Honeywell EK205 User manual

Quick Reference Guide

Volume conversion device

EK205

2 Quick Reference Guide

Contents

1About this Quick Guide.................................................................................................3

2Display and Operation...................................................................................................3

3Display Tabs and Data Displayed.................................................................................5

Volume Conversion Device EK205

Operating instructions:

73024092

Version:

Issue date:

03.03.2017

Software version:

from 1.02

Website:

www.elster-instromet.com

Quick Reference Guide 3

1 About this Quick Guide

This quick guide gives you an overview about the navigation and all of the displays available

in the Flow Converter EK205. It provides short descriptions of the values displayed in most

of the customer displays and aims to serve as a quick reference guide.

This reference is only a complement of the operating manual of the EK205. Refer to the

operating manual which specifies all of the safety and handling instructions that apply for the

device's area of application.

2 Display and Operation

Operating controls

As an operating element of the EK205, an alphanumerical display and a keyboard on the

front side of the device are available.

Fig. 1: Front plate of the EK205

Alphanumerical display

2Arrow key◄

3Arrow key▲

4Arrow key▼

5Arrow key►

6HOME/CLR key combination

7ENTER key combination

8ESC key combination

The alphanumerical display

The display is devided in the following sections and control elements:

Fig 2: Structure of the display

data field

each tab displays context specific data like

hyperlinks, counters, measurements,

messages etc.

2current cursor position

status bar informs about the

current state of the device and the

battery level

4active tab (

≙

selected display)

5inactive tab (

≙

optional displays)

4 5

4 Quick Reference Guide

Functions of the keys

The keys have the following functions:

Key Function

jump to the right to another data list

jump to the second part of a value displayed in two parts

open the relevant submenu

jump down within a data list

jump to the left to another data list

leave a submenu and jump to its start value (one menu level higher)

jump up within a data list

+ By pressing the two keys at the same time, you can execute the ENTER

function regardless of the relevant data class and thereby...

activate the input mode.

open the relevant submenu.

update the relevant measurement value.

+ By pressing the two keys at the same time, you can execute the ESC

function regardless of the relevant data class and thereby...

leave a submenu and jump to its start value (one menu level higher).

cancel an input (the input mode).

+ By pressing the two keys at the same time, you can execute the HOME/CLR

function and thereby

display the Main tab.

initiate a value in the input mode (reset to its start value).

+ By pressing the two keys at the same time, via the context menu

displayed, you can...

display the Main tab.

freeze the current display.

delete the status tab.

+ Display address of the current value.

The Status bar and its symbols

The status bar is displayed in the first row.

Fig. 3: Status bar

Quick Reference Guide 5

The symbols have the following meaning:

Symbol Meaning

At the top left edge of the display, individual letters are displayed as symbols

for the following messages:

ok. no special messages

A alarm – collective message "any alarm"

p pressure alarm – The gas pressure cannot be measured.

T temperature alarm – the gas temperature cannot be measured

W warning – collective message "any warning"

B battery warning – The battery is nearly empty.

L1certification data log – The certification data log is full.

P calibration lock (programming mode) – The calibration lock is open.

o online – data transmission is ongoing

If one of these letters flashes, the condition thereby indicated is still in place (active). If a

letter is displayed consistently, the indicated status is no longer in place, but needs to be

confirmed.

Frz. display frozen

The values displayed are "frozen" (not up to date). To display the current

values press any key. You trigger the freezing function by pressing the +

key combination.

external power supply

If this symbol appears, the EK205 is being supplied power from an external

unit connected to the terminals.

signal strength of the radio network for the external modem (connected to

the terminals) – only displayed if an external modem is connected and active

charging status of the device battery

3 Display Tabs and Data Displayed

Overview about the Tabs: Main, Cust. Admin, Serv. Crtl.

The display is divided into the following five tabs, whereby Admin and Serv. mainly share

the same submenus:

1If a calibration logbook is available in the device.

6 Quick Reference Guide

Fig 4: Display tabs with submenus

Tabs “Main”, “Cust.” and “Ctrl.” – in Detail

Main Cust. Ctrl.

Vb volume at base

conditions

Time date and time St.AL administrator lock:

status/close

VmT total volume at

measurement

conditions

Vb volume at base conditions Cod.A enter/change

administrator key

p pressure VmT total volume at

measurement conditions

St.PL calibration lock:

Status/close

T temperature p pressure Menu selection of the display

T temperature Main content of the Main tab

K compressibility ratio factor

C conversion factor

SReg status register (total)

VbMP

↑

maximum measurement

period counter Vb in the

current month

VbDy

↑

maximum daily counter Vb

in the current month

Qb flow rate at base conditions

Qm flow rate at measurement

conditions (actual)

Quick Reference Guide 7

Tab “Admin” – Overview

Fig 5: Admin tab with submenus 2

2The highlighted displays are described in the section Tab Admin – in Detail of this quick guide, all other displays in the EK205 operating manual.

8 Quick Reference Guide

Tab Admin – in Detail

In the following tables only the displays and submenus are described in detail which are

highlighted in figure 5. The tabs Admin and Serv. only vary in some submenus.

Admin ...

Admin – User values

Time curr. date and time

total volume...

VbT ... at base conditions

VmT ... at measurement conditions

p pressure

T temperature

K compressibility ratio factor

C conversion factor

VbMPmaximum measurement period counter Vb in the current month

VbDymaximum daily counter Vb in the current month

Admin – Volume

Standard volume



submenu

Admin – Volume – Standard volume

volume at base conditions...

Vb ... undisturbed

VbD ... disturbed

VbT ... total (disturbed + undisturbed)

VbA ... adjustable (disturbed + undisturbed)

Qb flow rate at base conditions

VbLW lower warning limit Vb

VbUW upper warning limit Vb

ScMVb source for monitoring Vb

MdMVb mode monitoring Vb

Synchroniza-

tion Vb



submenu

... – Volume – Standard volume – Synchronization Vb

VbA adjustable volume at base conditions

Vb volume at base conditions

Store adopt values

Time current date and time

TimeX time stamp of the alignment

volume at measurement conditions...

Vb_o ... old value

Vb_n ... new value

Clear reset volume within base conditions

Quick Reference Guide 9

Admin ...

Actual volume



submenu

Admin – Volume – Actual volume

volume at measurement conditions...

Vm ... undisturbed

VmD ... disturbed

VmT ... total (disturbed + undisturbed)

VmA ... adjustable (disturbed + undisturbed)

Qm flow rate at measurement conditions

VmLW lower warning limit Vm

VmUW upper warning limit Vm

ScMVm source for monitoring Vm

MdMVm mode monitoring Vm

Md.I1 mode for input 1

cp.I1 pulse constant for input 1

Synchroniza-

tion Vm



submenu

... – Volume – Actual volume – Synchronization Vm

VmA adjustable volume at measurement conditions

Vm volume at measurement conditions

Store adopt values

Time current date and time

TimeX time stamp of the alignment

volume at measurement conditions...

Vm_o ... old value

Vm_n ... new value

Clear reset volume within measurement conditions

Admin – Volume conversion

C conversion factor

K compressibility ratio factor

z compressibility factor

Zb compressibility factor at base conditions

p pressure

T temperature

flow rate ...

Qm ... at measurement conditions

Qb ... at base conditions

per measuring

period



submenu

Admin – Volume conversion – per measuring period

K.MPcØ mean value K of current meas. period

K.MPØ mean value K of last meas. period

C.MPcØ mean value C of current meas. period

10 Quick Reference Guide

Admin ...

C.MPØ mean value C of last meas. period

Mper measurement period

per day



submenu

Admin – Volume conversion – per day

K.DycØ mean value K of current day

K.DyØ mean value K of last day

C.DycØ mean value C of current day

C.DyØ mean value C of last day

DayB day boundary

Parameter

settings



submenu

Admin – Volume conversion – Parameter settings

Md.K compressibility calculation method:

<fixed value | S-GERG-88 | AGA-NX19 | AGA-8 GC1 | AGA-8 GC1,

AGA-NX19-HW | AGA-8 DC92>

K.F inverted compressibility ratio factor, substitute value

pbX pressure at base conditions for gas analysis input

TbX temperature at base conditions for gas analysis input

Ho.b calorific value

CO2 carbon dioxide

H2 hydrogen

Rhob density at base conditions

Admin – Measured values

Pressure



submenu

Admin – Measured values – Pressure

p pressure

pressure ...

p.Mes ... measurement

p.Abs ... absolute measurement

pMin ... lower alarm limit

pMax ... upper alarm limit

p.LW ... lower warning limit

p.UW ... upper warning limit

Md.p ... mode

p.F ... substitute value

p.atm ambient pressure (constant)

pb pressure at base conditions

SNp serial number of pressure sensor

Typ.p type of pressure sensor

pressure measurement range ...

MRL.p ... lower limit

Table of contents

Other Honeywell Measuring Instrument manuals

Honeywell

Honeywell 3400 User manual

Honeywell

Honeywell QX Series User manual

Honeywell

Honeywell 7866 User manual

Honeywell

Honeywell Chadwick-Helmuth 8500C User manual

Honeywell

Honeywell Vertex User manual

Honeywell

Honeywell Vertex Edge User manual

Honeywell

Honeywell 04973 Series Manual

Honeywell

Honeywell AUTOCUBE 8200 User manual

Honeywell

Honeywell SC Series User manual

Honeywell

Honeywell FS24X Plus User manual

Honeywell

Honeywell HERMetic UTImeter Gtex Chem IIC Operation manual

Honeywell

Honeywell 6108 How to use

Honeywell

Honeywell W8710A User manual

Honeywell

Honeywell APT4000PH User manual

Honeywell

Honeywell Enraf 854 ATG User manual

Honeywell

Honeywell MicroMAX Pro Operating instructions

Honeywell

Honeywell AD1200-CT User manual

Honeywell

Honeywell FE260 User manual

Honeywell

Honeywell OELD User manual

Honeywell

Honeywell CM4 User manual

Honeywell

Honeywell C7355A1050 User manual

Honeywell

Honeywell FlexLine SmartServo 954 User manual

Honeywell

Honeywell NOTIFIER UDS-3 Wiring diagram

Honeywell

Honeywell HomMed Genesis Touch User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual