Hammerhead HLFL01 User manual
ATTACH YOUR RECEIPT HERE
Serial Number ______________________ Purchase Date_______________________
Questions, problems, missing parts? Before returning to your retailer,
call our customer service department at 1-877-888-1880, 8:30 a.m. – 8:00
p.m. EST (Monday – Friday) & 10:00 a.m. – 6:00 p.m. EST (Saturday and
Sunday).
FLOORING LASER
MODEL HLFL01
2 FLOORING LASER
TABLE OF CONTENTS
Technical Specications ...........................................2
Safety Instructions ...............................................3
Unpacking .....................................................5
Description.....................................................6
Operation ......................................................7
Maintenance....................................................8
Troubleshooting .................................................9
Warranty......................................................10
TECHNICAL SPECIFICATIONS
COMPONENT SPECIFICATIONS
Model HLFL01
Accuracy of the laser lines ± 3/8inch at 30feet
Operating range (depending on room illumination) 65 feet
Power supply 3V (2 x 1.5V AA alkaline
battery)
Laser
λ=635nm, Class II laser,
maximum laser
output≤1mW
Operating temperature 32°F to 122°F (0ºC to 50ºC)
Storage temperature 14°F to 158°F (-10ºC to 70ºC)
WARNING
Regularly check the calibration before use, after transport and after extended
periods of storage.
FLOORING LASER 3
SAFETY INSTRUCTIONS
Safety Instructions for Flooring Laser
WARNING
Read the operating instructions and additional notices completely. Follow the
instructions they contain. Safely keep these documents for future reference.
Flooring Laser
CAUTION
Do not look directly into the beam. Lasers
must be kept out of reach of children. Never
intentionally aim the device at people. This is
a quality laser measuring device and is 100%
factory adjusted within the stated tolerance.
For reasons of product liability, we must
also draw your attention to the following:
Regularly check the calibration before use,
after transport and after extended periods
of storage. We also wish to point out that absolute calibration is only possible
in a specialist workshop. Calibration by yourself is only approximate and the
accuracy of the calibration will depend on the care with which you proceed.
WARNING
This is a precision instrument product which must be handled with care. Avoid
impacts and jarring. Store and transport the instrument in its case! All lasers off!
Clean with a soft cloth and glass cleaner.
SERIAL NO.
SERIE NO.
MADE IN CHINA
HECHO EN CHINA
Model/ Modelo: HLFL01
3V 2×1.5 V AA Battery
3V Batería AA 2×1,5 V
Flooring Laser
Láser para pisos
LASER RADIATION–DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL RAYO
635nm, OUTPUT
≤
1mW/CLASS II LASER PRODUCT
COMPLIES WITH 21 CFR PARTS 1040.10 AND 1040.11
PRODUCTO LÁSER CON SALIDA
≤
1mW.CLASE II, 635 nm,
CUMPLE CON LAS SECCIONES 21 CFR 1040.10 Y 1040.11
CAUTION / PRECAUCIÓN
AVOID EXPOSURE/ EVITE LA EXPOSICIÓN
LASER RADIATION IS EMITTED FROM
THIS APERTURE / LA RADIACIÓN LÁSER
SE EMITE DE ESTA ABERTURA
4 FLOORING LASER
SAFETY INSTRUCTIONS
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer
or an experienced radio/TV technician for help.
DANGER
People with electronic devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of electrical equipment in
close proximity to a heart pacemaker could cause interference or failure of the
pacemaker.
FLOORING LASER 5
UNPACKING
When unpacking the box, do not discard any packing materials until all of the
contents are accounted for:
a. Open the carton to locate the following:
• Flooring Laser
• 2 pcs 1.5V AA battery
• Operator’s manual
b. Carefully lift the flooring laser out of the carton and place it on a
stable, flat surface.
6 FLOORING LASER
DESCRIPTION
KNOW YOUR FLOORING LASER
This ooring laser is a highly versatile tool designed for fast, easy operation.
The Flooring Level’s two laser lines make it the ideal instrument for all types of
alignment work on the oor. The two illuminated level vials can be used to level
the tool to project plumb lines on walls. The inboard, 90° try-square edge makes
it easy to align the rst oor tile.
1
2
6
2
7
6
45
8
3
PARTS DESCRIPTION
1ON / OFF switch
2Level vials for accurate vertical wall projection
3Laser-output windows
490° square edge
5Levelling foot, removable for tripod applications (1/4” threads)
6Levelling foot adjustment
7Battery compartment
8Tripod-levelling adjustments
FLOORING LASER 7
OPERATION
1. INSERTING BATTERIES
Open the battery compartment (7) and
insert batteries according to the polarity
symbols. Be sure to pay attention to
polarity.
2. ON-FLOOR APPLICATIONS
Turn on the unit with the ON / Off switch
(1). The lasers now project two lines at a
90° angle onto the oor. These projected
lines allow tiles to be laid precisely. The 90° square edge (4) makes it easy to
align the rst oor tile.
NOTE:
If an uneven oor interrupts the laser lines, the tripod can be used to raise the
laser for better line projection onto the oor Use the level vials to adjust the
tripod levelling foot adjustments.
3. WALL APPLICATIONS
The laser beams also project very visible laser lines on walls. It is recommended
to use no more 10 feet from the wall. Level the instrument with its levelling feet
(5,6) according to the level vials (2). The level vials are back-lighted to guarantee
good visibility even in reduced ambient light.
8 FLOORING LASER
MAINTENANCE
All maintenance should only be carried out by an authorized service organization.
This ooring laser has been designed to be a low-maintenance tool. However, in
order to maintain its performance, follow these steps.
a. HANDLE the tool with care. Treat it as a precision optical device, such as a
camera or binoculars.
b. AVOID exposing the tool to shock, continuous vibration or extreme hot or
cold temperatures.
c. STORE the tool indoors and in a safe place.
d. DO NOT immerse the laser in water.
e. Check the batteries regularly to avoid corrosion.REMOVE the batteries from
the tool if it is not going to be used for an extended period.
f. Always store the tool indoors.
g. Always keep the tool free of dust and liquids. Use only a clean, soft cloth for
cleaning. Avoid using any solvents.
h. After you have nished using the tool, always make sure that the switch is
in the off position.
FLOORING LASER 9
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The tool cannot be
turned on.
Batteries are depleted. Replace with new
batteries.
Batteries are installed in
wrong polarity. Reinstall the batteries.
Laser is not
projected.
Laser ON/OFF button is not in
ON position.
Check to make sure
the switch is in ON
position.
Laser point
projection is weak. Batteries are low voltage. Replace with new
batteries.
10 FLOORING LASER
WARRANTY
3 YEAR LIMITED WARRANTY
This ooring laser is warranted to the original purchaser from the original
purchase date for two years, plus one additional year with product registration
at www.hammerheadtools.com (2+1), for a total three years subject to the
warranty coverage described herein.
Please retain your receipt.
This ooring laser is warranted to the original user to be free from defects in
material and workmanship. If you believe that the tool is defective at any time
during the specied warranty period, call HAMMERHEAD support at 1-877-
888-1880 to speak with a customer service agent. This warranty does not
cover: (1) Part failure due to normal wear or tool abuse (2) Any parts have been
altered or modied by anyone other than authorized HAMMERHEAD personnel.
This warranty excludes bits, bulbs and accessories. This warranty gives you
specic legal rights, and you may also have other rights that vary from state.
Table of contents
Languages:
Other Hammerhead Measuring Instrument manuals
