Hirschmann RS20 series User manual

Industrial Protocols

Release

5.0

04/09

Technical Support

[email protected]

User Manual

Industrial Protocols

Industrial ETHERNET (Gigabit-)Switch

RS20/RS30/RS40, MS20/MS30, OCTOPUS, RSR20/RSR30,

Power MICE, MACH 100, MACH 1000, MACH 4000

With software L2E, L2P, L3E or L3P

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the en-

closed CD applies.

The performance features described here are binding only if they have been expressly guaran-

teed in the contract. This publication has been created by Hirschmann Automation and Control

GmbH according to the best of our knowledge. Hirschmann reserves the right to change the con-

tents of this manual without prior notice. Hirschmann can give no guarantee in respect of the

correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 5.0 -01-04/09 – 23.4.09

Content

Industrial Protocols

Release

5.0

04/09 3

Content

Content 3

About this Manual 5

Key 7

1 Industry Protocols 9

2 EtherNet/IP 13

2.1 Integration in Control System 14

2.2 EtherNet/IP Parameters 17

2.2.1 Identity Objekt 17

2.2.2 TCP/IP Interface Object 18

2.2.3 Ethernet Link Object 20

2.2.4 Ethernet Switch Agent Object 22

2.2.5 I/O Data 24

2.2.6 Mapping of the Ethernet Link Object Instances 25

2.2.7 Supported services 26

3PROFINETIO 27

3.1 Integration in Control System 30

3.1.1 Preparing the Switch 30

3.1.2 Configuration of the PLC 31

3.1.3 Configuring the device 37

3.1.4 Swapping devices 38

3.1.5 Swapping modules 39

3.1.6 Monitoring the network 40

3.2 PROFINET IO Parameters 44

3.2.1 Alarms 44

3.2.2 Record parameters 44

3.2.3 I/O Data 49

A GSD/EDS File Generator 53

B Reader´s comments 54

Content

4Industrial Protocols

Release

5.0

04/09

C Index 57

D Further support 59

About this Manual

Industrial Protocols

Release

5.0

04/09 5

About this Manual

The “Industry Protocols” user manual describes how the device is connected

by means of a communication protocol commonly used in the industry, such

as EtherNet/IP and PROFINET.

The following thematic sequence has proven itself in practice:

XDevice configuration in line with the “Basic Configuration” user manual

XCheck on the connection Switch <–> PLC

XProgram the PLC

The “Installation” user manual contains a device description, safety instruc-

tions, a description of the display, and all the other information that you need

to install the device before you begin with the configuration of the device.

The “Redundancy Configuration” user manual contains all the information

you need to select a suitable redundancy procedure and configure it.

You will find detailed descriptions of how to operate the individual functions

in the “Web-based Interface” and “Command Line Interface” reference

manuals.

The Network Management Software HiVision/Industrial HiVision provides

you with additional options for smooth configuration and monitoring:

XConfiguration of multiple devices simultaneously.

XGraphical interface with network layouts.

XAuto-topology discovery.

XEvent log.

XEvent handling.

XClient / Server structure.

XBrowser interface

XActiveX control for SCADA integration

XSNMP/OPC gateway

About this Manual

6Industrial Protocols

Release

5.0

04/09

Key

Industrial Protocols

Release

5.0

04/09 7

Ke y

The designations used in this manual have the following meanings:

Symbols used:

XList

Work step

Subheading

Link Indicates a cross-reference with a stored link

Note: A note emphasizes an important fact or draws your

attention to a dependency.

Courier ASCII representation in user interface

Router with firewall

Switch with firewall

Router

Switch

Bridge

Hub

Key

8Industrial Protocols

Release

5.0

04/09

A random computer

Configuration Computer

Server

PLC -

Programmable logic

controller

I/O -

Robot

Industry Protocols

Industrial Protocols

Release

5.0

04/09 9

1 Industr y Pr otocols

For a long time, automation communication and office communication were

on different paths. The requirements and the communication properties were

too different.

Office communication moves large quantities of data with low demands with

respect to the transfer time. Automation communication moves small

quantities of data with high demands with respect to the transfer time and

availability.

While the transmission devices in the office are usually kept in temperature-

controlled, relatively clean rooms, the transmission devices used in

automation are exposed to wider temperature ranges. Dirty, dusty and damp

ambient conditions make additional demands on the quality of the

transmission devices.

With the continued development of communication technology, the demands

and the communication properties have moved closer together. The high

bandwidths now available in Ethernet technology and the protocols they

support enable large quantities to be transferred and exact transfer times to

be defined.

With the creation of the first optical LAN to be active worldwide, at the

University of Stuttgart in 1984, Hirschmann laid the foundation for industry-

compatible office communication devices. Thanks to Hirschmann's initiative

with the world's first rail hub in the 1990s, Ethernet transmission devices such

as switches, routers and firewalls are now available for the toughest

automation conditions.

The desire for uniform, continuous communication structures encouraged

many manufacturers of automation devices to come together and use

standards to aid the progress of communication technology in the automation

sector. This is why we now have protocols that enable us to communicate via

Ethernet from the office right down to the field level.

Industry Protocols

10 Industrial Protocols

Release

5.0

04/09

Figure 1: Example of communication.

Hirschmann switches support the following industry protocols and systems

XEtherNet/IP

XPROFINET

InputOutput

Ethernet Input

Output

Other manuals for RS20 series

This manual suits for next models

Table of contents

Other Hirschmann Network Router manuals

Hirschmann

Hirschmann OCTOPUS 5TX-EEC Manual

Hirschmann

Hirschmann RS20 series Owner's manual

Hirschmann

Hirschmann RSB20 User manual

Hirschmann

Hirschmann MACH104-16TX-PoEP+2X Series User manual

Hirschmann

Hirschmann MICE MS20-1600 Series User manual

Hirschmann

Hirschmann EAGLE30-0402 series User manual

Hirschmann

Hirschmann SPIDER Premium Line User manual

Hirschmann

Hirschmann MACH 1020 User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann RSB20-0800T1T1 User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann MACH 1020 User manual

Hirschmann

Hirschmann Power MICE User manual

Hirschmann

Hirschmann GigaLION-24TP User manual

Hirschmann

Hirschmann GECKO 4TX User manual

Hirschmann

Hirschmann OWL3G User manual

Hirschmann

Hirschmann MACH104-20TX-F Series User manual

Hirschmann

Hirschmann RS2-5TX/FX Manual

Hirschmann

Hirschmann OWL LTE M12 User manual

Hirschmann

Hirschmann MACH 1020 User manual

Hirschmann

Hirschmann PowerMICE User manual

Hirschmann

Hirschmann MACH104-20TX-FR Series User manual

Hirschmann

Hirschmann MACH 4002 Family User manual

Hirschmann

Hirschmann RS20 series User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview