sbava.pdf St. 07/04/16 Printed in Germany
MT3
Shoring System MT 60
Please observe Contents
This Technical Instruction Manual contains information, instructions
and hints describing how to use the MEVA equipment on the con-
struction site in a proper, quick and economic way. Most examples
shown are standard applications that will occur in practice most
often. For more complicated or special applications not covered
in this manual, please contact the MEVA experts for advice. When
using our products the federal, state and local codes and regula-
tions must be observed. Many of the details shown do not illustrate
the wall formwork system in the ready-to-pour condition as to the
aforementioned safety regulations. Please adhere to this manual
when applying the equipment described here. Deviations require
engineering calculations and analysis to guarantee safety.
Please observe the assembly instructions that your local contractor
or employer has created for the site on which the MEVA equipment
is used. Such instructions are intended to minimise site-specific risks
and must contain the following details:
¢ The order in which all working steps including assembly and
disassembly must be carried out
¢ The weight of the panels and other system parts
¢ The type and number of ties and braces as well as the distance
between them
¢ The location, number and dimensions of working scaffolds
includ ing working area and protection against falling down
¢ Pick points for panel transport by crane. With regard to panel
tranport, please observe this manual. Any deviation will require a
static proof.
Important: Generally, only well maintained material may be used.
Damaged parts must be replaced. Apply only original MEVA spare
parts for replacement.
Attention: Never wax or oil assembly locks.
Product overview .................................................................................4
Integrated safety features ...................................................................6
Planking ................................................................................................7
Basic tower 170 x 170 – Vertical assembly .......................................... 8
Basic tower 170 x 170 – Horizontal assembly flat on the ground ...14
Tower 170 x 340 – Vertical assembly ................................................. 15
Working platform between two towers ..........................................19
Transport by crane .............................................................................20
Transport on wheels ...........................................................................21
Use with slab formwork MevaDec ...................................................22
Use with slab formwork MevaFlex ....................................................23
Disassembly ......................................................................................... 24
Height configurations from 2.51 to 6.42 m ......................................25
Height configurations from 6.84 to 8.46 m ......................................26
Height configurations from 9.65 to 12.54 m ....................................27
Material list – Tower heights from 2.01 to10.76 m .......................... 28
Material list – Tower heights from 10.16 to 18.66 m ....................... 29
Transport and storage ........................................................................30
Important work and handling rules .................................................. 31
Service .................................................................................................32
