IFM SM6x04 User manual

Operating instructions
Magnetic-inductive flow meter
SM6x04
SM7x04
SM8x04
80223776 / 00 11 / 2018
UK

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������3
2 Safety instructions �����������������������������������������������������������������������������������������������3
3 Functions and features ����������������������������������������������������������������������������������������4
4 Function���������������������������������������������������������������������������������������������������������������5
4�1 Processing of the measured signals��������������������������������������������������������������5
4�2 Direction of flow ���������������������������������������������������������������������������������������������5
4�3 Analogue function ������������������������������������������������������������������������������������������6
4�4 Measured value damping (dAP) ��������������������������������������������������������������������7
5 Mounting��������������������������������������������������������������������������������������������������������������8
5�1 Recommended installation position���������������������������������������������������������������8
5�2 Not recommended installation position����������������������������������������������������������9
5�3 Grounding����������������������������������������������������������������������������������������������������10
5�4 Installation in pipes �������������������������������������������������������������������������������������� 11
6 Electrical connection������������������������������������������������������������������������������������������12
7 Operating and display elements ������������������������������������������������������������������������13
8 Menu������������������������������������������������������������������������������������������������������������������14
9 Set-up ����������������������������������������������������������������������������������������������������������������16
10 Parameter setting ��������������������������������������������������������������������������������������������16
10�1 Parameter setting in general ���������������������������������������������������������������������17
10�1�1 Change to the menu "Extended functions"���������������������������������������17
10�1�2 Locking / Unlocking ��������������������������������������������������������������������������17
10�1�3 Timeout���������������������������������������������������������������������������������������������18
10�2 Scaling of the analogue value for temperature (OUT1)�����������������������������18
10�3 Scaling of the analogue value for volumetric flow (OUT2) ������������������������18
10�4 User settings (optional)������������������������������������������������������������������������������18
10�4�1 Determine the standard unit of measurement for volumetric flow ����18
10�4�2 Determine the standard unit of measurement for temperature���������18
10�4�3 Standard display�������������������������������������������������������������������������������18
10�4�4 Measured value damping �����������������������������������������������������������������18
10�4�5 Error behaviour of the outputs ����������������������������������������������������������19
10�5 Service functions ���������������������������������������������������������������������������������������19
10�5�1 Read min/max values �����������������������������������������������������������������������19

3
UK
1 Preliminary note
►Instructions
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note�
CAUTION
Warning of personal injury�
Slight reversible injuries may result�
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer of the system is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the manu-
facturer of the system�
10�5�2 Restoring the factory settings �����������������������������������������������������������19
11 Operation ���������������������������������������������������������������������������������������������������������19
11�1 Reading the process value ������������������������������������������������������������������������19
11�2 Changing the process value display in the RUN mode������������������������������20
11�3 Reading the set parameters�����������������������������������������������������������������������20
12 Troubleshooting �����������������������������������������������������������������������������������������������21
13 Technical data��������������������������������������������������������������������������������������������������21
14 Factory setting ������������������������������������������������������������������������������������������������22

4
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• Protect units and cables against damage�
3 Functions and features
The unit monitors liquid media� It detects the 2 process categories volumetric flow
and medium temperature�
Pressure Equipment Directive (PED)
The units comply with the Pressure Equipment Directive and are designed and
manufactured for group 2 fluids in accordance with the sound engineering prac-
tice� Use of group 1 fluids on request�
Application area
Conductive liquids with the following properties:
• Conductivity: ≥ 20 µS/cm
• Viscosity: < 70 mm2/s at 40 °C; < 70 cSt at 104 °F

5
UK
4 Function
• The unit detects the flow based on the magnetic-inductive volumetric flow
measuring principle�
• The unit also detects the medium temperature�
• The unit displays the current process value�
4.1 Processing of the measured signals
The unit generates 2 output signals according to the parameter settings:
OUT1: Parameter setting
- Analogue signal for temperature → 10.2
OUT2: Parameter setting
- Analogue signal for volumetric flow quantity → 10.3
4.2 Direction of flow
In addition to the flow velocity and the volumetric flow quantity, the unit also
detects the direction of flow�
An arrow with the text "flow direction" on the unit indicates the positive flow
direction�
Flow... Process value display
corresponds to the marked flow direction + (positive)
against the marked flow direction - (negative)
Only positive process values are processed for the signal output�

6
4.3
Analogue function
• The unit provides an analogue signal that is proportional to the volumetric flow
quantity and the medium temperature�
• Within the measuring range the analogue signal is 4���20 mA�
• If the measured value is outside the measuring range or in the event of an
internal error, the current signals indicated in Figure 1 are provided�
• The measuring range is scalable:
[ASP] determines at which measured value the output signal is 4 mA�
[AEP] determines at which measured value the output signal is 20 mA�
Minimum distance between [ASP] and [AEP] = 20 % of the final value of
the measuring range�
MAW Initial value of the measuring range For non-scaled measuring range
(= factory setting)
MEW Final value of the measuring range
ASP Analogue start point For scaled measuring range
AEP Analogue end point
Table 1: Definitions
MEWMAW AEPASP
Q [% MEW]
[°C]T -20-40-50 80 100 110
[°F]176-4-58 -40 212 230
120
1000-120-130 130
4
3,5FOU=OFF
20
21,5
22
[mA]
FOU=On
1
2
5
4
6
5*
6*
3
Err UL OL Err
Figure 1: Characteristics of the analogue output according to the standard IEC 60947-5-7�

7
UK
Q: Flow (a negative flow value means flow against the marked flow direction)
T: Temperature
UL: Below the display range
OL: Above the display range
Err: The unit is in the error state
FOU=On: Default setting at which the analogue signal goes to the upper final value in
case of an error�
FOU=OFF: Default setting at which the analogue signal goes to the lower final value in
case of an error�
1
Analogue signal
2
Measured value (flow or temperature)
3
Detection zone
4
Display range
5
Measuring range
5*
Analogue signal in the measuring range
with factory setting
6
Scaled measuring range
6*
Analogue signal for scaled measuring
range
4.4 Measured value damping (dAP)
The damping time allows to set after how many seconds the output signal has
reached 63 % of the final value if the flow value changes suddenly� The set damp-
ing time stabilises the outputs and the display� The signals [UL] and [OL] (→ 12)
are defined under consideration of the damping time�

8
5 Mounting
CAUTION
If the medium temperature is above 50 °C (122 °F) parts of the housing can
increase in temperature to over 65 °C (149 °F)�
> Risk of burns�
►Protect the housing against contact with flammable substances and
unintentional contact�
►Attach the supplied warning label to the sensor cable�
►Ensure that the system is free of pressure during installation�
►Ensure that no media can leak at the mounting location during installa-
tion�
►Avoid deposits, accumulated gas and air in the pipe system�
The unit can be installed independently of the orientation if the following is
ensured:
- No air bubbles can form in the pipe system�
- The pipes are always completely filled�
5.1 Recommended installation position
►Install the unit so that the measuring pipe is always completely filled�
►Arrange for inlet and outlet pipe lengths� Disturbances caused by bends,
valves, reductions, etc� are compensated for� It applies in particular: no shut-off
and control devices are allowed directly in front of the unit�
3 x D
F
S
1 x D
S
S = disturbance (e�g� shut-off / control device, pump, bends)
D = pipe diameter
F = direction of flow

9
UK
►Install in front of or in a rising pipe�
F
F
5.2 Not recommended installation position
►Avoid the following installation positions:
F
F
Directly in front of a falling pipe� In a falling pipe�

10
F
F
Directly in front of
the spout of the pipe� On the suction side of a pump�
F
At the highest point of the pipe system�
F = flow direction
5.3 Grounding
If installed in an ungrounded pipe system (e�g� plastic pipes), the unit must
be grounded (functional earth)�
Ground brackets for the M12 connector are available as accessories
→ www.ifm.com.
This manual suits for next models
2
Table of contents
Other IFM Measuring Instrument manuals

IFM
IFM efector 300 SI0558 User manual

IFM
IFM SDG 50 Series User manual

IFM
IFM LW2720 User manual

IFM
IFM LR8010 User manual

IFM
IFM Efector 300 SL5204 User manual

IFM
IFM efector 300 SD2001 User manual

IFM
IFM SM2 00 Series User manual

IFM
IFM SI0558 User manual

IFM
IFM ZZ0600 Manual

IFM
IFM SL010 Series User manual































