Mills TS MILLS Mounting instructions
TS MILLS
USE MANUAL
Infrastructure
USE MANUAL
TSMILLS
©Copyright 2016 Mills Estruturas e Serviços de Engenharia S.A.
The copying of this publication by any means or process is forbidden, even if
partially, without previous and written authorization both of the owners and the
intellectual authors.
THIS MANUAL WAS PRODUCED AT
ENGENHARIA NACIONAL
Mills Estruturas e Serviços de Engenharia S.A.
Estrada do Guerenguê, 1381 - Curicica
22713-001 - Rio de Janeiro | RJ
Tel: (21) 2132-4338
www.mills.com.br
SUPERVISED BY
Avelino Pinto da Silva Garzoni
ENGINEERING DIRECTOR
Vinícius Monteiro
ENGINEERING MANAGER
Claudinei Palma de Lima
TECHNICAL MANAGER
Miguel Henrique de Oliveira Costa
TECHNICAL COORDINATOR
Cardec Barcelos Lomeu Bastos
TECHNICAL COORDINATOR
Mário Luiz Sartorio Valiati
DESIGN COORDINATOR
TITLE
USE AND ASSEMBLY MANUAL | TS MILLS SYSTEM
ISSUE 2
Maio - 2016 | Edição 2 — 04.09.05.2016
TECHNICAL TEXT
Cardec Barcelos Lomeu Bastos
Claudinei Palma de Lima
Mário Luiz Sartorio Valiati
DESIGNS, ASSEMBLIES AND ILLUSTRATIONS
João Gabriel Coelho de Salles Victor
Laryssa da Cunha Macedo
Priscilla dos Santos Oliveira
Roberta da Costa Melo
DESIGNS, ASSEMBLIES AND ILLUSTRATIONS
André Durval de Andrade
Gustavo dos Santos Araújo
Jeisson Alves de Carvalho
Laryssa da Cunha Macedo
Marcelo Amancio Lages
Priscilla dos Santos Oliveira
Roberta da Costa Melo
Robson Ferreira das Neves
Thaís Cristina de Carvalho Araújo
Márcia Rita Santanna da Silva
TEXT EDITION
Laryssa da Cunha Macedo
Priscilla dos Santos Oliveira
Roberta da Costa Melo
COLLABORATORS
Wagner de Oliveira
Yuri de Amorim
REVISION
Cardec Barcelos Lomeu Bastos
Claudinei Palma de Lima
Bruno da Costa Ribeiro
Mário Luiz Sartorio Valiati
SUMMARY
10 SYSTEM DESCRIPTION
11 POSSIBILITY OF USING THE TS MILLS SYSTEM
SLABS AND BEAMS
16 TS MILLS SYSTEM ELEMENTS
TS METALLIC TOWERS
18 TUBULAR FRAMES
TS3 AND TS4 FRAME
21 STANCHIONS
22 STANCHIONS ASSEMBLY
23 DX - “X” DIAGONALS FOR BRACING
25 DX VISUAL IDENTIFICATION
26 DTT TS - TRANSVERSE DIAGONAL FOR TS
28 DTT VISUAL IDENTIFICATION FOR TS
29 DTT USE RULE
31 SHOES
33 FIXED SHOE
34 ADJUSTABLE SHOE -TS
ELONGATED SHOE
35 USE OF ADJUSTABLE AND ELONGATED SHOES IN UNEVEN
SUPPORT
36 SUPPORTS FOR TS
37 SINGLE ADJUSTABLE SUPPORT TS
38 DOUBLE ADJUSTABLE SUPPORT TS
39 DOUBLE BASE FOR SUPPORT
40 RULE FOR USING THE DOUBLE BASE
41 KNEE BRACE
43 10T METALLIC TOWER
44 COMPONENTS OF THE 10T METALLIC TOWER
10T FRAME
45 10T STANCHION
46 DX 10T - “X” BRACING DIAGONALS
47 DTT 10T - TUBULAR TRANSVERSE DIAGONAL
48 10T ADJUSTABLE SHOE
49 10T ADJUSTABLE SUPPORT
50 ACCESSORIES FOR TS AND 10T TOWER
COUPLING ANGLE
52 METALLIC TOWER ASSEMBLY (TS OR 10T)
54 MILLSLOCK TOWER
55 MILLS TOWER
56 METALLIC STRUTS
57 METALLIC STRUT MODELS
59 TELESCOPIC SUPPORT I (WITH AND WITHOUT SHOE)
60 TELESCOPIC SUPPORT II (WITH AND WITHOUT SHOE)
61 2T STRUT
62 ALUMILLS STRUT
63 DECK STRUT
65 ACCESSORIES FOR FIXED SUPPORT STRUTS
66 TRIPODS
67 TUBULAR TRIPOD
68 ALUMILLS TRIPOD
69 UNIVERSAL TRIPOD
70 TRIPOD USE RULE
71 ALUMILLS PITCHFORK
72 CROSSHEADS AND SUPPORT T
CROSSHEAD I
73 CROSSHEAD II
74 SUPPORT T
75 METALLIC BEAMS
76 ALUMINUM BEAMS (VA 140, VA165, VA 165 DOUBLE CORE)
78 STEEL BEAMS (VJ2”, VJ3”, VJ5” AND VJ7”)
79 VJ2
80 VJ3
81 VJ5
82 VJ7
83 SUPPORT FOR BODYGUARD VJ5 AND VA 140
84 METALLIC SHAPES
SHAPE I (I 6”, I8”, I10” AND I12” AMERICAN STANDARD)
85 ALUMA RISER
86 RISER SPLICE PLATE
87 OTHER ELEMENTS
METALLIC YOKES
88 INNER YOKE
89 PERIPHERY YOKE
91 PERIPHERY YOKE BODYGUARD SUPPORT
GUIDE SYSTEM AND SUPPORTS FOR BUCKETS
GUIDES FOR REPROPPING RANGE
CONTINUOUS GUIDE
92 BUCKET SUPPORT
OPERATION PRINCIPLE OF THE COMPONENTS
93 ASSEMBLY STEPS
96 PIPES AND CLAMPS
MILLS PIPE
97 CLAMPS
1/49 AND 2/49 CLAMP
2/49/60 CLAMP
98 TYING COLUMN
99 FIXED AND HINGED CLAMP
100 PILLAR PLUMBER II
101 METALLIC CLIP, SUPPORT PLATE, TIE ROD AND WING NUT
102 TECHNICAL USE INSTRUCTIONS
PILLARS
PILLAR LOCKING AND PLUMBING
104 BEAMS
OUTER BEAMS / PERIPHERY / EDGE
STRUTS WITH CROSSHEADS AND T SUPPORT
105 PROPPING WITH TOWER
106 PROPPING USING BRACE
107 PERIPHERY YOKES
108 INNER BEAMS
PROPPING WITH CROSSHEADS AND T SUPPORT
109 PROPPING WITH TOWER
111 INNER YOKES
114 BEAM LOCKING
115 SOUND SLABS PROPPING
119 BRACING WITH STRUTS
120 BRACING WITH TOWERS
121 MIXED PROPPING
DOUBLE AND SINGLE BASE PROPPING
122 SAFETY RECOMMENDATIONS
SAFETY, PPE’S AND TOOLS
123 DESCRIPTION OF THE TS MILLS TS MILLS SYSTEM COMPONENTS
137 ANNEXES
Other Mills Construction Equipment manuals
