HunterDouglas RB 500 User manual

Sonesse 30 RTS and Sonesse 30 WireFree (li-ion) RTS with

Standard+ and Heavy Duty+ Brackets

Motorized Shade Installation Series

STANDARD+ BRACKETS

STANDARD+ BRACKET HEAVY DUTY+ BRACKET

HEAVY DUTY+ BRACKETS

Las Vegas • Chicago

800.229.5300

HDhospitality.com

1 of 3

OPTIONAL: INTEGRATED LEVELER

ADJUST LEVELER

TOOLS NEEDED

INSTALLING THE BRACKETS

Pencil Level

Measuring

Tape Drill with

bits

Allen Key

(provided with

optional Leveler)

Screwdriver Pliers

Ensure the leveling set screw

opening is pointing downwards

before installing the bracket.

On the Standard+ Bracket, the

orientation can be changed by

loosening the two screws (M3x6)

and turning the leveler 90°. Fix

the screws after turning.

Mount into wood or metal studs or into concrete with concrete anchors. Drywall anchors are not

recommended.

Determine the mounting location.

a) surface/wall b) ceiling c) on frame d) in recess

Measure and mark the bracket locations with a pencil.

Mount brackets with the screws provided.

Pre-drilling is recommended.

Check that the brackets are level and aligned.

Insert the provided Allen key into the set

screw of the leveler.

Adjust skewing by turning the Allen key left

or right to move the shade up or down.

Support the shade with your hand if

necessary.

All adjustments can be made after the shade

has been installed and after the operation has

been tested.

041019

HEAVY DUTY+ BRACKET SCREW COVERS

LOCK THE SHADE

SCREW COVER INSTALLATION

2 of 3

INSTALLING THE SHADE - Do not remove the tape around the shade until it is fully installed

CHECK SHADE

OPERATION

Las Vegas • Chicago

800.229.5300

HDhospitality.com

MOTOR BRACKET IDLE BRACKET

UNLOCKED LOCKED

MOTORS

Sonesse 30 RTS (Plug-In Only)

24V DC

Sonesse 30 WireFree (li-ion) RTS

(Rechargeable Battery)

24V DC

Motor Antenna

Power Cable

Slide the

screw cover

over the

bracket until

it snaps in

place.

Place the motor onto the

motor bracket.

Push the shade against

the motor end and lift

the roller shade up until

the end plug ﬁts into the

center of the idle

bracket.

Rotate the nut on the

idle end clockwise

until it meets the tube.

This locks the shade

into position.

Remove the tape from the shade.

Make sure the shade operates properly. Use separate

wiring information per motor type and programing

instructions from HDhospitality.com

Adjust leveler if applicable.

Sonesse 30 RTS and Sonesse 30 WireFree (li-ion) RTS with

Standard+ and Heavy Duty+ Brackets

Motorized Shade Installation Series

click

Slide the end caps onto

the brackets. Snap the end caps onto the brackets until it clicks into

place. Slide the end cap towards you

to remove from the bracket.

Lift the backside of the endcap away from the bracket,

then slide the end cap towards you.

BRACKET COVER INSTALLATION

3 of 3

BRACKET COVER REMOVAL

SHADE REMOVAL

UNLOCK THE SHADE REMOVE IDLE END

STANDARD+ END CAPS HEAVY DUTY+ END CAPS

Las Vegas • Chicago

800.229.5300

HDhospitality.com

STANDARD+ BRACKET HEAVY DUTY+ BRACKET

Rotate the nut

on the idle end

counterclockwise

to unlock the

shade.

Slide a ﬂat head

screwdriver between

the idle end plug and

bracket and push

towards the motor

end to remove the

plug from the bracket.

REMOVE CLUTCH END

Move the shade

downward and out

of the motor bracket.

DISCONNECT THE MOTOR

Disconnect the power cable from the

electrical source.

Plug-in: Unplug from the outlet

Sonesse 30 RTS and Sonesse 30 WireFree (li-ion) RTS with

Standard+ and Heavy Duty+ Brackets

Motorized Shade Installation Series

Other manuals for RB 500

This manual suits for next models

Other HunterDouglas Window Blind manuals

HunterDouglas

HunterDouglas Alustra Woven Textures ST30 Parts list manual

HunterDouglas

HunterDouglas Alustra Woven Textures User manual

HunterDouglas

HunterDouglas Horizontal Aluminum Blinds Operation manual

HunterDouglas

HunterDouglas 2" Horizontal Aluminum Blinds Parts list manual

HunterDouglas

HunterDouglas Sonnette User manual

HunterDouglas

HunterDouglas Pirouette Parts list manual

HunterDouglas

HunterDouglas RB 500 Safety guide

HunterDouglas

HunterDouglas RB 500 Safety guide

HunterDouglas

HunterDouglas EverWood User guide

HunterDouglas

HunterDouglas Provenance Woven Wood Shades Parts list manual

HunterDouglas

HunterDouglas Sonnette Parts list manual

HunterDouglas

HunterDouglas PowerView Gen 3 User manual

HunterDouglas

HunterDouglas Remembrance Motorized Shade Technical specifications

HunterDouglas

HunterDouglas Standard Cordlock, Moveable Slat Specialty... User guide

HunterDouglas

HunterDouglas Duette Honeycomb Shades User manual

HunterDouglas

HunterDouglas DecoFlex WireFree Telis Operating instructions

HunterDouglas

HunterDouglas Cadence Soft Vertical Blinds Parts list manual

HunterDouglas

HunterDouglas Vignette Tiered User manual

HunterDouglas

HunterDouglas LiteRise Operation manual

HunterDouglas

HunterDouglas Country Woods Operation manual

HunterDouglas

HunterDouglas Silhouette Duolite UltraGlide User manual

HunterDouglas

HunterDouglas Vignette Traditional User manual

HunterDouglas

HunterDouglas Paramount Headrail Systems Parts list manual

HunterDouglas

HunterDouglas 5-156 User manual

Popular Window Blind manuals by other brands

Jysk

Jysk ROGEN manual

SOMFY

SOMFY 1241752 instructions

Rollos

Rollos S-Nanorollo V2 Assembly and operating instruction

Teptron

Teptron Move user manual

Renson

Renson Outdoor Loggia Manual Installation

Project Source

Project Source CDLF2342W quick start guide

Domondo

Domondo PureNight Mounting guide

rollease acmeda

rollease acmeda Easy Spring Air Assembly and installation manual

IKEA

IKEA KADRILJ manual

Hallis Hudson

Hallis Hudson Rolls Super glide instructions

Benthin

Benthin P1614 quick start guide

MV LINE

MV LINE CLARA 015 Installing instructions

Current

Current E-WAND Installation manual and user's guide

weinor

weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user

Roto

Roto ZAR M R4/R7 Mounting instructions

SOMFY

SOMFY Movelite WT Series instructions

Acmeda

Acmeda RF400 Series instructions

Motura

Motura Pli_353/3 manual