Johnson Controls Tyco Kantech KT-400 Quick start guide

Application Note

Connecting an OSDP HID reader to a KT-400 controller

Use this application note to wire a HID reader using OSDP protocol to a KT-400 controller

and to configure the setup in EntraPass.

Requirements

•KT-400 Controller firmware 3.00.07 or higher

•EntraPass Special, Corporate, or Global Edition 8.40 or later

•HID Reader with OSDP communication

•HID Reader Manager mobile application

•Mobile device with Bluetooth

Note: Kantech have implemented Open Supervised Device Protocol (OSDP) 2.2. OSDP is

an access control communications standard developed by the Security Industry Association

(SIA). For more information about the protocol, refer to

https://www.securityindustry.org/industry-standards/open-supervised-device-protocol/.

Wiring the HID reader to the KT-400 controller

Use the RS-485 COM (COM2) port for OSDP communication.

1. Disconnect the power to the KT-400 controller.

2. Connect the reader’s red wire to the +12VDC.

3. Connect the reader’s black wire to the earth ground GND.

4. Connect the reader’s white wire to the COM 485 +.

5. Connect the reader’s green wire to the COM 485 -.

For more information about installing and wiring the KT-400 controller, refer to the KT-400

Four-Door Controller Installation Guide.

Configuring the card reader using the HID mobile app

Use the HID Reader Manager mobile application to set up the HID card reader.

1. Install the HID Reader Manager app on a device that has Bluetooth.

2. Open the app and tap Scan For Readers.

3. Tap the reader that you want to configure.

4. Tap Software and tap Configure.

5. Tap Inspect. Follow the instructions on the screen.

6. Tap Detailed Configuration and tap Communication Protocol.

7. Tap Host Protocol and enable OSDP.

8. In the ADDRESS field, enter an address. Addresses start at 0 in EntraPass. Refer to

your EntraPass system for the next available address.

9. Tap ADD TO TEMPLATE.

10. In the OSDP BAUD RATE field, enter the baud rate that you configured in

EntraPass.

Application Note D29011149R001

11. Click Apply Selected Items.

For more information about installing and using the mobile app, refer to the HID© Signo™

Reader Installation Guide and the HID© Reader Manager™ Solution User Guide.

Configuring the HID reader in EntraPass

1. On the EntraPass workstation, click the Devices tab, and click Controller.

2. From the Controller list, select the controller you have connected the HID reader to.

3. In the Controller window, click the KT-400 tab.

4. From the COM2 Protocol list, select OSDP. The RS-485 baud rate changes to 9600

and the Reader template changes to Default OSDP reader template. You can

update these items.

5. Complete one of the following options:

•To manually add readers, complete the following steps:

a. Click the OSDP tab.

b. Click Add and, in the Address column, select or type the OSDP reader

address. Accepted values range from 0 to 126.

c. In the Door column, select the door to associate with the reader.

d. Click Save.

Note: This is the recommended option.

•To add unassigned readers automatically, complete the following steps:

a. On the Controller window toolbar, click the Request unassigned modules

icon.

b. In the Request unassigned modules window, right-click the appropriate

reader and select Assign module.

c. Click Save.

Note: This feature works only for addresses 0 to 10 at the default baud rate of

9600.

For more information about setting up controllers and readers in EntraPass, refer to the

EntraPass Administration Guide.

trademarks of Johnson Controls.

Technical support contact telephone numbers: 1 450 444 2030. Toll free: 1 888 222 1560.

www.kantech.com

Other manuals for Tyco Kantech KT-400

This manual suits for next models

Table of contents

Other Johnson Controls Controllers manuals

Johnson Controls

Johnson Controls VCC-64 User manual

Johnson Controls

Johnson Controls LP-NRM653-000C User manual

Johnson Controls

Johnson Controls G77 Series User manual

Johnson Controls

Johnson Controls Facility Explorer FX20 User manual

Johnson Controls

Johnson Controls Tyco KT-1 User manual

Johnson Controls

Johnson Controls tyco iSTAR Ultra Operator's manual

Johnson Controls

Johnson Controls FAC3611 User manual

Johnson Controls

Johnson Controls RA-3 Series Owner's manual

Johnson Controls

Johnson Controls VA9204-B-2 Series User manual

Johnson Controls

Johnson Controls FX-PCV18 Series User manual

Johnson Controls

Johnson Controls LC-AVMHTC1-0 User manual

Johnson Controls

Johnson Controls FW-08 User manual

Johnson Controls

Johnson Controls ATC1510 User manual

Johnson Controls

Johnson Controls G961DAJ User manual

Johnson Controls

Johnson Controls VA9208-AG Series User manual

Johnson Controls

Johnson Controls FX80 User manual

Johnson Controls

Johnson Controls tyco Power Neo HS2016 User manual

Johnson Controls

Johnson Controls LP-FX2211T-0 User manual

Johnson Controls

Johnson Controls M9108 Series User manual

Johnson Controls

Johnson Controls CIS01 User manual

Johnson Controls

Johnson Controls PENN ACT2 Service manual

Johnson Controls

Johnson Controls F4-CV Series User manual

Johnson Controls

Johnson Controls M91 GDA-1N Series User manual

Johnson Controls

Johnson Controls FMS-2000C User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual