inbody BPBIO320 User manual
User’s Manual
Please note the important information below before reading this manual.
Failure to observe these precautions can result in personal injury or equipment damage.
Warning
Failure to comply with safety precautions can damage the equipment.
Caution
Referring to notes can help improve equipment use.
Caution
©2019 InBody Co., Ltd. All rights reserved. BM-ENG-82-F-190710
InBody Co., Ltd. [HEAD OFFICE]
InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA
TEL: +82-2-501-3939
FAX: +82-2-578-2716
Website: https://www.inbody.com
E-mail: info@inbody.com
©2019 InBody Co., Ltd. All rights reserved.
Reproduction, adaptation, or translation of this manual is prohibited without prior written consent from InBody Co., Ltd.
under the copyright laws. This manual may be printed incorrectly and subject to change without notice. InBody
Co., Ltd. shall not be liable for any errors, incidental, or consequential damages that occurred by not complying
with the content of the User᾽s Manual.
Visit our website (www.inbody.com) to view and download additional information about the BPBIO320/320n. InBody Co.,
Ltd. reserves the right to modify the appearance, specifications, etc. of this product to improve its quality, without prior notice.
Representative & Sponsor Information
InBody Europe B.V.
Gyroscoopweg 122, 1042 AZ, Amsterdam, The Netherlands
TEL: +31-20-2386080 Website: https://nl.inbody.com E-mail: info.eu@inbody.com
Australian Sponsor. [AUSTRALIA]
Emergo AUSTRALIA. Level 20, Tower II, Darling Park, 201 Sussex Street, Sydney, NSW 2000, AUSTRALIA
TEL: +61-2-9006-1662 FAX: +61-2-9006-1010 Website: https://www.emergogroup.com E-mail: [email protected]
Customer Service Information
InBody [USA]
13850 Cerritos Corporate Dr., Unit C, Cerritos, CA 90703, USA
TEL: +1-323-932-6503 FAX: +1-323-952-5009 Website: https://www.inbody.com E-mail: contact@inbody.com
InBody Japan Inc. [JAPAN]
Tani Bldg., 1-28-6, Kameido, Koto-ku, Tokyo 136-0071 JAPAN
TEL: +81-3-5875-5780 FAX: +81-3-5875-5781 Website: https://www.inbody.co.jp E-mail: inbody@inbody.co.jp
InBody China. [CHINA]
904, Xing Di Plaza, No. 1698 Yishan Road, Shanghai, 201103, CHINA
TEL: +86-21-64439738, 9739, 9705
FAX: +86-21-64439706
Website: https://www.inbody.com
E-mail: [email protected]
User’s Manual Contents
I. BPBIO320/320n Installation
A. Product Components
B. Operating Environment
C. Installation Instructions
D. Loading and Reloading Printer Paper
(BPBIO320 only)
E. Replacing Cuff Cover
F. Setup
G. Connecting to InBody
H. Connecting to Coin Device(InCoin)
I. Precautions for Maintenance
II. Blood Pressure Test
A. Precautionary Steps
B. Test Instructions
C. Test Posture
III.
Transportation and Storage
A. Cautions during Transportation
B. Repacking Instructions
C. Transportation and Storage Environment
IV. FAQ
A. Error Code
B. Regarding the Equipment
C. Regarding the Test
V. Others
A. Exterior and Functions
B. Safety Information
C. Product Classication
D. Specications
E. EMC Information (Declaration)
4
4
5
9
11
13
18
19
20
21
21
24
25
26
26
27
27
30
32
33
33
34
35
4 5
B. Operating Environment
Please make sure the environment is adequate for the BPBIO320/320n installation. This equipment is designed
for indoor use. If installing the equipment outdoors, the following requirements must be fullled:
Temperature range 10 to 40ºC (50 to 104ºF)
Relative humidity 30 to 75% RH
Atmospheric pressure range 70 to 106 kPa
I.BPBIO320/320n Installation
A. Product Components
The BPBIO320/320n consists of the following components. Make sure the following components are present.
*Please check each component of the system for damage prior to installation.
Basic Components
BPBIO320/320n
Power cable (AC 250V 10A 1.8m) 1 EA
Information Panel
Two rolls of printing paper (BPBIO320 only)
Two cuff covers (One installed)
User’s Manual
Optional components
Desk for BPBIO320/320n, and two screws
Chair for BPBIO320/320n
Coin device(InCoin)
BPBIO320/320n
User’s Manual
BPBIO320/320n
User’s Manual
BPBIO320/320n
User’s Manual
4 5
C. Installation Instructions
1. Open the BPBIO320/320n box, and remove the air cushion (small size). Unfold the air cushion (large size) and
take out the BPBIO320/320n from the box, and then remove the protective box. Take off the protective vinyl
out of the BPBIO320/320n, and remove the packing material.
•Do not carry the equipment by holding the cuff.
•Keep packing material to repack the BPBIO320/320n at a later time. Dispose of trash according to local laws and
regulations.
•Refer to the figure below when transporting the BPBIO320/320n.
Caution
Air cushion
(large size)
Air cushion
(small size)
Packing material
Protective box
Package protective vinyl
6 7
2. Place the equipment on a solid table that can withstand the weight of the BPBIO320/320n (approx. 9kg).
If desk for the BPBIO320/320n is available, align the grooves on the bottom of the BPBIO320/320n
with the grooves on the desk and secure them with two xing screws.
*Desk for the BPBIO320/320n sold separately.
3. Mount the Information Panel onto the BPBIO320/320n.
4. Connect the power cable provided with the BPBIO320/320n. Plug the power cable into a grounded 3-prong outlet.
*The anti-theft groove can be used to secure the equipment to the table.
Desk xing grooves
Desk grooves
Fixing screws
•Install the BPBIO320/320n on a flat, vibration-free floor.
If the equipment is installed where the floor is not flat, it may topple during a test or the test results may be
inaccurate.
Caution
Anti-theft groove
3-socket outlet
Grounded outlet
6 7
5. Use the anti-theft groove to prevent theft.
*Theft protection cable is sold separately.
•Do not install the equipment where the power cable is difficult to disconnect.
•Do not plug or disconnect the power cable with wet hands. There is a risk of electric shock.
•Always use an outlet supplied to the correct power supply (AC 100-240 V). An incorrect power supply may
cause fire or malfunctions.
•Do not disassemble the equipment arbitrarily. This may cause electric shock, injury, product malfunction, and/
or inaccurate results. Unauthorized disassembly will void the manufacturer’s warranty.
•Do not let the BPBIO320/320n touch with other electronic devices when on. This may cause electric shock.
Warning
•Plugging the device into an ungrounded outlet may cause malfunction or electric shock.
Caution
6. Turn the BPBIO320/320n on by pressing the power switch located on the back of the device.
7. When the BPBIO320/320n is turned on, the following screen is displayed and a calibration is automatically
performed.
Power Switch
•Do not operate or touch the device while it is calibrating. It may cause errors to future tests.
Caution
8 9
8. Adjust the volume by turning the volume knob on the rear of the BPBIO320/320n.
8 9
D. Loading and Reloading Printer Paper (BPBIO320 only)
1. Loading Printer Paper
1) Cut off the end of the printer paper with scissors. If the end of the paper is ripped, it may cause a
paper jam or damage the printer head.
2) Open the cover by pressing ‘PUSH’ while the BPBIO320/320n is turned on.
3) If the device is being used for the rst time, remove the protective paper located inside.
*The protective paper (thermal printing paper) is in the printer groove. Pull upward to remove it.
4) Fold one corner of the provided printer paper and insert it in the direction as shown.
Paper cut with scissors
Ripped paper
감열지를
윗방향으로
잡아당겨
제거후
사용하세요
•The printer will not work if the paper is inserted incorrectly.
Caution
10 11
5) Insert the end of the paper through the feeder. The printer will automatically pull and cut the paper.
6) Remove the cut paper, and close the printer paper cover.
2. Reloading Printer Paper
1) Open the cover by pressing ‘PUSH’ mark on the bottom center of it while the BPBIO320/320n is turned
on.
2) Press button to remove the remaining paper.
3) Reload a new roll of printer paper by following the instructions for ‘Loading Printer Paper'.
•Remove all trash from previous printer paper rolls.
Caution
•Two rolls of printer paper are provided with the BPBIO320/320n.
Note
This manual suits for next models
1
Table of contents
Other inbody Measuring Instrument manuals
inbody
inbody H30NWi User manual
inbody
inbody InBody970 User manual
inbody
inbody J30 User manual
inbody
inbody 720 User manual
inbody
inbody 970 User manual
inbody
inbody S10 User manual
inbody
inbody BSM270 User manual
inbody
inbody PUSH User manual
inbody
inbody InBody370S User manual
inbody
inbody 720 User manual
inbody
inbody InBody570 User manual
inbody
inbody BSM 370 User manual
inbody
inbody 270 User manual
inbody
inbody InBody270 User manual
inbody
inbody BSM170 User manual
inbody
inbody S10 User manual
inbody
inbody 370 Manual
inbody
inbody BPBIO210 User manual
inbody
inbody BSM 370 User manual
inbody
inbody 230 User manual
