Hirschmann RSR20-0900 User manual

Installation RSR20/RSR30

Release

10/2015

Technical Support

https://hirschmann-support.belden.eu.com

User Manual

Installation

Industrial Ethernet Rail Switch Rugged

RSR20/RSR30 Family

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. The end user license on the provided CD/DVD is effective for devices with

embedded software.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This publication was created by Hirschmann Automation and

Control GmbH to the best of its knowledge. Hirschmann reserves the right to change the content

of this publication at any time without notice. Hirschmann does not give any warranty or

assurance with respect to the correctness or accuracy of the details in this publication.

Hirschmann accepts no liability for damage in any way related to the use of the network

components or their operating system software. In addition, we refer to the conditions of use

specified in the license contract.

You find the latest version of this manual on the internet at Hirschmann product pages

(www.hirschmann.com).

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

RSR20/RSR30 039698-002-04-1015

Installation RSR20/RSR30

Release

10/2015 3

Content

Safety Information 5

About this manual 14

Key 15

1 Description 16

1.1 General description of the device 16

1.2 Description of the device variants 17

1.2.1 Combination options RSR20/RSR30 17

1.2.2 Port number and media for RSR20-... 20

1.2.3 Port number and media for RSR30-... 25

1.3 Power supply 32

1.3.1 Supply voltage with the characteristic value K 32

1.3.2 Supply voltage with the characteristic value C 32

1.4 Ethernet ports 32

1.4.1 10/100/1000 Mbit/s twisted pair port 32

1.4.2 10/100 Mbit/s twisted pair port 33

1.4.3 100/1000 Mbit/s F/O port 33

1.4.4 1000 Mbit/s F/O port 33

1.4.5 100 Mbit/s F/O port 34

1.4.6 Gigabit combo port 34

1.4.7 Pin assignments 35

1.5 Display elements 36

1.5.1 Device status 36

1.5.2 Port status 38

1.6 Management interfaces 39

1.6.1 USB interface 39

1.6.2 V.24 interface (external management) 39

1.7 Signal contacts 40

2 Installation 41

2.1 Checking the package contents 41

2.2 Installing and grounding the device 41

2.2.1 Snapping a unit onto the DIN rail 42

2.2.2 Mounting on a vertical flat surface 43

2.2.3 Grounding 44

2.3 Installing an SFP transceiver (optional) 44

2.4 Connecting the terminal block 44

4Installation RSR20/RSR30

Release

10/2015

2.4.1 Supply voltage 46

2.4.2 Supply voltage with the characteristic value K 46

2.4.3 Supply voltage with the characteristic value C 47

2.4.4 Signal contact 48

2.5 Mounting a terminal block 48

2.6 Operating the device 48

2.7 Connecting data cables 49

2.8 Insert data in label area 49

3 Making basic settings 50

4 Monitoring the ambient air temperature 51

5 Maintenance and service 52

6Disassembly 53

6.1 Removing the device 53

6.2 Removing an SFP transceiver (optional) 53

7 Technical Data 54

A Further support 65

Installation RSR20/RSR30

Release

10/2015 5

Safety Information

General safety instructions

You operate this device with electricity. Improper usage of the device

entails the risk of physical injury or significant property damage. The

proper and safe operation of this device depends on proper handling

during transportation, proper storage and installation, and careful

operation and maintenance.

Before connecting any cable, read this document, and the safety

instructions and warnings.

Operate the device with undamaged components exclusively.

The device is free of any service components. In case of a damaged

or malfunctioning device, turn off the supply voltage and return the

device to Hirschmann for inspection.

Intended usage

Use the product only for the application cases described in the

Hirschmann product information, including this manual.

Operate the product only according to the technical specifications.

See “General technical data” on page 54.

Connect to the product only components suitable for the requirements

of the specific application case.

Installation site requirements

Install the device in a fire enclosure according to EN 60950-1.

Install this device only in a switch cabinet or in a restricted access

location, to which maintenance staff have exclusive access.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

6Installation RSR20/RSR30

Release

10/2015

Device casing

Only technicians authorized by the manufacturer are permitted to open

the casing.

Never insert pointed objects (narrow screwdrivers, wires, etc.) into the

device or into the connection terminals for electric conductors. Do not

touch the connection terminals.

Keep the ventilation slits free to ensure good air circulation.

See “General technical data” on page 54.

Install the device in the vertical position.

At ambient temperatures > 60 °C:

The surfaces of the device casing may become hot. Avoid touching the

device while it is operating.

Qualification requirements for personnel

Allow qualified personnel exclusively to perform any work on the

device.

Qualified personnel are characterized by the following points:

The qualified personnel has received an appropriate training. Proper

training as well as a practical knowledge and experience constitute the

qualification. This qualification is the requirement to connect, to ground

and to label power circuits, devices, and systems in accordance with

current safety engineering standards.

The qualified personnel are aware of the hazards associated with their

tasks.

The qualified personnel know proper measures against such hazards

to minimize the risk for themselves and others.

The qualified personnel participate in regular training.

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

Grounding

The device is grounded by the separate ground screw on the front panel.

Use a wire diameter for the ground conductor that is no smaller than

the diameter of the supply voltage connection, however of at least

0.75 mm² (AWG18).

Ground the device before connecting any other cables.

Disconnect the grounding only after disconnecting all other cables.

Shielding ground

The overall shield of a connected shielded twisted pair cable is connected

to the ground connector on the front panel as a conductor.

Beware of possible short circuits when connecting a cable section with

conductive shielding braiding.

Installation RSR20/RSR30

Release

10/2015 7

Supply voltage

The supply voltage is electrically isolated from the housing.

The devices are designed for operation with safety extra-low voltage.

Connect only safety extra-low voltage circuits with voltage restrictions

in line with IEC/EN 60950-1 to the supply voltage connections and

signal contacts.

Connect only a supply voltage that corresponds to the type plate of

your device.

Ground the device before connecting any other cables.

Only for device variants featuring supply voltage with the characteristic

value K:

Before connecting the electrical wires, always verify that all the

following requirements are met:

The power supply conforms to overvoltage category I or II.

The voltage supply has an easily accessible disconnecting device

(e.g. a switch or a plug). This disconnecting device is clearly

identified. So in the case of an emergency, it is clear which

disconnecting device belongs to which power supply cable.

The electrical wires are voltage-free.

Supply with AC voltage:

A fuse is located in the outer conductor of the power supply.

The neutral conductor is on ground potential at both voltage inputs.

Otherwise, a fuse is also located in the neutral conductor.

Regarding the properties of this fuse: See “General technical data”

on page 54.

Supply with DC voltage:

A fuse suitable for DC voltage is located in the plus conductor of the

power supply.

The minus conductor is on ground potential. Otherwise, a fuse is

also located in the minus conductor.

Regarding the properties of this fuse: See “General technical data”

on page 54.

The wire diameter of the power supply cable is at least 0.75 mm²

(North America: AWG18) on the supply voltage input.

The cross-section of the protective conductor is the same size as

or bigger than the cross-section of the power supply cables.

The cables used are permitted for the temperature range of the

application case.

Relevant for North America:

The power supply cables are suitable for ambient air temperatures

of at least 167 °F (75 °C). The wires of the power supply cables are

made of copper.

Start connecting the electrical wires only if all the above safety

requirements are fulfilled.

8Installation RSR20/RSR30

Release

10/2015

Only for device variants featuring supply voltage with the characteristic

value C:

The power supply is Class 2 compliant.

The power supply conforms to overvoltage category I or II.

The voltage supply has an easily accessible disconnecting device

(e.g. a switch or a plug). This disconnecting device is clearly

identified. So in the case of an emergency, it is clear which

disconnecting device belongs to which power supply cable.

The electrical wires are voltage-free.

A fuse suitable for DC voltage is located in the plus conductor of the

power supply.

The minus conductor is on ground potential. Otherwise, a fuse is

also located in the minus conductor.

Regarding the properties of this fuse: See “General technical data”

on page 54.

The wire diameter of the power supply cable is at least 0.75 mm²

(North America: AWG18) on the supply voltage input.

The cables used are permitted for the temperature range of the

application case.

Relevant for North America:

The power supply cables are suitable for ambient air temperatures

of at least 167 °F (75 °C). The wires of the power supply cables are

made of copper.

Start connecting the electrical wires only if all the above safety

requirements are fulfilled.

Internal fuses are only triggered if there is a fault in the device. In case

of damage or malfunction of the device, turn off the supply voltage and

return the device to the plant for inspection.

For supply voltage connections with protective conductor connection:

First connect the protective conductor before connecting the wires for

the supply voltage.

If your device comprises a 2nd supply voltage connection of this type:

First connect the protective conductor before connecting the wires for

the supply voltages.

Enable the supply voltage for the device only when the following

requirements are fulfilled:

the housing is closed

the terminal blocks are wired correctly

the terminal blocks for the power supply are connected

Installation RSR20/RSR30

Release

10/2015 9

Relevant for use in explosion hazard areas (Hazardous

Locations, Class I, Division 2):

SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D

HAZARDOUS LOCATIONS, OR IN NON-HAZARDOUS LOCATIONS

ONLY.

Substitution of any components may impair suitability for Class I,

Division 2.

The USB connector is for temporary connection only. Do not use,

connect or disconnect unless the area is known to be non-hazardous.

Connection or disconnection in an explosive atmosphere could result in

an explosion.

Do not disconnect equipment unless power has been turned off or the

area is known to be free of ignitable concentrations.

Avertissement - Risque d'explosion - Ne pas débrancher tant que le

circuit est sous tension à moins que l'emplacement soit connu pour ne

contenir aucune concentration de gaz inflammable.

Avertissement - Risque d'explosion - La substitution de tout composant

peut rendre ce matériel incompatible pour une utilisation en classe I,

division 2.

10 Installation RSR20/RSR30

Release

10/2015

Title: Control Drawing for RSR20 / RSR30 family

Date: 2010-01-20 Document No.: 000144941DNR Rev.

1.1

Page 1 of 2

Fault

IP54 enclosure

HAZARDOUS LOCATION

Non

Hazardous

Location

RSRxx

Non-Hazardous LocationHazardous Location

Power supply (redundant)

Type “K”: 110–230 V AC or 60–250 V DC

Type “C”: 24–48 V DC

(protective earthing conductors Type “K” only)

Fault contacts. Equipment with nonincendive eld wiring parameters:

V < 30 V I < 90 mA Li< 0.5 ȝH Ci< 20 pF

Data communication Ethernet Ports

ACA21 USB AutoConguration Adapter

For Maintenance only – See Installation Instructions

V.24 Interface (External Management)

This manual suits for next models

Table of contents

Other Hirschmann Network Router manuals

Hirschmann

Hirschmann MICE MS20 User manual

Hirschmann

Hirschmann MACH 1020 User manual

Hirschmann

Hirschmann MICE MS20-1600 Series User manual

Hirschmann

Hirschmann MACH 4002 Family User manual

Hirschmann

Hirschmann MACH 1020 User manual

Hirschmann

Hirschmann OWL 4G Europe User manual

Hirschmann

Hirschmann GECKO 4TX User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann OCTOPUS OS3 User manual

Hirschmann

Hirschmann OWL LTE M12 User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann MM2-2FXM3/2TX1 Manual

Hirschmann

Hirschmann RS2-FX-LH/FX-LH Manual

Hirschmann

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User manual

Hirschmann

Hirschmann MACH 1020 User manual

Hirschmann

Hirschmann Power MICE User manual

Hirschmann

Hirschmann SPIDER Premium Line User manual

Hirschmann

Hirschmann MACH104-20TX-F Series User manual

Hirschmann

Hirschmann MICE MS20-0800 Series User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann HiSecOS EAGLE20 User manual

Hirschmann

Hirschmann MACH104-20TX-FR Series User manual

Hirschmann

Hirschmann OWL3G User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview