HunterDouglas Luxaflex PowerView User manual

PowerView® IRB Roller Blind Reference-guide

Congratulations with the purchase of a Luxaex® PowerView® Roller blind. This guide helps you get started with your

Roller blind powered by an integrated Li-ion battery.

1. Delivery condition

1.1. Pebble® or wand remote / Scene controller or Hub are purchased seperately

Pebble remote Scene controller Hub

MANUAL

Page 1 of 23 version: 1.0

1.2. End limits factory set

2. Special to the Integrated Rechargeable Battery motor

2.1 First Use

When you will rst use your motorized blind with integrated battery we advise to always rst charge your blind. However

when you receive your blind, it is in a so called hibernation status. To wake it up and make it functional you will need to

plug in and pull out a USB type C charging connector into the charging port of your blind. from this point the motor will

start up and become useable in a few seconds.

The top limit is set to the maximum roll-up

position The bottom limit is set to the ordered

product height

MANUAL

Page 2 of 23 version: 1.0

2.2 Charging

When charging your blind, the blind/motor needs to be in an awake state. To wake up the blind please perform the

following:

1. Manual motor Button

2. USB Type-C Charging port

3. LED status indicator

MANUAL

Page 3 of 23 version: 1.0

2.3 LED behaviour and sequences

2.2.1 Insert and extract USB type C charging plug. (like described at 2.1

First use)

2.2.2 Re-insert the USB -Type C connector to start charging.

2.2.3 The motor LED indicator will start blinking RED, signaling the

charging process is activated.

2.2.4 When the LED turns green the integrated battery is fully charged.

constant CHARGE at very low voltage level

MANUAL

Page 4 of 23 version: 1.0

3. Getting started

3.1 Pairing a remote

A PowerView® remote can control up to 6 individual groups of blinds (buttons 1 to 6 at the top of the remote). The

instructions below assign the blind to group 1.

blinking CHARGE (normal)

constant Fully Charged

ashing CHARGE not allowed (temperature to high)

Alternately

CHARGE NTC ERROR (open/short circuit)

3.1 Locate the manual control button on your blind.

3.2 Press and hold the stop button for 6 seconds.

Keep pressing until the remote lights start

blinking

MANUAL

Page 5 of 23 version: 1.0

3.3 Press the group1 button.

IMPORTANT

Watch out to perform steps 2.4 and 2.5 within 3 seconds!



3.4 Press and hold the manual control button .

3.5 Press the open button.

The blind will jog 1x

3.6 Release the manual control button .

MANUAL

Page 6 of 23 version: 1.0

4 Operating the blind

4.1. Selecting a blind

3.7 Press and hold the stop button for 6 seconds.

The remote will exit programming mode

automatically after 20 seconds.

Keep pressing until the remote lights stop

blinking

Select 1 blind only

Select 2 or more blinds

MANUAL

Page 7 of 23 version: 1.0

4.2. Open / close a blind

Select all blinds

A. Select blind group

B. Press open button

MANUAL

Page 8 of 23 version: 1.0

4.3. Move a blind to a favourite position

C. Press close button

A. Select blind group

B. Press favourite button

MANUAL

Page 9 of 23 version: 1.0

5. Set a favourite position

5.1 Select the blind channel

5.2 Use the open , stop and close buttons to

move the blind to the desired favourite position. Use

the arrow up and arrow down buttons to ne-

tune.

5.3 Press and hold the stop button for 6 seconds.

DO NOT select a group on the remote!

Keep pressing until the remote lights start

blinking

IMPORTANT

Watch out to perform steps 4.4 and 4.5 within 3 seconds!



MANUAL

Page 10 of 23 version: 1.0

Table of contents

Other HunterDouglas Window Blind manuals

HunterDouglas

HunterDouglas Vignette Tiered User manual

HunterDouglas

HunterDouglas ZIP 100 Maintenance and service guide

HunterDouglas

HunterDouglas Luminette Privacy Sheers Parts list manual

HunterDouglas

HunterDouglas Duolite Shades Parts list manual

HunterDouglas

HunterDouglas Luminette PowerView Assembly instructions

HunterDouglas

HunterDouglas 5-151 User manual

HunterDouglas

HunterDouglas Cadence Parts list manual

HunterDouglas

HunterDouglas Standard Hardware System Parts list manual

HunterDouglas

HunterDouglas Cadence Soft Vertical Blinds Parts list manual

HunterDouglas

HunterDouglas Vignette Traditional User manual

HunterDouglas

HunterDouglas Silhouette Nantucket PowerView Gen 3... Parts list manual

HunterDouglas

HunterDouglas Sonnette Parts list manual

HunterDouglas

HunterDouglas PowerView Gen 3 User manual

HunterDouglas

HunterDouglas Reveal Parts list manual

HunterDouglas

HunterDouglas Duette User manual

HunterDouglas

HunterDouglas RB 500 User manual

HunterDouglas

HunterDouglas Design Studio Installation manual

HunterDouglas

HunterDouglas DecoFlex WireFree Telis Operating instructions

HunterDouglas

HunterDouglas Remembrance Motorized Shade Technical specifications

HunterDouglas

HunterDouglas Standard Cordlock, Moveable Slat Specialty... User guide

HunterDouglas

HunterDouglas Alustra Woven Textures User manual

HunterDouglas

HunterDouglas Skyline Parts list manual

HunterDouglas

HunterDouglas LiteRise User manual

HunterDouglas

HunterDouglas EverWood User guide

Popular Window Blind manuals by other brands

Jysk

Jysk ROGEN manual

SOMFY

SOMFY 1241752 instructions

Rollos

Rollos S-Nanorollo V2 Assembly and operating instruction

Teptron

Teptron Move user manual

Renson

Renson Outdoor Loggia Manual Installation

Project Source

Project Source CDLF2342W quick start guide

Domondo

Domondo PureNight Mounting guide

rollease acmeda

rollease acmeda Easy Spring Air Assembly and installation manual

IKEA

IKEA KADRILJ manual

Hallis Hudson

Hallis Hudson Rolls Super glide instructions

Benthin

Benthin P1614 quick start guide

MV LINE

MV LINE CLARA 015 Installing instructions

Current

Current E-WAND Installation manual and user's guide

weinor

weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user

Roto

Roto ZAR M R4/R7 Mounting instructions

SOMFY

SOMFY Movelite WT Series instructions

Acmeda

Acmeda RF400 Series instructions

Motura

Motura Pli_353/3 manual