HunterDouglas LiteRise User manual

Installation

•

Operation

•

Care

Aluminum Blinds

⁄

" or 1" Standard Cordlock,

1" LiteRise

, and SimpleLift

™

Operating Systems

CONTENTS

their respective owners.

Questions?

Call Hunter Douglas Consumer Support at 1-888-501-8364.

GETTING STARTED

Product View — Décor®and Lightlines®Standard Cordlock, LiteRise®, and SimpleLift™.....1

Product View — Celebrity®Standard Cordlock and SimpleLift.............................................2

Tools and Fasteners Needed ..................................................................................................3

Unpack the Blind.....................................................................................................................3

INSTALLATION

Installation Overview..............................................................................................................4

Mount the Hidden Installation Brackets — Inside or Ceiling Mount....................................5

Mount the Beveled Box Installation Brackets — Inside or Ceiling Mount ...........................7

Mount the Hidden Installation Brackets — Outside Mount..................................................8

Mount the Beveled Box Installation Brackets — Outside Mount .........................................9

Mount the Installation Brackets — End Mount...................................................................13

Install the Blind.....................................................................................................................14

Complete the Installation .....................................................................................................15

OPERATION

Operate the Blind..................................................................................................................17

Troubleshooting ....................................................................................................................19

CARE

Removing the Blind (If Necessary) .......................................................................................21

Cleaning Procedures.............................................................................................................21

CHILD SAFETY

Cord Connector .....................................................................................................................22

Reassembly of Cord Connecter ............................................................................................22

Cord Cleats............................................................................................................................23

WARRANTY............................................................................................................Back Cover

GETTING STARTED

Product View — Décor®and Lightlines®Standard Cordlock,

LiteRise®, and SimpleLift™

Hidden

Installation

Brackets

∕

" Spacer

Block

(Optional)

∕

" Spacer

Block

(Optional)

Extension

Brackets

(Optional)

Hold-Down

Brackets and Pin

(Optional)

End Mount

Bracket

Installation

Bracket

and

Screws

Standard Cordlock

Bracket

Shim

(Optional)

End Mount Applications

LiteRise

SimpleLift

™

SimpleLift

Hold-Down

Brackets

(Optional)

GETTING STARTED

Product View — Celebrity

Standard Cordlock and SimpleLift

™

Hidden

Installation

Brackets

∕

" Spacer

Block

(Optional)

∕

" Spacer

Block

(Optional)

Extension

Brackets

(Optional)

Hold-Down

Brackets and Pin

(Optional)

Bracket

Shim

(Optional)

End Mount

Bracket

Installation

Bracket

and

Screws

End Mount Applications

Beveled

Intermediate

Support

Bracket

(If Required)

Beveled

Box

Installation

Bracket

Beveled Bracket Applications*

Headrail

End Lock

Standard Cordlock

SimpleLift

™

*Beveled box installation brackets and beveled intermediate support brackets

are for commercial applications only.

SimpleLift

Hold-Down

Brackets

(Optional)

GETTING STARTED

Thank you for purchasing Hunter Douglas horizontal blinds. With proper installation,

operation, and care, your new blinds will provide years of beauty andperformance.

Please thoroughly review this instruction booklet and the enclosed packing list before

beginning the installation.

Tools and Fasteners Needed

■ Ballpoint pen

■

⁄

" hex, Flat blade, and Phillips screwdrivers

■ Level (laser level is recommended)

■ Measuring tape and pencil

■ Power drill,

⁄

" drill bits, and

⁄

" hex driver

In addition, you will need fasteners designed to work with your specific mounting surface(s).

■ #6 Hex Head Screws (Provided). Two 1

⁄

" screws are provided per installation bracket.

■ Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws

long enough for a secure attachment.

■ Nuts and Screws (Provided). Extension brackets come with nuts and screws.

■ Self-Tapping Screws (Not Provided). If using extension brackets, use self-tapping

screws for a secure attachment.

Unpack the Blind

■ Remove the blind from the package. Keep the packaging until the blind operates to your

satisfaction.

■ Refer to the packing list and check for all necessary parts.

■ Contents of your hardware package may vary depending upon the options chosen.

Nut

and Screw

(Two Provided with

Each Extension Bracket)

Self-T

apping Screw

(Not Provided)

#6 x 1

∕

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw

for Use with Spacer Blocks

(Not Provided)

INSTALLATION

Installation Overview

■ Your order will include the correct number of installation brackets for your blind width, as

shown in the tables below.

Standard Cordlock System

LiteRise®Operating System

Mounting Types and Window Terminology

If the installation brackets are mounted correctly, the rest of the installation process follows

easily. To prepare for this important first step, review the mounting types and basic window

terminology illustrated below.

■ Refer to the appropriate page below based on your order:

➤ Inside or Ceiling Mount — Page 5

➤ Outside Mount — Page 8

➤ End Mount — Page 13

Outside Mount

Blind mounts

outside window

opening.

Inside Mount

Blind ﬁts within

window opening.

Collectively, the sill and

jambs are called the

“window casement.”

Molding

Head Jamb

Sill

Jamb Jamb

Width

of Blind

Number of

Brackets

Under

60 Sq. Ft.

Number of

Brackets

60 Sq. Ft.

and Over

Up to 60" 2 3

⁄

" – 120" 3 4

Over 120" 4 5

⁄

" Décor®and Lightlines®

1" Décor, Lightlines, and Celebrity®

Width of Blind Number of Brackets

Up to 60" 2

⁄

" – 100" 3

1" Décor

SimpleLift™Operating System

1" Décor and Celebrity

Width of Blind Number of Brackets

Under 60 Sq. Ft.

Number of Brackets

60 Sq. Ft. and Over

Up to 60" 2 3

⁄

" – 120" 3 4

Over 120" 4 5

INSTALLATION

Mount the Hidden Installation Brackets

— Inside or Ceiling Mount (Residential Applications)

Bracket Shims (Optional)

Bracket shims are used to gain clearance for

inside or ceiling mount blinds.

NOTE: Bracket shims may also be used

to level the blind whenever the mounting

surface is uneven.

Attach the Hidden Installation Brackets

■ Mark 2" to 6" from each end of the headrail.

➤ If more than two hidden installation brackets came with your order, space additional

hidden installation bracket(s) evenly between the two outer hidden installation

brackets and mark their location.

IMPORTANT: Do not position any hidden installation bracket where it will be located

directly above a cable tape ladder, cordlock, or wand tilter. Allow 1" space on each side

whenever possible.

■ If the blind is larger than 60 square feet, position an extra hidden installation bracket at

the cordlock end for added support when raising the blind. With Two-On-One Headrail

blinds, position an extra hidden installation bracket near each cordlock.

■ Center the hidden installation brackets on your marks and mark the location of the

screw holes.

➤ The minimum casement depth

for mounting the hidden installation

brackets is

⁄

➤ The minimum casement

depth for a fully recessed

mount is 1

⁄

■ Drill the screw holes

using a

⁄

" drill bit.

Hidden

Installation

Bracket

Shim

2" to 6" 2" to 6"Space EvenlySpace Evenly

Headrail

∕

"Minimum Depth

Hidden Installation

Bracket Attachment

∕

"Depth

Fully Recessed

INSTALLATION

■ Use a level to check that the mounting surface

is level. Shim the hidden installation brackets,

if necessary.

■ Attach the hidden installation brackets using

the screws provided.

IMPORTANT: The front edges of the hidden

installation brackets must align.

Proceed to “Install the Blind” on page 14.

∕

"Minimum Depth

Hidden Installation

Bracket Attachment

∕

"Depth

Fully Recessed

INSTALLATION

Mount the Beveled Box Installation Brackets

— Inside or Ceiling Mount (Commercial Applications)

Bracket Shims (Optional)

Bracket shims are used to gain clearance for

inside or ceiling mount blinds.

NOTE: Bracket shims may also be used

to level the blind whenever the mounting

surface is uneven.

Attach the Beveled Box Installation Brackets

With inside or ceiling mounts, attach the two beveled box installation brackets flush against

the sides of the window casement or to the ceiling. Choose the most appropriate of the

following mounting methods:

■ Side/Top Mount (Inside mount only): Mount the beveled box installation brackets with

one screw through a side hole and one screw through the top hole, as shown below left.

■ Side Mount (Inside mount only): Mount the beveled box installation brackets with two

screws through diagonal side holes.

■ Top Mount (Inside or ceiling mount): Top mount the beveled box installation brackets

with screws through the two top holes, as shown below right.

■ Ceiling mount only: If the beveled box installation brackets are flush with the back wall,

attach them with one screw through a top hole and one screw through a rear hole.

■ Use a

⁄

" drill bit to drill holes for the mounting screws.

■ Attach the beveled box installation brackets using the screws provided.

IMPORTANT: The front edges of the beveled box installation brackets must align.

Beveled

Intermediate

Support

Bracket

Shim

Side/Top

Mount

Top Mount

INSTALLATION

Attach the Beveled Intermediate Support Brackets (If Required)

■ Evenly space the beveled intermediate support bracket(s) between the two beveled box

installation brackets.

➤ Adjust spacing if needed to avoid interference with internal headrail mechanisms.

■ Attach the beveled intermediate support bracket(s) with two screws through diagonal

top holes.

IMPORTANT: The rear of the beveled box installation brackets and beveled intermediate

support bracket(s) must align.

Proceed to “Install the Blind” on page 14.

Mount the Hidden Installation Brackets

— Outside Mount (Residential Applications)

To attach the hidden installation brackets, a flat vertical surface of at least

⁄

" is required for

both

⁄

" and 1" slat sizes.

■ Mark 2" to 6" from each end of the headrail.

➤ If more than two hidden installation brackets came with your order, space additional

hidden installation bracket(s) evenly between the two outer hidden installation

brackets and mark their location.

■ Center the hidden installation brackets on your marks and mark the location of the

screw holes.

CAUTION: The rear of the hidden

installation brackets must be flush

against a flat mounting surface.

Do not mount the hidden installation

brackets on a curved molding.

Beveled

Intermediate Support

Bracket

Beveled Box

Installation Bracket

Beveled Box

Installation Bracket

Space Evenly Space Evenly

2" to 6" 2" to 6"Space EvenlySpace Evenly

Headrail End Marks

Window Opening

∕

"Minimum

Flat Vertical Surface

Other manuals for LiteRise

This manual suits for next models

Table of contents

Other HunterDouglas Window Blind manuals

HunterDouglas

HunterDouglas Silhouette Duolite UltraGlide User manual

HunterDouglas

HunterDouglas Alustra Woven Textures User manual

HunterDouglas

HunterDouglas Luminette Privacy Sheers Parts list manual

HunterDouglas

HunterDouglas PowerView M40T User manual

HunterDouglas

HunterDouglas Silhouette Parts list manual

HunterDouglas

HunterDouglas Duette User manual

HunterDouglas

HunterDouglas 5-257 User manual

HunterDouglas

HunterDouglas RB 500 Safety guide

HunterDouglas

HunterDouglas 2" Horizontal Aluminum Blinds Parts list manual

HunterDouglas

HunterDouglas 5-216 User manual

HunterDouglas

HunterDouglas Skyline Parts list manual

HunterDouglas

HunterDouglas Duette Honeycomb Shades User manual

HunterDouglas

HunterDouglas WOODMATES User manual

HunterDouglas

HunterDouglas Silhouette Halo Duolite Parts list manual

HunterDouglas

HunterDouglas RB 500 Safety guide

HunterDouglas

HunterDouglas 5-156 User manual

HunterDouglas

HunterDouglas Reveal Parts list manual

HunterDouglas

HunterDouglas Remembrance Motorized Shade Technical specifications

HunterDouglas

HunterDouglas Alustra Woven Textures ST30 Parts list manual

HunterDouglas

HunterDouglas LiteRise Parts list manual

HunterDouglas

HunterDouglas VS 100 Guide rail Maintenance and service guide

HunterDouglas

HunterDouglas EverWood User guide

HunterDouglas

HunterDouglas Pirouette PowerView+ Gen 3 Automation Parts list manual

HunterDouglas

HunterDouglas Cadence Soft Vertical Blinds Parts list manual

Popular Window Blind manuals by other brands

Jysk

Jysk ROGEN manual

SOMFY

SOMFY 1241752 instructions

Rollos

Rollos S-Nanorollo V2 Assembly and operating instruction

Teptron

Teptron Move user manual

Renson

Renson Outdoor Loggia Manual Installation

Project Source

Project Source CDLF2342W quick start guide

Domondo

Domondo PureNight Mounting guide

rollease acmeda

rollease acmeda Easy Spring Air Assembly and installation manual

IKEA

IKEA KADRILJ manual

Hallis Hudson

Hallis Hudson Rolls Super glide instructions

Benthin

Benthin P1614 quick start guide

MV LINE

MV LINE CLARA 015 Installing instructions

Current

Current E-WAND Installation manual and user's guide

weinor

weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user

Roto

Roto ZAR M R4/R7 Mounting instructions

SOMFY

SOMFY Movelite WT Series instructions

Acmeda

Acmeda RF400 Series instructions

Motura

Motura Pli_353/3 manual