Hirschmann GECKO 4TX User manual

Installation GECKO

Release

07/2014

Technical support

https://hirschmann-support.belden.eu.com

User Manual

Installation

Lite Managed Switch

GECKO 4TX

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Installation GECKO 14.7.14

Installation GECKO

Release

07/2014 3

Contents

Safety instructions 5

About this Manual 10

Legend 10

1 Description 11

1.1 General description 11

1.2 Device view 13

1.3 Power supply 13

1.4 Ethernet ports 14

1.4.1 10/100 Mbit/s twisted pair port 14

1.5 Display elements 14

1.5.1 Device state 15

1.5.2 Port state 15

2 Installation 16

2.1 Checking the package contents 16

2.2 Installing the device onto the DIN rail 16

2.3 Wiring the terminal block for the working voltage and

grounding 17

2.4 Operating the device 18

2.5 Connecting data cables 19

3 Configuration 20

4 Monitoring the ambient air temperature 21

5 Maintenance and service 22

6 Disassembly 23

7 Technical data 24

A Further Support 29

4Installation GECKO

Release

07/2014

Installation GECKO

Release

07/2014 5

Safety instructions

General safety instructions

You operate this device with electricity. The proper and safe operation of

this device depends on proper handling during transportation, proper

storage and assembly, and conscientious operation and maintenance

procedures. Improper use of this device is associated with the risk of

personal injury or property damage.

Read this documentation as well as the safety instructions and

warnings before connecting any cables.

Never start operation with damaged components.

The device does not contain any service components. If the device is

not functioning correctly, or if it is damaged, turn off the power supply

and return the device to Hirschmann for inspection.

Qualification requirements for personnel

Only allow qualified personnel to work on the device.

Qualified personnel have the following characteristics:

Qualified personnel are properly trained. Training as well as practical

knowledge and experience make up their qualifications. This is the

prerequisite for grounding and labeling circuits, devices, and systems

in accordance with current standards in safety technology.

Qualified personnel are aware of the dangers that exist in their work.

Qualified personnel are familiar with appropriate measures against

these hazards in order to reduce the risk for themselves and others.

Qualified personnel receive training on a regular basis.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

6Installation GECKO

Release

07/2014

Intended usage

Use the product only for the application cases described in the

Hirschmann product information, including this manual.

Operate the product only according to the technical specifications.

See “Technical data” on page 24.

Connect to the product only components suitable for the requirements

of the specific application case.

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

Grounding the device

The device is grounded by means of a 3-pin terminal block.

Ground the device before connecting any other cables.

Disconnect the grounding only after disconnecting all other cables.

Working voltage

Connect only a working voltage that corresponds to the type plate of

your device.

Every time you connect the electrical conductors, make sure that the

following requirements are met:

The power supply conforms to overvoltage category I or II.

The power supply has an easily accessible disconnecting device

(e.g., a switch or a plug). This disconnecting device is clearly

identified. So in the case of an emergency, it is clear which

disconnecting device belongs to which power supply cable.

The electrical wires are voltage-free.

The power supply is Class 2 compliant.

Alternatively, a fuse suitable for DC voltage is located in the plus

conductor of the power supply.

The minus conductor is on ground potential. Otherwise, a fuse is

also located in the minus conductor.

Regarding the properties of this fuse: See “General technical data”

on page 24.

The working voltage inputs are designed for operation with safety

extra-low voltage. Connect only SELV circuits with voltage

restrictions in line with IEC/EN 60950-1 to the working voltage

connections.

The wire diameter of the power supply cable is at least 1 mm²

(North America: AWG16) on the working voltage input.

The wire diameter of the ground conductor is at least 1 mm² (North

America: AWG16).

Installation GECKO

Release

07/2014 7

The power supply cables used are permitted for the temperature

range required by the application case.

The power cords are suitable for ambient air temperatures of at

least 167 °F (75 °C). The power cord wires are made of copper.

Internal fuses are triggered solely in the case of a detected error in the

device. In case of damage or malfunction of the device, turn off the

working voltage and return the device to the plant for inspection.

Only switch on the operating voltage for the device when the following

requirements are fulfilled:

The housing is closed

The terminal blocks are wired correctly

The terminal blocks for the operating supply are connected

Installation site requirements

Verify that there is at least 4 in (10 cm) of space above and below the

device.

Verify that there is at least 0.8 in (2 cm) of space on the right and left

sides of the device.

Only operate the device in switch cabinets which comply with the fire

enclosure specifications described in EN 60950-1.

Housing

Only technicians authorized by the manufacturer are permitted to open

the housing.

Never insert pointed objects (narrow screwdrivers, wires, etc.) into the

device or into the connection terminals for electric conductors. Do not

touch the connection terminals.

Keep the ventilation slits free to ensure good air circulation.

Install the device in the vertical position.

8Installation GECKO

Release

07/2014

CE marking

The labeled devices comply with the regulations contained in the following

European directive(s):

2011/65/EU (RoHS)

Directive of the European Parliament and of the Council on the restriction

of the use of certain hazardous substances in electrical and electronic

equipment.

2004/108/EC (EMC)

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electromagnetic

compatibility.

In accordance with the above-named EU directive(s), the EU conformity

declaration will be at the disposal of the relevant authorities at the

following address:

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

The product can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55022

You find more information on technical and industry standards here:

“Underlying technical standards” on page 28

Warning! This is a class A device. This device can cause interference in

living areas, and in this case the operator may be required to take

appropriate measures.

Note: The assembly guidelines provided in these instructions must be

strictly adhered to in order to observe the EMC threshold values.

Installation GECKO

Release

07/2014 9

FCC note:

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference; (2) this device must accept any interference received,

including interference that may cause undesired operation.

Appropriate testing has established that this device fulfills the

requirements of a class A digital device in line with part 15 of the FCC

regulations.

These requirements are designed to provide sufficient protection against

interference when the device is being used in a business environment.

The device creates and uses high frequencies and can also radiate these

frequencies. If it is not installed and used in accordance with this

operating manual, it can cause radio transmission interference. The use

of this device in a residential area can also cause interference, and in this

case the user is obliged to cover the costs of removing the interference.

Recycling note

After usage, this device must be disposed of properly as electronic waste,

in accordance with the current disposal regulations of your county, state,

and country.

10 Installation GECKO

Release

07/2014

About this Manual

The documentation for your device is made up of the following documents.

You can find the documentation that is not provided as a printout with your

device as a PDF file under “Downloads” at

www.hirschmann.com/en/QR/INET-GECKO4TX_en-HB.

The Industrial HiVision network management software provides you with

additional options for smooth configuration and monitoring:

ActiveX control for SCADA integration

Auto-topology discovery

Browser interface

Client/server structure

Event handling

Event log

Simultaneous configuration of multiple devices

Graphical user interface with network layout

SNMP/OPC gateway

Legend

The symbols used in this manual have the following meanings:

Mounting instructions This document contains safety instructions and information that you

need for mounting the device.

Installation user

manual

This document contains a device description, safety instructions and

further information that you need for installing the device before you start

configuring it.

Configuration user

manual

This document contains the information that you need for starting up the

device. It takes you step by step from the first startup operation through

to the basic settings for operation in your environment.

Online help The online help contains descriptions of the individual parameters that

you configure via the graphical user interface.Use the “Help” button to

call up the online help in the graphical user interface.

The content of the online help corresponds to the information in the

“References” chapter of the configuration user manual.

Listing

Work step

Subheading

Other manuals for GECKO 4TX

Table of contents

Other Hirschmann Network Router manuals

Hirschmann

Hirschmann RSR20-0900 User manual

Hirschmann

Hirschmann PowerMICE User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann MACH 4002 Family User manual

Hirschmann

Hirschmann GigaLION-24TP User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann OWL-IPG-AMERICAS User manual

Hirschmann

Hirschmann RS2-5TX/FX Manual

Hirschmann

Hirschmann HiSecOS EAGLE20 User manual

Hirschmann

Hirschmann OWL LTE M12 User manual

Hirschmann

Hirschmann SPIDER 3TX-TAP Manual

Hirschmann

Hirschmann OWL3G User manual

Hirschmann

Hirschmann RS40 series User manual

Hirschmann

Hirschmann Power MICE User manual

Hirschmann

Hirschmann PowerMICE User manual

Hirschmann

Hirschmann RS30-...U Series User manual

Hirschmann

Hirschmann MACH104-20TX-FR Series User manual

Hirschmann

Hirschmann OWL LTE M12 User manual

Hirschmann

Hirschmann MM2-2FXM3/2TX1 Manual

Hirschmann

Hirschmann Power MICE User manual

Hirschmann

Hirschmann OWL3G User manual

Hirschmann

Hirschmann MACH 4000 Series User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann EAGLE30-0402 series User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview