ICI FMX 400 P Series User manual
FMX 400 P SERIES IR CAMERA
USER MANUAL
MedicalMedical
Edit Text Outlines
2105 W. Cardinal Dr. Beaumont, TX 77705
PLEASE READ THIS MANUAL BEFORE SWITCHING THE UNIT ON.
IMPORTANT SAFETY INFORMATION INSIDE.
ICI cameras fall under US Federal Law and Export Control.
THIS DEVICE IS INTENDED FOR ADJUNCTIVE USE.
NOT MEANT FOR STANDALONE DIAGNOSTICS.
FMX 400 P SERIES IR CAMERA USER MANUAL
2
©Copyright 2021, Infrared Cameras, Inc. - All rights reserved. The contents
of this document may not be reproduced in whole or in parts without the
written consent of the copyright owner.
Printed in the United States of America.
2105 W. Cardinal Dr.
Beaumont, TX 77705
(866) 861-0788
www.infraredcameras.com
THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE SPECIFICATIONS
OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE MANUFACTURER
ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT ANY PRELIMINARY
OPINION THE TECHNICAL SPECIFICATIONS OF THE PRODUCT. THIS
MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR TYPOGRAPHICAL
ERRORS.
NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS
IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER
WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE PROVIDED
“AS IS” WITH ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR
ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE
ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET
THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN
BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE
LICENSE OR LIMITED WARRANTY, CONTACT YOUR ICI REPRESENTATIVE
FOR A COPY.
IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT
OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
FMX 400 P SERIES IR CAMERA USER MANUAL
3
1. General Description
2. Safety Information
3. Intended Use
4. Technical Specifications
5. Structure
6. Package Contents
7. Installation Instructions
8. Computer Setup
9. Cleaning and Maintenance
10. Site and System Validation Checklist
11. Troubleshooting
12. About ICI
Contents
4
4
4
5
6
7
8
13
14
15
18
20
FMX 400 P SERIES IR CAMERA USER MANUAL
4
1. General Description
2. Safety Information
FMX 400 Series IR cameras are specially designed to take the body temperature of a
person and to report the total number of persons scanned. The system has been widely
applied for inspection services, and is available for adjunctive use in: hospitals, and sub-
acute healthcare settings public areas, i.e. airports.
• This device must be installed by qualified service personnel or system installation
personnel.
• Do take precautions to prevent the lens from being worn, scratched or broken. Avoid
touching the lens to prevent it from being damaged or getting dirty.
• Given that the uncooled thermal infrared image camera uses a very sensitive thermal
sensor, under no circumstances (powered on or off) should the lens be pointed
directly at a strong radiation source (such as sun, direct or reflected laser beam, etc.),
otherwise permanent damage will be caused to the uncooled thermal imager.
• This product is a precise electronic device that must be handled with care during use,
storage, and transportation to prevent dangerous actions such as the device being hit
by external force, or falling from heights.
• During transportation and storage, the ambient temperature must not be lower than
• Prior to start of the device, make sure that the power supply is properly connected. If
the power supply is connected incorrectly, the device may be damaged.
• Do not place any objects on the power cord, and do not place the device where the
power cord can be easily touched.
• If the device operates abnormally, please contact the supplier and do not dismantle
the device on your own.
• Do not drop or throw the device.
• Do not put the product into a fire.
• It is recommended to calibrate the device annually.
3. Intended Use
FMX 400 Series IR cameras are designed for body surface temperature measurement of
infants and adults without contacting the human body.
FMX 400 P SERIES IR CAMERA USER MANUAL
5
4. Technical Specifications
Detector Array UFPA
17
FOV
Measurement Distance Lens dependent
384 x 288
50 Hz NTSC/PAL
14-bit
5% to 95% non-condensing
Accuracy
> 99 %
119 mm x 55 mm x 55 mm (L x W x H +/- .5 mm)
DC 110V 10 - 36, < 3 W
< 370 g
Interface RJ-45 Ethernet
raw data
0.01 to 1.0
IP 54
Built-in shutter
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FMX 400 P SERIES IR CAMERA USER MANUAL
6
5. Structure
1. Coaxial plug interface
2.
3.
1.
2.
3.
FMX 400 P SERIES IR CAMERA USER MANUAL
7
6. Package Contents
Coaxial Cable
Power AdapterEthernet CableFMX Series IR Camera
Software USB Drive
Temperature Reference AC Power Cord
ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE
PRESENT BEFORE BEGINNING INSTALLATION
FMX 400 P SERIES IR CAMERA USER MANUAL
8
7. Installation Instructions
B.
Mount the Temperature Reference to
a tripod using the ¼-20 mount. Plug power cord into Temperature Reference.
A.
SELECT AN APPROPRIATE AREA FREE OF IMMEDIATE AIRFLOW
FROM DOORWAYS AND AIR CONDITIONING/VENTILATION
SYSTEMS. THE SELECTED AREA SHOULD HAVE A STABLE
FMX 400 P SERIES IR CAMERA USER MANUAL
9
MAKE SURE TRIPODS DO NOT BLOCK THE DIRECT PATH OF
NOT BE MOVED OR KNOCKED DOWN.USING A DIVIDING BARRIER
WILL HELP KEEP TRIPODS SEPARATE FROM THE PATH.
D.
Mount the FMX Series IR Camera to a
tripod using the ¼-20 mount.
C.
Plug power cord into a 110/120V
electrical outlet.
FMX 400 P SERIES IR CAMERA USER MANUAL
10
G. H.
Attach coaxial cable to back of
the FMX Series IR Camera.
Right to tighten. Left to loosen.
Plug jack end of power adapter into
barrel end of coaxial cable.
E. F.
Plug Ethernet cable into the Ethernet port
of the FMX Series IR Camera.
Plug the other end of the Ethernet cable
into the Ethernet port of the computer.
ENSURE THE CAMERA LENS AND TEMPERATURE REFERENCE
SOURCE ARE FACING EACH OTHER ON PARALLEL PLANES. MAKE
SURE CAMERA TARGET AREA
BACKGROUND.
Table of contents
Other ICI IP Camera manuals
ICI
ICI SOUND DETECTAI User manual
ICI
ICI T-CAM 160 XT P Series User manual
ICI
ICI GAS DETECTIR Series User manual
ICI
ICI FM 384 P Series User manual
ICI
ICI FM PLUS P Series User manual
ICI
ICI 9320 Series User manual
ICI
ICI FM 384 P Series User manual
ICI
ICI 8000 Series User manual
ICI
ICI FMX 320 Series User manual
