1. Incorrect installation contrary to manual guidelines, or other equipment interference, may
cause error or inaccurate test results. To solve the interference problem, you should:
-Separate power supply from the equipment that is causing interference.
-Use a power supply committed only to the device.
-Please contact InBody if the problem continues.
2. Excessively high or low temperatures, humidity and pressure may affect the equipment
operation and may cause errors. Please use the equipment within the suggested
specification range for use.
3. While moving, installing, or using this product, be sure to protect against any physical
shock or damage. Always use the packing material and the original shipping box when
moving or transporting this product.
4. Repair and examination should be conducted only by InBody’s professional Customer
Service staff. Please contact InBody if needed.
5. The BSM370 fulfills the Standards of IEC61010-1(EN61010-1), Safety requirements of
Electrical Equipment. In addition, the BSM370 complies not only Noise Immunity, but also
Noise Emission by the Standard IEC61000(EN61000),Electromagnetic Compatibility Requir
ements(EMC requirements).
6. The BSM370 has been designed, manufactured, and inspected under the full quality
assurance system of InBody. InBody fulfills the international standardization system,
