DT Research DT300Q Assembly instructions

Rugged Tablet

BASIC OPERATION GUIDE

DT300Q

INTRODUCTION

Thank you for acquiring the DT300Q, part of DT Research’s line of tablets. Featuring a slim yet robust

enclosure, the DT300Q with 8” TFT display is powered by the Intel® Atom™ quad-core or Qualcomm

octa-core processor, offering optimal combinations of performance and power savings. The DT300Q is

available with Microsoft® Windows® or Android operating system. The software operating system features

web browser, client/ server computing software, media player, accessories, and applications support.

PACKAGE CONTENTS

•One DT300Q with Battery Pack and Handstrap

•AC-DC Power Adapter with Power Cord

•Basic Operation Guide

* If your DT300Q contains camera or barcode scanner, please refer to the Tablet Modules Basic Operation

Guide for detailed operation.

DT300Q:

Input/ Output Ports Button Functions

Headphone Jack

BUTTON

ACTION

USB Port

power button

DC Power Input

Programmable Button without the

scanner module As Scanner Trigger

when equipped with the scanner

module

Back Camera (optional on DT380CR)

Battery Latch

Barcode Scanner (optional)

Power/Battery LED Status:

•Blue indicates the battery is 25% to 100% charged

•Blinking blue indicates the battery is charging

•Orange indicates that the battery is between 11% to 25%

•Blinking Orange indicates that the battery is below 10%

PRECAUTIONS

•Always exercise care when operating and handling the DT300Q.

•Do NOT apply excessive pressure to the display screen.

•Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT300Q

should face away from direct light to reduce glare.

•If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other

than the one provided or acquired from the manufacturer or its partners.

•In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the

DT300Q and disconnect all power sources. Report the problem to your device provider immediately.

•Never attempt to disassemble the DT300Q, as this will void the warranty.

BASIC FEATURES

The DT380CR/ DT380Q wireless tablet integrates a bright and multi-touch display, one USB port, and

embedded networking elements such as wireless LAN and Bluetooth. The DT300Q is complemented by a

suite of accessories, including battery gang charger, and charging cradles, for a comprehensive user

experience.

A DT300Q typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other wireless

devices or access points. If your DT300Q does not come with such a network adapter, please consult your

device provider to establish the desired network connectivity.

OPERATION

Powering ON and OFF

To activate the DT300Q, push and quickly release the Power Button. The display will come on in a few

seconds. To put the DT300Q in Standby mode, push and quickly release the Power Button. To turn the

DT300Q off for extended storage, power off safely using any software function that “shuts down computer”

provided in the software operating system.

NOTE:

The battery pack shipped with your tablet may be low in power—please use the AC-DC adapter with

the DT300Q when setting up for the first time to fully charge the battery pack.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink slowly. If plugging in the

AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may

have been drained substantially. Try unplugging/ replugging the AC-DC adapter to the DT300Q a few

times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the tablet in “Standby”

mode while not in use. Pushing briefly on the same button will wake up the system within seconds.

NOTE:

For DT380CR, avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this

form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal

operation.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed

after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be

established.

Configuring the Mobile Tablet

The DT300Q may be configured using the utilities and methods dictated by the software operating system.

The DT300Q should be configurable for various properties such as user profiles, network features, and several

system elements.

Wireless Networking

Wireless LAN

The DT300Q is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped with

a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT300Q should be able to detect all 802.11 access

points in the vicinity for you to select the access point of your choice for connection.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT300Q and the access points have to

match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or

advanced alternatives) for secure access.

•When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your

networking equipment literature to properly configure associated settings such as Authentication mode,

etc.

•Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth

The Bluetooth configuration application is enabled from the Windows System Tray or from the Android

Settings APP. Follow the instructions and options provided within the application to configure and invoke

Bluetooth connectivity with the corresponding peripherals.

USING THE MOBILE TABLET

Peripherals Support

Through its USB port, the DT300Q supports a wide range of USB-based peripherals. These peripherals are

applicable for software installation, applications storage, data storage, and system software recovery and

updates.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research website.

To Hold the Tablet

Left hand: grip the left back side of the tablet with your left hand

four index fingers, with thumb resting on the top of the back side

of the tablet and palm securely against the back.

Right hand: grip the right back side of the tablet with your right

hand four index fingers, with thumb resting on the top of the back

side of the tablet and palm securely against the back.

Specifications:

DT300Q

DT380CR

System

CPU

Qualcomm Octa-Core, 2.0GHz

Intel® Atom™ Quad Core, 1.44GHz (up to 1.92GHz)

RAM

4GB

Storage

64GB flash

128GB flash

Operating System

Android 9.0

Microsoft® Windows® 10 IoT Enterprise

Display

8” LED-backlight, high-brightness (850 nits) capacitive touch screen

Display Resolution

1920 x 1200

Network Interface

Wi-Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.2 LE

Fan/ Fanless

Fanless

Control Switch and

Buttons

1 power button and 1 trigger buttons

Speaker

Built-in Speaker

I/O Ports

USB port

1 (USB 3.0)

Audio Jack

1 (3.5mm)

DC-in

SD Slot

1 micro SD card slot

Mechanical

AC/DC Adapter

Input: 100 –240V AC; Output: 12V DC, 5A

Battery Pack

Hot swappable battery, 3.7V, 8800mAh

Enclosure

ABS + PC plastics and magnesium-aluminum alloy

Dimensions (H x W x D)

5.7 x 8.3 x 0.8 in/ 145.4 x 210 x 20.4 mm

Weight

1.99 lbs/ 900 g

Environmental

Operating Temperature

Operation: 32°F to 122°F (-0°C to 50°C); Storage: -4°F to 140°F (-20°C to 60°C)

Humidity

0% –90% non-condensing

FCC Regulatory Compliance

Warning: changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment.

The device has been tested for use against the body with 0mm separation in Specific Absorption

Rate (SAR) testing.

User must follow the specific operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifier Trade Name: , Model No.: SC600TA

Responsible Party –U.S. Contact Information

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

http://www.dtresearch.com

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com

This manual suits for next models

Table of contents

Other DT Research Tablet manuals

DT Research

DT Research DT301T-TR Assembly instructions

DT Research

DT Research DT313C Assembly instructions

DT Research

DT Research 313Y/MD Assembly instructions

DT Research

DT Research DT301 Assembly instructions

DT Research

DT Research DT312 Assembly instructions

DT Research

DT Research 373T/MD Assembly instructions

DT Research

DT Research DT362 Assembly instructions

DT Research

DT Research DT302RP Assembly instructions

DT Research

DT Research DT391UF User manual

DT Research

DT Research DT301Y Assembly instructions

DT Research

DT Research 316T/MD Assembly instructions

DT Research

DT Research DT317BT Assembly instructions

DT Research

DT Research DT391GS Assembly instructions

DT Research

DT Research DT395BV Assembly instructions

DT Research

DT Research DT311NV User manual

DT Research

DT Research DT301Y Assembly instructions

DT Research

DT Research 311Q Assembly instructions

DT Research

DT Research DT398H Assembly instructions

DT Research

DT Research DT300Q11 Assembly instructions

DT Research

DT Research 316T Assembly instructions

DT Research

DT Research DT313SC-MD Assembly instructions

DT Research

DT Research 306Q Assembly instructions

DT Research

DT Research DT313YR Assembly instructions

DT Research

DT Research DT361DM Assembly instructions

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual