Multitech MTCBA-E User manual
MultiModemEDGE
Wireless Modem
MTCBA-E
Quick Start Guide
Copyright and Technical Support
2 Multi-Tech Systems, Inc. Quick Start Guide
Quick Start
MultiModemWireless EDGE Modem
MTCBA-E
82010743L, Revision D
Copyright © 2005-6 by Multi-Tech Systems, Inc.
This publication may not be reproduced, in whole or in part, without prior
expressed written permission from Multi-Tech Systems, Inc. All rights
reserved.
Multi-Tech Systems, Inc. makes no representations or warranty with respect to
the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this
publication and to make changes from time to time in the content hereof
without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes. Check Multi-Tech’s Web site for
current versions of our product documentation.
Record of Revisions
Revision Date Description
B 01/27/06 Add the fused DC power cable information.
C 06/13/06 Moved the AT Command section to the User
Guide. Changed the format to a booklet.
D 06/22/06 Changed location of Activation Notices. Added
note about current document on Web site.
Trademarks
Trademarks and registered trademarks of Multi-Tech Systems, Inc. include
MultiModem, the Multi-Tech logo, and Multi-Tech. All products or technologies
are the trademarks or registered trademarks of their respective holders.
Technical Support
Country By Email By Phone
India: support@multitechindia.com +91 (124) 2340780
+763-717-5863
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
(763) 785-3500 or (800) 328-9717
Fax 763-785-9874
Internet Address: http://www.multitech.com
MultiModem EDGE Wireless Modem
Multi-Tech Systems, Inc. Quick Start Guide 3
Introduction
The purpose of this guide is to show you how to set up your
MultiModem EDGE wireless modem. For information on operating
and configuring your modem see the User Guide, which is available
on the MultiModem CD and the Multi-Tech Web site.
See the Multi-Tech Web site for the lastest version of user
documentation.
General Safety
The modem is designed for and intended to be used in fixed and
mobile applications. “Fixed” means that the device is physically
secured at one location and is not able to be easily moved to
another location. In a “Mobile” application, the device may be moved
regularly from one location to another.
Caution: Maintain a separation distance of at least 20 cm (8 inches)
between the transmitter’s antenna and the body of the user or
nearby persons. The modem is not designed for, nor intended to be,
used in applications within 20 cm (8 inches) of the body of the user.
RF Interference Issues
Avoid possible radio frequency (RF) interference by carefully
following the safety guidelines below.
•Switch OFF the MultiModem when in an aircraft. The use of
cellular telephones in aircraft is illegal. It may endanger the
operation of the aircraft and/or disrupt the cellular network.
Failure to observe this instruction may lead to suspension or
denial of cellular services to the offender, legal action, or both.
•Switch OFF the MultiModem in the vicinity of gasoline or diesel-
fuel pumps or before filling a vehicle with fuel.
•Switch OFF the MultiModem in hospitals and any other place
where medical equipment may be in use.
•Respect restrictions on the use of radio equipment in fuel
depots, chemical plants, or in areas of blasting operations.
MultiModem EDGE Wireless Modem
4 Multi-Tech Systems, Inc. Quick Start Guide
•There may be a hazard associated with the operation of your
MultiModem in the vicinity of inadequately protected personal
medical devices such as hearing aids and pacemakers.
Consult the manufacturers of the medical device to determine if
it is adequately protected.
•Operation of the MultiModem in the vicinity of other electronic
equipment may cause interference if the equipment is
inadequately protected. Observe any warning signs and
manufacturers’ recommendations.
Vehicle Safety
•Do not use your MultiModem while driving.
•Respect national regulations on the use of cellular telephones
in vehicles. Road safety always comes first.
•If incorrectly installed in a vehicle, the operation of MultiModem
telephone could interfere with the correct functioning of vehicle
electronics. To avoid such problems, be sure that the
installation has been performed by qualified personnel.
Verification of the protection of vehicle electronics should be
part of the installation.
•The use of an alert device to operate a vehicle’s lights or horn
on public roads is not permitted.
Package Contents
Single Package (one unit) Bundled Package (multiple units)
1 modem
1 mounting bracket
1 fused DC power cable
1 Quick Start Guide
1 MultiModem CD
Note: You must supply:
Screws for the bracket
An antenna
Each individual package in the
bundle includes the following:
1 modem
1 mounting bracket
1 RS232 cable (15-to-9 pin)
1 antenna
1 power supply
4 rubber feet
1Quick Start Guide
1 MultiModem CD
Note: You must supply screws for
the bracket.
Note: Your wireless provider will supply the SIM card.
MultiModem EDGE Wireless Modem
Multi-Tech Systems, Inc. Quick Start Guide 5
Activate Your Wireless Account
Multi-Tech – A Certified National Activation Agent
Multi-Tech Systems, Inc. is a certified national activation agent for
Cingular and Sprint wireless. For more information about
available data plans and to purchase and activate a wireless data
account, contact Multi-Tech at 888-288-5470.
Pre-Configured Multi-Tech Products
Each Multi-Tech wireless product has been pre-configured to
operate on a wireless network.
Activate Your Wireless Account
Please see the wireless account Activation Notices located on the
MultiModem CD. Choose the one for your wireless network
provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number.
The phone number may simply be given to you by your wireless
service provider or it may be on the SIM card or both. Wireless
provider implementations may vary.
Inserting SIM Card into Holder
The wireless modem requires a SIM card (Subscriber Identity
Module) to operate on a GSM/GPRS or EDGE network. To install
the SIM card:
1. Using your fingernail or a small screwdriver, pry off the SIM
cover.
2. Insert the SIM card into the SIM card slot. The following graphic
illustrates the correct SIM card orientation.
Wireless Service Provider
will give you a SIM card.
Insert SIM card.
Replace cover.
3. Verify that the SIM card fits properly. Then replace the cover.
MultiModem EDGE Wireless Modem
6 Multi-Tech Systems, Inc. Quick Start Guide
Hook up the Antenna, Serial Cable, and Power
•Antenna. Connect a suitable antenna to the SMA connector
(see the User Guide for antenna/RF specifications).
•Serial Cable. Connect one end of the serial cable to the
modem and the other end to a PC.
•Power. Plug the power supply into the wireless MultiModem.
For standard transformer power supply:
∗Connect the AC cord and its transform block.
∗Connect the AC cord plug into the main power outlet.
Note: Units shipped with the universal AC power supply are
not suited for installation in hazardous locations.
For optional direct-DC powering:
∗Connect the fused DC power cable into the power source
on a vehicle or machine in which you are mounting the
MultiModem. Be sure the GNS connection is correct.
∗Connect the red wire to the + positive and the black wire
to the - negative.
MultiModem EDGE Wireless Modem
Multi-Tech Systems, Inc. Quick Start Guide 7
Note
For automotive applications, you can use permanent “+” or
key-switched “+” according to the type of application.
Connect the power supply to its source (for example, in a
mobile situation, to the vehicle’s DC fuse/terminal block).
Warning
Do not connect your wireless modem directly to a
vehicle’s battery for your power source. Doing so
may cause power spikes. If you wish to use the
battery as a power source, add a filtering device to
the DC input.
Optional – Attach the Modem to Flat Surface
The MultiModem is mounted against a flat surface with the mounting
bracket and two mounting screws. Drill the mounting holes at the
desired mounting location. The mounting holes must be separated
by 125mm (4 -15/16 inches) center-to-center. Slide the mounting
brackets into slot on the back side of the MultiModem chassis.
Attach the MultiModem to the surface with two mounting screws.
MultiModem EDGE Wireless Modem
Modem Driver Installation
Compatibility: The wireless modem is compatible with Windows
2000/2003+, Windows XP, and Linux.
Windows: To load the MultiModem wireless modem’s Windows
driver onto your PC, select the Control Panel’s Phone and Modem
Options option. During this installation, you will be required to
browse the MultiModem CD to load the modem’s INF file. This file is
located at the root directory on the MultiModem CD. See the User
Guide for information that will detail each step for loading the driver.
Linux: Linux does not require a driver for serial modems.
AT Commands
AT commands can be used to operate, configure, and query your
modem. An AT Command Reference Guide to the EDGE
commands is included on the MultiModem CD and on the Multi-Tech
Web site.
For examples of how to use some common operating, configuring,
and querying commands, see the User Guide.
Internet Access
See the User Guide for Internet access directions.
Using Mobile PhoneTools
Mobile PhoneTools is a communication software program included
on your MultiModem CD. You can install this program onto your PC
and use it for making Internet connections, voice calls, SMS
messaging, and email. This program allows you to use your wireless
modem hooked up to your PC as if it were a cell phone.
82010743L
Other manuals for MTCBA-E
3
This manual suits for next models
1
Table of contents
Other Multitech Modem manuals
Multitech
Multitech MultiModem MT9234ZPX-UPCI User manual
Multitech
Multitech MultMobile MT9234MU User manual
Multitech
Multitech MTC-LAT1 User manual
Multitech
Multitech MultiModem ZPX User manual
Multitech
Multitech MultiModem MT5634ZPX-PCI-U-NV User manual
Multitech
Multitech MultiModem MT4X56USB User manual
Multitech
Multitech MultiModem MT5600ZDX User manual
Multitech
Multitech MultiMobile MT56128ZLX-NT User manual
Multitech
Multitech MT56DSU-S User manual
Multitech
Multitech MultiModem MT5656ZDX-Series User manual
Multitech
Multitech MultiModem MT5634ZPX-PCI-U-NV User manual
Multitech
Multitech MMH2834 Technical manual
Multitech
Multitech MultiModem II MT5600BA-V.92 Installation manual
Multitech
Multitech MultiModem MT5600ZDX User manual
Multitech
Multitech MultiModem ISIHI-2S User manual
Multitech
Multitech MULTI MODEM II MT5600BL User manual
Multitech
Multitech MultiConnect microCell MTCM2 User manual
Multitech
Multitech MT9234ZBA-USB User manual
Multitech
Multitech MTE-LAT6-B07 User manual
Multitech
Multitech MultiModem MTCBA-G-UF1 User manual
