48
C.F.R. 227.7202-1 to 227.7202-4, U.S. Government Users acquire the Software only with the
rights set forth therein.
6310-A2-ZN12-10 6310-A4 ReachDSL Modem 3
Third Party Licensors. This Zhone End User License Agreement may be accompanied by
differing or additional provisions applicable to portions of the Software provided by one or more
Licensors ("Licensor Provisions"). User acknowledges and agrees that its Use of such portions of
the Software is subject to the Licensor Provisions.
Hotwire 6310 ReachDSL v1 (MVL)
Modem Overview
The Hotwire®6310 ReachDSL®version 1 (formerly MVL®) Modem is a component in the
Hotwire ReachDSL System and interoperates with the Hotwire 8310 MVL, or Hotwire
8312/8314 ReachDSL Card in the DSLAM (Digital Subscriber Line Access Multiplexer)
system. This system provides high-speed Internet or corporate LAN access over traditional
twisted-pair copper telephone wiring.
The ReachDSL technology:
zUtilizes an inline phone filter on the ReachDSL modem’s PHONE jack.
zOperates over existing copper wire with existing telephone jacks.
zIncludes a second line pass-through from the ReachDSL modem’s LINE jack to PHONE
jack to accommodate an attached 2-line telephone.
zProvides rate adaptive data rates to dynamically adapt and allocate bandwidth to optimize
applications.
In addition, the ReachDSL v1 technology:
zTransforms a single copper pair into multiple virtual lines to support multiple services
simultaneously.
zSupports simultaneous multiple access of four ReachDSL v1 modems with up to
254 end-user systems sharing one common WAN interface.
zFeatures HomeLink, which provides peer-to-peer communications, including print and file
sharing applications (see HomeLink (for ReachDSL v1 Modems Only) on page 12).
46310-A4 ReachDSL Modem 6310-A2-ZN12-10
Hotwire ReachDSL System
Copper pairs run from the central office (CO) to the customer premises (CP) to create the local
loop. The local loop terminates on the customer premises at the demarcation point.
NOTES:
In this document:
— A telephone is used to represent any equipment that plugs into a phone jack and uses
the POTS line, such as a phone, modem, or fax machine.
— End-user system is used to represent any PC with an Ethernet connection and
ReachDSL-based service.
— RJ11 wall jack is used to represent either an RJ11 or an RJ14 wall jack. The RJ14 wall
jack is used for a phone with two lines.
— Service provider is used to represent any Internet Service Provider (ISP) or remote
LAN access provider.
01-17005
Customer Premises (CP)
DSL/POTS
Ethernet
Crossover
Cable
Ethernet
Cable
or
Central
Office
(CO)
Local Loop
Hub
DSL – Digital Subscriber Lines
POTS – Plain Old Telephone Service
End-user
Systems
(up to 32)
Network
Service
Provider
(NSP)
Demarcation
Point
ReachDSL
Modem
6310-A2-ZN12-10 6310-A4 ReachDSL Modem 5
Phone Filter
Depending on the type of phone handset and the quality of the home or business wiring, a phone
filter is recommended to minimize background noise during a phone conversation. An internal
phone filter is included with the Hotwire 6310 ReachDSL v1 Modem. If additional telephones
are used on the same phone line as the ReachDSL modem, install one phone filter on each
telephone.
There are two Hotwire phone filters:
zHotwire 6035 Universal Phone Filter is designed for use with a tabletop phone.
zHotwire 6040 Universal Wall Jack Phone Filter is designed for use with a wall phone.
Product-Related Documents
To install a phone filter, refer to the appropriate document:
zHotwire 6035 Universal Phone Filter Installation Instructions
zHotwire 6040 Universal Wall Jack Phone Filter Installation Instructions
Contact your sales or service representative to order additional product documentation.
Product documents are available on the World Wide Web at www.zhone.com.
PHONELINE
ETHERNET
POWER
PHONELINE
ETHERNET
POWER
01-17006
RJ11
Wall Jack
RJ11
Wall
Jack
ReachDSL Modem
Customer
Premises (CP)
FAX
ReachDSL
Modem
6035
Phone Filter
6040
Wall Jack
Phone
Filter
66310-A4 ReachDSL Modem 6310-A2-ZN12-10
Getting Started
Before beginning your modem’s installation, make sure that you have all the equipment that you
need.
Package Checklist
Verify that your package contains the following:
zHotwire 6310 ReachDSL v1 Modem
zDSL interface cable with RJ11 connectors
zPower cord with power transformer
Wiring and Cables You Need
The following wiring and standard connectors are used with this product:
zStandard RJ11 (or RJ14) wall jack for the ReachDSL modem cabling.
zStandard Ethernet 8-pin, non-keyed modular plug for a PC or workstation. An Ethernet
straight-through or crossover cable is used.
—RefertoInstalling the Hotwire 6310 ReachDSL v1 Modem on page 7 for Ethernet
installation details.
—RefertoCables & Connectors on page 13 for ReachDSL modem and Ethernet cable
pin assignments.
6310-A2-ZN12-10 6310-A4 ReachDSL Modem 7
Installing the Hotwire 6310 ReachDSL v1
Modem
Place the ReachDSL modem on a flat surface with clearance for the rear connectors.
Procedure
1If a telephone is connected at the RJ11
wall jack where the modem will be installed,
unplug the telephone line from the wall jack.
2Connect a telephone to the modem. (Optional –
go to Step 3 if you are not connecting a
telephone to the ReachDSL modem.)
Plug the existing telephone interface cable that
was unplugged in Step 1 into the jack labeled
PHONE.
3Use the supplied RJ11 6-pin interface cable for
the LINE connection. Insert one end of the cable
into the jack labeled LINE. Insert the other end of the cable into the RJ11 wall jack.
NOTE:
If you are installing a POTS splitter with another telephone, connect the telephone to
the jack labeled PHONE, then connect the jack labeled LINE to a wall jack. Do NOT
plug any cable into the POTS splitter jack labeled either MODEM or DSL. In
particular, make NO connections between a POTS splitter and the modem.
01-17015a
RJ11
Wall Jack
01-17015
RJ11
Wall Jack
PHONE LINE
ETHERNET
POWER
RJ11
6-pin
Interface Cable
PHONE LINE
86310-A4 ReachDSL Modem 6310-A2-ZN12-10
4Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the
jack labeled ETHERNET.
— Use a straight-through cable and connect the other end to an Ethernet hub.
(To connect to a hub’s Uplink connection, use an Ethernet crossover cable).
–or–
— Use an Ethernet crossover cable and connect the other end to a PC with an Ethernet
Network Interface Card (NIC) installed.
PHONE LINE
ETHERNET
POWER
01-17008
Ethernet
Line
Ethernet
Hub
87654321
Ethernet
Straight-Through
Cable
01-17009
Ethernet
Line
PC with Ethernet
Network Interface
Card
Ethernet
Crossover
Cable
PHONE LINE
ETHERNET
POWER
6310-A2-ZN12-10 6310-A4 ReachDSL Modem 9
5Insert the supplied power cord’s round end into the jack labeled POWER. Plug the
transformer into an AC outlet.
The ReachDSL modem hardware installation is now complete. When the power cord is installed,
the ReachDSL modem goes through a power-on self-test.
PHONE LINE
ETHERNET
POWER
01-17010
Power
Jack
Transformer
or
10 6310-A4 ReachDSL Modem 6310-A2-ZN12-10
Power-On
When power is applied, the ReachDSL modem performs self-diagnostics and the PWR LED is
on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on for one second.
Status LEDs
All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the
LEDs should appear as indicated in BOLD in the Condition column below.
Refer to Troubleshooting on page 11 for LED indications requiring action.
LED Condition Status
PWR ON ReachDSL modem has power.
ALM OFF
ON
No active alarms.
An alarm condition exists.
TST OFF
ON
No active tests.
The TST LED is on during the power-on self-test and during a
test initiated by the service provider.
LINE ON
OFF
The DSL link is active and ready to transmit and receive data.
The DSL link has not been established.
TX/RX ON
OFF
Data transmission is in progress on the DSL line.
The modem is not transmitting or receiving data.
ETHERNET ON
OFF
The Ethernet connection to the Ethernet hub or PC is active.
No Ethernet 10BaseT device is detected.
This manual suits for next models
1
Table of contents
Other Zhone Modem manuals
Zhone
Zhone 6228-I2-xxx User manual
Zhone
Zhone StormPort 1020 User manual
Zhone
Zhone Hotwire ReachDSL 6350-A4 User manual
Zhone
Zhone 6382-A1-xxx User manual
Zhone
Zhone 1612-A2-xxx User manual
Zhone
Zhone 6511 User manual
Zhone
Zhone 6652 6652-A1 User manual
Zhone
Zhone 6381-A4-200 User manual
Zhone
Zhone 6218-I2-xxx User manual
Zhone
Zhone zNID-GPON-2403 Manual
Zhone
Zhone 4821-A2 User manual
Zhone
Zhone 6212-I3-200 User manual
Zhone
Zhone 1611-A2-xxx User manual
Zhone
Zhone 6218-13 Series User manual
Zhone
Zhone Hotwire 6205 User manual
Zhone
Zhone 6411 User manual
Zhone
Zhone 6211-I3 Series User manual
Zhone
Zhone 3920Plus User manual
Zhone
Zhone 1511-A1 Manual
Zhone
Zhone 6411-A1-xxx User manual
