Elcometer 119 User manual

www.elcometer.com

Elcometer 119

Pipe Pit Gauge

User Guide

R

1 OVERVIEW

R

www.elcometer.com

The gauge shows the pit depth compared to the nominal pipe wall

thickness.

The Elcometer 119 Pipe Pit Gauge is a pocket sized gauge designed to

identify the condition of a pipe.

The gauge is placed horizontally on the surface of the pipe and the stylus

is positioned into the base of the corrosion pit.

2 TAKING A READING

1 Place the long edge of the Elcometer 119 Pipe Pit Gauge against the test surface.

2 Push the indicator arm until the stylus touches the bottom of the pit or crater.

3 Read the pit depth off the scale in line with the top edge of the indicator arm.

The instrument can be used to compare the pit depth with the pipe thickness. A scale showing pipe

diameters with corresponding wall thickness is marked on the gauge, adjacent to the pit depth scale.

When the indicator arm is in line with the pipe diameter this shows that the pit is approximately the same

depth as the wall thickness.

www.elcometer.com

R

3 TECHNICAL SPECIFICATION

Range*: 0 - 0.5"

Graduation*: 0.0625" and 0.01"

Dimensions: 68 x 133 x 4mm (21 x 5.25 x 0.18”)

Weight: 227g (8oz)

* Imperial units only.

Please ensure that all packaging is disposed of in an environmentally sensitive manner. Consult your local Environmental Authority for further guidance.

All other trademarks acknowledged.

© Elcometer Limited 2011 - 2019. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or

translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of

Elcometer Limited

is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU. United Kingdom

R

R

TMA-0502 Issue 02 - Text with cover 4278

Table of contents

Other Elcometer Measuring Instrument manuals

Elcometer

Elcometer 415 User manual

Elcometer

Elcometer 138 User manual

Elcometer

Elcometer 102 User manual

Elcometer

Elcometer 6014 User manual

Elcometer

Elcometer 406L User manual

Elcometer

Elcometer PG70 User manual

Elcometer

Elcometer 456 IPC User manual

Elcometer

Elcometer 456 User manual

Elcometer

Elcometer SCM400 User manual

Elcometer

Elcometer 3000 Series User manual

Elcometer

Elcometer 319 Standard User manual

Elcometer

Elcometer MTG2 User manual

Elcometer

Elcometer 550 User manual

Elcometer

Elcometer SAGOLA Classic S1 User manual

Elcometer

Elcometer 139 User manual

Elcometer

Elcometer Protovale 331 User manual

Elcometer

Elcometer 308 User manual

Elcometer

Elcometer G116A-1 User manual

Elcometer

Elcometer Adhesion Verification Unit User manual

Elcometer

Elcometer 116c User manual

Elcometer

Elcometer 456 User manual

Elcometer

Elcometer 456 User manual

Elcometer

Elcometer SG80 User manual

Elcometer

Elcometer 223 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual