HunterDouglas EverWood User guide

Installation

•

Operation

•

Care

EverWood

Alternative Wood &

Parkland

Wood Blinds

PowerView

Gen 3 Automation and

SimpleLift

™

with PowerView Gen 3 Automation

Operating Systems

CONTENTS

Questions?

Call Hunter Douglas Consumer Support at (800) 789-0331.

their respective owners.

GETTING STARTED...................................................................................... 1

Product View — PowerView®Gen 3 Automation..........................................1

Product View — SimpleLift™ with PowerView®Gen 3 Automation.............2

Unpack the Blind..............................................................................................3

INSTALLATION ............................................................................................. 4

Installation Overview.......................................................................................4

STEP 1 — Install the Brackets ........................................................................4

Mount the Installation Brackets — Inside or Ceiling Mount .........................5

Mount the Installation Brackets — Outside Mount .......................................7

STEP 2 — Connect the Power Cable, If Applicable......................................10

STEP 3 — Install the Blind............................................................................11

STEP 4 — Connect the Power Source, If Applicable....................................15

Testing the Blind ............................................................................................21

OPERATION................................................................................................. 22

Operate the Blind...........................................................................................22

Operating the PowerView®App and Gen 3 Remote.....................................23

Resetting the Blind (If Necessary).................................................................24

TROUBLESHOOTING ................................................................................. 25

CARE............................................................................................................. 31

Removing the Blind (If Necessary) ................................................................31

Cleaning Procedures......................................................................................31

CHILD SAFETY............................................................................................ 32

DECLARATIONS.......................................................................................... 33

WARRANTY ................................................................................................ 34

GETTING STARTED

Product View — PowerView®Gen 3 Automation

End

Bracket

Hold-Down

Brackets and Pin

(Optional)

Required with 2

∕

" slat size; optional with 2" slat size.

Valance, slats, and bottom rail vary by product.

Intermediate

Bracket

(If Required)

Valance Splice

(If Required)

Valance2

Corner Clips for

Valance Returns

(If Required)

End Bracket

Spacer Block1

Intermediate

Bracket

Spacer Block1

Headrail Bracket Shim

(Optional)

2" or 4"

Extension

Brackets

(Optional)

End Bracket

Spacer Block1

End

Bracket

12V Battery

Wand

Magnetic

Valance Clips2

Transceiver

Assembly

Control

Button

GETTING STARTED

Product View — SimpleLift™ with PowerView®Gen 3 Automation

End

Bracket

Required with 2

∕

" slat size; optional with 2" slat size.

Valance and slats vary by product.

Intermediate

Bracket

(If Required)

Valance Splice

(If Required)

Valance2

Corner Clips for

alance Returns

(If Required)

End Bracket

Spacer Block1

Intermediate

Bracket

Spacer Block1

Headrail Bracket Shim

(Optional)

2" or 4"

Extension

Brackets

(Optional)

End Bracket

Spacer Block

End

Bracket

Power

Cable

12V Battery

Wand

Magnetic

Valance Clips2

Transceiver

Assembly

Control

Button

SimpleLift

™

Hold-Down

Brackets

(Optional)

GETTING STARTED

Thank you for purchasing Hunter Douglas horizontal blinds. With proper installation,

operation, and care, your new blinds will provide years of beauty and performance.

Please thoroughly review this instruction booklet and the enclosed packing list before

beginning the installation.

Tools and Fasteners Needed

■ Ballpoint pen

■

⁄

" hex and flathead screwdrivers

■ Level (laser level is recommended)

■ Measuring tape and pencil

■ Power drill,

⁄

" drill bit, and

⁄

" hex driver

In addition, you will need fasteners designed to work with your specific mounting surface(s).

■ #6 Hex Head Screws (Provided). Two 1

⁄

" screws are provided per installation bracket.

■ Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws

long enough for a secure attachment.

■ Nuts and Screws (Provided). Extension brackets come with screws and nuts.

■ Wire Retainers (Not Provided). If using 18V DC Power Supply, satellite battery mount or

rechargeable battery wand, wire retainers are recommended to secure the power cable.

Unpack the Blind

■ Remove the blind from the package. Keep the packaging until the blind operates to your

satisfaction.

■ Refer to the packing list and check for all necessary parts.

■ Contents of your hardware package may vary depending upon the options chosen.

■ Do not remove the slat protector tape (if applied). Doing so will damage the slat finish.

Nut

and Screw

(Two Provided with

Each Extension Bracket)

Wire Retainers

(Not Provided)

#6 x 1

∕

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw

for Use with Spacer Blocks

(Not Provided)

INSTALLATION

Installation Overview

To install your blind, you will need to perform the following four steps:

STEP 1: Install the Brackets

STEP 2: Connect the Power Cable

STEP 3: Install the Blind

STEP 4: Connect the Power Source, If Applicable

STEP 1 — Install the Brackets

■ Two end brackets are used to mount horizontal blinds. Wider blinds also require one or

two intermediate brackets, as shown in the tables below.

Mounting Types and Window Terminology

If the installation brackets are mounted correctly, the rest of the installation process follows

easily. To prepare for this important first step, review the mounting types and basic window

terminology illustrated below.

■ Refer to the appropriate page below based on your order:

➤ Inside or Ceiling Mount — Page 5

➤ Outside Mount — Page 7

Width of Blind Intermediate Brackets

Up to 48" 0

⁄

" – 60" 1

⁄

" – 96" 2

Outside Mount

Blind mounts

outside window

opening.

Inside Mount

Blind ﬁts within

window opening.

Collectively, the sill and

jambs are called the

“window casement.”

Molding

Head Jamb

Sill

Jamb Jamb

INSTALLATION

Mount the Installation Brackets — Inside or Ceiling Mount

Headrail Bracket Shims (Optional)

Headrail bracket shims are used to gain clearance for valance clips with inside or ceiling

mounts. One shim for each end bracket and two shims for each intermediate

bracket are included.

■ With each end bracket, first fold the shim and then position it on top of the end bracket to

gain the required clearance.

■ With each intermediate bracket, stack two

unfolded shims.

NOTE: Headrail bracket shims may also be

used to level the blind whenever the mounting

surface is uneven. The shims can be cut along

their fold line to make them fit.

Attach the End Brackets

With inside or ceiling mounts, attach the two end brackets flush against the sides of the

window casement or to the ceiling. Choose the most appropriate of the following mounting

methods:

■ Side/Top Mount (Inside mount only): Mount the end brackets with one screw through

a side hole and one screw through a top hole, as shown below left.

■ Side Mount (Inside mount only): Mount the end brackets with two screws through

diagonal side holes.

■ Top Mount (Inside or ceiling mount): Top mount the end brackets with screws through

the two top holes, as shown below right.

■ Ceiling mount only: If the end brackets are flush with the back wall, attach them with

one screw through a top hole and one screw through a rear hole.

■ Mark each required screw hole.

Single

Shim

Intermediate

Bracket

Side/Top

Mount

Top Mount

INSTALLATION

IMPORTANT: The front edges of the end brackets must align.

■ Use a

⁄

" drill bit to drill holes for the mounting screws.

■ Attach the end brackets using the screws provided.

NOTE: For blinds with 2

⁄

" slats, spacer blocks are used with inside mounts to position

the end brackets a minimum of

⁄

" away from the glass. The spacing prevents the slats

from rubbing the glass when they are tilted open.

Attach the Intermediate Brackets (If Required)

■ Evenly space the intermediate bracket(s) between the two end brackets.

➤ Adjust spacing if needed to avoid interference with internal headrail mechanisms.

■ Attach the intermediate bracket(s) with two screws through diagonal top holes.

IMPORTANT: The rear of the end brackets and intermediate bracket(s) must align.

Proceed to “STEP 2 — Connect the Power Cable, If Applicable” on page 10.

Intermediate

Bracket

End

Bracket

End

Bracket

Space Evenly Space Evenly

INSTALLATION

Mount the Installation Brackets — Outside Mount

To attach the end brackets, a flat vertical surface of at least 1

⁄

" is required.

Mark the End Bracket Locations

■ Mark where the ends of the headrail will be located.

➤ Center the headrail over the window opening at the desired height.

Use a pencil to lightly mark each end of the headrail.

➤ Alternatively, measure the width of the headrail and use that

width to mark the headrail end points over the window opening.

■ Make a second mark

⁄

" to the outside of the headrail

end marks. The outer marks are where the outside

edges of the end brackets will be located.

Attach the End Brackets

NOTE: The illustrations in this section show spacer blocks mounted with the end brackets.

Spacer blocks are required for all outside mount 2

⁄

" blinds, unless extension brackets are

used. Spacer blocks are optional for 2" slat size.

■ Align the outside edge of each end bracket with the outer marks.

■ Mark diagonal screw holes.

■ Use a

⁄

" drill bit to drill holes for the mounting screws.

Mark

Measure and Mark

∕

" Out from

Ends of Headrail

Mark

INSTALLATION

■ Attach the end brackets using two screws

through diagonal holes.

➤ If using spacer blocks, use #6 screws

long enough for a secure installation

⁄

" long screw is recommended).

IMPORTANT: The tops of the end

brackets must align.

CAUTION: The rear of the end

brackets or spacer blocks must be flush

against a flat mounting surface. Do not

mount end brackets on acurved

molding.

Attach the Intermediate Brackets (If Required)

■ Evenly space the intermediate bracket(s) between the two end brackets.

➤ Adjust spacing if needed to avoid interference with internal headrail mechanisms.

■ Attach the intermediate bracket(s) with

two screws through diagonal holes.

IMPORTANT: The tops of the end brackets

and intermediate bracket(s) must align.

Intermediate

Bracket

End

Bracket

End

Bracket

Space Evenly Space Evenly

This manual suits for next models

Table of contents

Other HunterDouglas Window Blind manuals

HunterDouglas

HunterDouglas Reveal with MagnaView Operation manual

HunterDouglas

HunterDouglas Skyline Parts list manual

HunterDouglas

HunterDouglas Duolite Shades Parts list manual

HunterDouglas

HunterDouglas RB 500 User manual

HunterDouglas

HunterDouglas RB 500 Safety guide

HunterDouglas

HunterDouglas Luminette Privacy Sheers Parts list manual

HunterDouglas

HunterDouglas Silhouette Parts list manual

HunterDouglas

HunterDouglas Duette Parts list manual

HunterDouglas

HunterDouglas Palmetto Horizontal Shadings Manual

HunterDouglas

HunterDouglas Vignette Modern Roman Shades Parts list manual

HunterDouglas

HunterDouglas LiteRise Parts list manual

HunterDouglas

HunterDouglas Paramount Owner's manual

HunterDouglas

HunterDouglas 5-257 User manual

HunterDouglas

HunterDouglas Cadence Parts list manual

HunterDouglas

HunterDouglas Reveal Parts list manual

HunterDouglas

HunterDouglas Silhouette A Deux Parts list manual

HunterDouglas

HunterDouglas PowerView Parts list manual

HunterDouglas

HunterDouglas LiteRise Operation manual

HunterDouglas

HunterDouglas 5-216 User manual

HunterDouglas

HunterDouglas Pirouette Parts list manual

HunterDouglas

HunterDouglas Luxaflex PowerView User manual

HunterDouglas

HunterDouglas 5-151 User manual

HunterDouglas

HunterDouglas WOODMATES User manual

HunterDouglas

HunterDouglas Silhouette Duolite UltraGlide User manual

Popular Window Blind manuals by other brands

Jysk

Jysk ROGEN manual

SOMFY

SOMFY 1241752 instructions

Rollos

Rollos S-Nanorollo V2 Assembly and operating instruction

Teptron

Teptron Move user manual

Renson

Renson Outdoor Loggia Manual Installation

Project Source

Project Source CDLF2342W quick start guide

Domondo

Domondo PureNight Mounting guide

rollease acmeda

rollease acmeda Easy Spring Air Assembly and installation manual

IKEA

IKEA KADRILJ manual

Hallis Hudson

Hallis Hudson Rolls Super glide instructions

Benthin

Benthin P1614 quick start guide

MV LINE

MV LINE CLARA 015 Installing instructions

Current

Current E-WAND Installation manual and user's guide

weinor

weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user

Roto

Roto ZAR M R4/R7 Mounting instructions

SOMFY

SOMFY Movelite WT Series instructions

Acmeda

Acmeda RF400 Series instructions

Motura

Motura Pli_353/3 manual