EXFO FTB-1v2 Pro User manual
FTB-1v2 and FTB-1v2 Pro
Accessing Connectors and Ports
Headset/microphone port
(for 3.5 mm connectors)
MicroSD card slot
(for cards compatible with the SDXC format)
USB 2.0 host ports
Ethernet (RJ-45) port
AC adapter/charger
connector
USB 3.0 host port
Module
Built-in power meter and VFL
(optional)
Mating connector
Replacing the Battery
1
2
Turn off the unit (shutdown) and disconnect it from AC power.
Using a flat screwdriver, turn the screws
counterclockwise until the module is loose.
Charging the Battery
Connect your unit to AC power with the
provided AC adapter/charger.
Pull on the battery’s tab to free it from its socket.
Slide in the new battery (poles facing down and
pointing to the same side of the case as
the mating connector). 7
8
Battery status LED
Green: Fully charged
Green, blinking: Charging
Yellow: Battery level is low
Position the unit so that its front panel rests on a flat surface such as a table.
6
Mating connector
Battery poles
Using a flat screwdriver, turn the screws clockwise until they are tighten.
10
3
4While holding the front panel and the module firmly together, turn the unit over, and position it so that the
module rests on a flat surface such as a table.
5Hold the front panel by its sides and pull it up.
Connection slot for the
module
Place the front panel on the module making sure that
the mating connector of the module is well aligned
with the corresponding slot on the front panel.
9While holding the front panel and the module firmly together, turn the unit over, and position it so that its
front panel rests on a flat surface such as a table.
Quick Reference Guide
© 2017 EXFO Inc. All rights reserved.
Printed in Canada (2017-05)
P/N: 1071546 Version: 2.0.0.1 For more information,
refer to the user guide.
Using Your Unit Attaching Modules
1
WARNING
To avoid electrical shock, always shut down the unit, and
disconnect it from its external power source BEFORE removing a
module.
Never remove a module while the unit is turned on. This will result
in immediate and irreparable damage to both the module and unit.
2Place the front panel on the module making sure that the mating connector of the module is well
aligned with the corresponding slot on the front panel.
Using a flat screwdriver, turn the screws clockwise
until they are tightened.
To adjust brightness
Information about the connected module
To start the applications related to the module
To retrieve information about your unit
To view the online help
Keyboard/screen capture button
Press once to show the on-screen keyboard.
Press once again to hide it.
Hold down for a few seconds to take a screen
capture.
Task-switching button
Press once to view the list of running applications.
Press as many times as needed to select the desired
application.
On/Off button
Press to turn the unit on.
Press to shut down the unit (default
behavior).
Button bar
To access modules and instruments, test
tools, utilities, documentation, and
to configure your unit
Mating connector
Connection slot for the module
3While holding the front panel and the module firmly together, turn the unit over, and position it so that
its front panel rests on a flat surface such as a table.
Position the module so that its back panel rests on a flat surface such as a table.
The battery should be visible.
4
Other manuals for FTB-1v2 Pro
1
This manual suits for next models
1
Other EXFO Measuring Instrument manuals
EXFO
EXFO R5000 User manual
EXFO
EXFO IQ-5500 User manual
EXFO
EXFO FTB-5600 User manual
EXFO
EXFO IQS-1100 User manual
EXFO
EXFO FTB-740 DWOCC Series User manual
EXFO
EXFO IQS-1700 User manual
EXFO
EXFO FLS-2600B User manual
EXFO
EXFO FTB-2 Pro User manual
EXFO
EXFO FOT-10A User manual
EXFO
EXFO T100S-HP Series Operating instructions
EXFO
EXFO FTB-5800 User manual
EXFO
EXFO FTB-5230S User manual
EXFO
EXFO PMD Analyzer 5500B User manual
EXFO
EXFO FTB-2 Operation and maintenance manual
EXFO
EXFO IQ-5320 User manual
EXFO
EXFO FTB-2 Operation and maintenance manual
EXFO
EXFO FTB-2 Operation and maintenance manual
EXFO
EXFO IQS-5320 User manual
EXFO
EXFO FLS-2200 User manual
EXFO
EXFO T500S User manual
