Dwyer Instruments DPMF Series User manual

The Model DPMF Flush Mount LCD Digital Panel Meter offers high

performance and low cost in a compact package. This meter is designed

with a 3-1/2 digit, high contrast CD display. The unit is powered by a 4

to 20 mA DC control loop input. Standard features include adjustable

span and zero, and field-selectable decimal point position. The flat pack

of the panel meter allows for the instrument to be mounted to any flat

surface.

I STALLATIO

The Model DPMF is designed for surface mounting on any flat surface.

WIRI G

The unit is powered by a 4 to 20 mA loop and the screw terminals for

wiring are located on the back of the adder board marked with + PWR-.

Series DPMF Flush Mount LCD Digital Panel Meter

Installation and Operating Instructions

Bulletin PC-DPMF

SPECIFICATIO S

Input: 4 to 20 mA DC.

Input Impedance: 300 Ω nominal.

Accuracy: ±(0.1% FS + 2 count).

Power Supply: Powered by control loop.

Span and Zero: Adjustable (±1999 counts).

Display: 3-1/2 digits, 7 segments, 0.5˝ (12 mm) H.

Decimal Points: 3-position, user selectable.

Polarity: Automatic, “-” displayed.

Operating Temperature: 32 to 122°F (0 to 50°C).

Storage Temperature: -4 to 158°F (-20 to 70°C).

Mounting: Surface mount.

Connection: Screw terminals.

Conversion Rate: 3 per second.

Warm-Up: 10 minutes typical.

Weight: 1.2 oz (34.5 g).

Agency Approvals: RoHS.

1/4

[6.35]

7/8

[21.77]

[25.40]

Ø1/8

[Ø2.5]

2-3/16

[55.56]

1-1/8

[29.03]

2-3/8

[59.94]

TRANSDUCER

POWER

SUPPLY

ZERO

SPAN

J3 J2 J1

+ PWR -

J5 J4

DWYER I STRUME TS, I C.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGA CITY, I DIA A 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

OPERATIO

Selecting Decimal Point Position

Four decimal point positions are available on the digital panel meter.

Move the jumper to correspond the desired decimal point. See Figure 1.

Figure 1

Setting Min/Max Display Value J1, J2, J3 (see Figure 2 & 3):

If:

The minimum display is ≤0 or minimum display is > 0 and the (maximum

display minimum display) ≥ 5;

Then:

J1, J2 & J3 should be all set to the top jumper (see Figure 2).

Figure 2

If:

The minimum display is > 0 and the (maximum display minimum

display) <5;

Then:

J1, J2 & J3 should all be set to the bottom jumper (see Figure 3).

Figure 3

MAI TE A CE/REPAIR

Upon final installation of the Series DPMF, no routine maintenance is

required. The Series DPMF is not field serviceable and should be

returned if repair is needed. Field repair should not be attempted and

may void warranty.

WARRA TY/RETUR

Refer to “Terms and Conditions of Sale” in our catalog and on our

website. Contact customer service to receive a Return Goods

Authorization number before shipping the product back for repair. Be

sure to include a brief description of the problem plus any additional

application notes.

DWYER I STRUME TS, I C.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGA CITY, I DIA A 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

J3 J2 J1

•

Other Dwyer Instruments Measuring Instrument manuals

Dwyer Instruments

Dwyer Instruments MW-1 User manual

Dwyer Instruments

Dwyer Instruments 477B Series User manual

Dwyer Instruments

Dwyer Instruments 477A-1 User manual

Dwyer Instruments

Dwyer Instruments 477-000-FM User manual

Dwyer Instruments

Dwyer Instruments StabiliSENSE RPMC Series Installation and operating instructions

Dwyer Instruments

Dwyer Instruments Rate-Master RMC User manual

Dwyer Instruments

Dwyer Instruments 660 User manual

Dwyer Instruments

Dwyer Instruments DPMX Series User manual

Dwyer Instruments

Dwyer Instruments RVM Installation and operating instructions

Dwyer Instruments

Dwyer Instruments EMMA User manual

Dwyer Instruments

Dwyer Instruments UTG User manual

Dwyer Instruments

Dwyer Instruments TUF Series User manual

Dwyer Instruments

Dwyer Instruments A-705-20 User manual

Dwyer Instruments

Dwyer Instruments DPG-200 Series Installation and operating instructions

Dwyer Instruments

Dwyer Instruments HFPC Series Installation and operating instructions

Dwyer Instruments

Dwyer Instruments MS-021 User manual

Dwyer Instruments

Dwyer Instruments 460 Use and care manual

Dwyer Instruments

Dwyer Instruments SPPM Series Installation and operating instructions

Dwyer Instruments

Dwyer Instruments Slack Tube 1211-8 Operation and maintenance manual

Dwyer Instruments

Dwyer Instruments CM-3 User manual

Dwyer Instruments

Dwyer Instruments DPMW Series User manual

Dwyer Instruments

Dwyer Instruments Rate-Master RMV II Series User manual

Dwyer Instruments

Dwyer Instruments TM2 Series User manual

Dwyer Instruments

Dwyer Instruments 490A-1 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual