Milwaukee MC510 User manual

SPECIFICATIONS: MC510

RANGE ±1000 mV

RESOLUTION 1 mV

ACCURACY (@25°C) ±5 mV

SETPOINT 0 to 600 mV

ALARM active when the measure is

lower/higher than setpoint

depending on user selection

OUTPUT POWER SOCKET active when the measure is

higher/lower than selected setpoint

(5A max) depending on user selection

ORP ELECTRODE MA921B/2 (included)

ENVIRONMENT 0 to 50°C, 95% RH max.

POWER SUPPLY 12 VDC (included)

POWER DRIVERS 2A, 60Hz or 230VAC, 1A, 50Hz

DIMENSIONS 148.5 x 82.5 x 32 mm

WEIGHT 180 g (meter only)

OPTIONAL ACCESSORIES:

MA921B/2 ORP Electrode with BNC connector and 2m cable

M10000B Electrode rinse solution, 20 mL sachet (25 pcs)

MA9015 Electrode storage solution, 220 mL bottle

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for a period of two

years from the date of purchase. The electrode is warranted for a period of 6 months.

If during this period, the repair or replacement of parts is required, where the damage is not due to

negligence or erroneous operation by the user, please return the parts to either dealer or our office

and the repair will be effected free of charge

Note: We reserve the right to modify the design, construction and appearance of our products

without advance notice.

USER MANUAL

PORTABLE

ORP METER

MODEL: MC510

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

OPERATION:

•Connect the supplied 12

VDC power adapter to the

meter and to the mains line.

•Connect the ORP electrode

to the BNC socket on the

bottom of the meter.

•Always remove the elec-

trode protective cap before

taking any measurement. If

the electrode has been left

dry, soak the tip (bottom 2.5

cm) in rinse solution

(M10000B) for a few minutes to reactivate it.

•Turn the instrument on by pressing the ON/OFF key.

•Allow the reading to stabilize and the meter will start continuous

monitoring.

•The meter is factory calibrated.

•A blinking alarm will indicate when the measured ORP value is lower or

higher than the setpoint, depending on user selection.

NOTE:

•The power contact is not protected by fuse inside the meter. It is

recommended to protect it outside, against failure.

•WARNING: when the alarm led is blinking, the mains voltage is

present in the output power socket.

SETPOINT:

•The setpoint can be selected by

adjusting the central front knob to the

desired value.

•The selectable range for MC510 is

from 0 to 600 mV.

•The nature of the setpoint can be selected by setting the switch to the

desired position (ABOVE or BELOW).

INSTALLATION PROCEDURE:

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Other Milwaukee Measuring Instrument manuals

Milwaukee

Milwaukee Smart Monitoring System SMS110 User manual

Milwaukee

Milwaukee PH55 User manual

Milwaukee

Milwaukee 48-22-9802 User manual

Milwaukee

Milwaukee MW605 MAX User manual

Milwaukee

Milwaukee MA871 User manual

Milwaukee

Milwaukee MC730 User manual

Milwaukee

Milwaukee MI 411 User manual

Milwaukee

Milwaukee MW500 User manual

Milwaukee

Milwaukee MW102 User manual

Milwaukee

Milwaukee C12 CMH User manual

Milwaukee

Milwaukee 2235-20 User manual

Milwaukee

Milwaukee L4 CLL User manual

Milwaukee

Milwaukee M12 3632-20 User manual

Milwaukee

Milwaukee MW802 User manual

Milwaukee

Milwaukee MI 404 User manual

Milwaukee

Milwaukee MC125 User manual

Milwaukee

Milwaukee Heavy Duty 2270-20 User manual

Milwaukee

Milwaukee CD600 User manual

Milwaukee

Milwaukee MW14 User manual

Milwaukee

Milwaukee 2217-40 User manual

Milwaukee

Milwaukee MI 106 User manual

Milwaukee

Milwaukee MW806 MAX User manual

Milwaukee

Milwaukee MW150 User manual

Milwaukee

Milwaukee CALIBRATION 2238-20 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual