DT Research DT301T Assembly instructions
DT301C/ DT301T
Rugged Tablet
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 201T, DT Research, Inc. All Rights Reserved.
BOG092717DT301ENG
Federal Communicaon Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment offand on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which•
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC Cauon: Any changes or modificaons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in conjuncon
with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of tablets —the
DT301C/ DT301T. Featuring a slim yet robust enclosure, the DT301C/ DT301T with
10.1”capacive touch display is powered by the Intel® processor, offering opmal
combinaons of performance and power savings. The DT301C/ DT301T is available with
Microso® Windows® operang system. The operang system features web browser,
client/ server compung soware, media player, accessories, and applicaons support.
PACKAGE CONTENTS
One•DT301C/ DT301T with Baery Pack and Handstrap
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Major opons, depending on configuraon:
Desktop Charging Cradle with DC-in Power Jack and Ethernet and USB Ports•
Wall/ Vehicle Mount Cradle with DC-in Power Jack and Ethernet and USB Ports•
Detachable Keyboard; connects automacally without switching and pairing, ideal for•
2-in-1 applicaons
Buon Funcons
BUTTON ACTION
Power buon
Programmable buons
Baery Latch •Push the switch up to unlock the latch, then slide the latch leto remove the baery.
RF switch
Input/ Output Ports
Headphone Jack 3.5mm
USB 3.0 Port
DC Power Input
Smart Card/CAC Reader
Back Camera
The DT301C/ DT301T
1
2
3
4
A
B
C
Baery/Power LED 2 3
4
1
E
D
D
E
A
C
B
ENGLISH 23ENGLISH
Precauons
Always exercise care when operang and handling the
•DT301C/ DT301T.
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Digital Pen (oponal) to keep the screen clean
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT301C/ DT301T should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
•
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT301C/ DT301T and disconnect all power sources. Report
the problem to your device provider immediately.
Never aempt to disassemble the
•DT301C/ DT301T, as this will void the warranty.
Basic Features
The DT301C/ DT301T rugged tablet integrates a bright display, one USB port, and
embedded networking elements such as wireless LAN and Bluetooth or oponal 4G.
The DT301C/ DT301T is complemented by a suite of accessories, including addional
hot-swappable baeries, charging cradles, and baery charger kit, for a comprehensive
user experience.
ADT301C/ DT301T typically integrates an 802.11ac wireless LAN (WLAN) adapter that
may connect to other wireless devices or access points. If your DT301C/ DT301T does not
come with such a network adapter, please consult your device provider to establish the
desired network connecvity.
OPERATION
Powering ON and OFF
To acvate the DT301C/ DT301T, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the DT301C/ DT301T in Standby mode, push and quickly
release the Power Buon. To turn the DT301C/ DT301T offfor extended storage, power off
safely using any soware funcon that “shuts down computer”provided in the soware
operang system.
NOTE:
The baery pack shipped with your tablet may be low in power. Please use the
AC-DC adapter with the DT301C/ DT301T when seng up for the first me to
fully charge the baery pack, or use the oponal baery charger kit.
NOTE:
When the baery pack is charging, the blue-colored Baery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity and
the LED stays dark, the baery pack may have been drained substanally. Try
unplugging/ replugging the AC-DC adapter to the DT301C/ DT301T a few mes to
acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby”mode while not in use. Pushing briefly on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
ENGLISH 45ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface
will be displayed aer a launch sequence of several seconds. The wireless LAN connecon
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT301C/ DT301T may be configured using the ulies and methods dictated by
the soware operang system. The DT301C/ DT301T should be configurable for various
properes such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT301C/ DT301T is oen delivered with an embedded (user-inaccessible) 802.11ac
WLAN adapter equipped with a hidden custom antenna.
T
•hrough the support of typical WLAN adapters, the DT301C/ DT301T will detect
802.11 access points in the vicinity for you to select the access point of your choice
for connecon.
T
•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301C/ DT301T and
the access points have to match. The SSID is case-sensive and it is recommended
that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure
access.
W
•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
R
•efer to the access point operang manuals for seng up the 802.11 access points.
ENGLISH 6
Bluetooth
The Bluetooth configuraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the appli-
caon to configure and invoke Bluetooth connecvity with the corresponding peripherals.
Desktop Cradle
The DT301C/ DT301T is complemented by an oponal Desktop Cradle for support,
pass-through charging, and connecon to a range of USB peripherals, including keyboard
and mouse. The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter,
two 4k-capable DisplayPort outputs, an Ethernet port, and four USB ports. Always seat
the DT301C/ DT301T securely onto the cradle. The cradle must be powered by the AC-DC
adapter for the Ethernet and USB ports to funcon. The baery pack on the DT301C/
DT301T may be recharged by connecng the AC-DC adapter directly to the DC-in port on
the DT301C/ DT301T or through the DC-in port on the Desktop Cradle while the DT301C/
DT301T is docked to the Cradle.
USING THE Mobile Tablet
Peripherals Support
Through its USB 3.0 port, the DT301C/ DT301T supports a wide range of USB-based
peripherals. These peripherals are applicable for soware installaon, applicaons
storage, data storage, and system soware recovery and updates. The DT301C/ DT301T is
also compable with custom mountable cradle opons. These securable and mountable
cradles provide an interface to VESA mounts and arms, and to ports that may include
USB, Ethernet, and pass-through power.
Remote Management
Depending on soware configuraon, the DT301C/ DT301T can be centrally managed for
asset monitoring and for soware control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
If the DT301C/ DT301T comes with a Mobile broadband module, please contact your
product and/or service provider for the SIM Card installaon procedures.
7ENGLISH
To Hold the Tablet
Lehand: grip the leback side of the tablet
with your lehand four index fingers, with thumb
resng on the top of the back side of the tablet
and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
This manual suits for next models
1
Other DT Research Tablet manuals
DT Research
DT Research DT365CT Assembly instructions
DT Research
DT Research DT390 Assembly instructions
DT Research
DT Research DT362GL Assembly instructions
DT Research
DT Research DT395 Assembly instructions
DT Research
DT Research DT398 SERIES User manual
DT Research
DT Research DT313SC-MD Assembly instructions
DT Research
DT Research WebDT 312 Assembly instructions
DT Research
DT Research DT372AP-TR Assembly instructions
DT Research
DT Research DT315CT Assembly instructions
DT Research
DT Research DT300Q Assembly instructions
DT Research
DT Research 301Y/MD Assembly instructions
DT Research
DT Research DT313T Assembly instructions
DT Research
DT Research DT395CR Assembly instructions
DT Research
DT Research 311Q Assembly instructions
DT Research
DT Research DT312 Assembly instructions
DT Research
DT Research DT301XC Assembly instructions
DT Research
DT Research DT315BT Assembly instructions
DT Research
DT Research DT307SC Assembly instructions
DT Research
DT Research DT318CR Assembly instructions
DT Research
DT Research DT301Q Assembly instructions
Popular Tablet manuals by other brands
Laser
Laser MID-1060 Quick operation guide
MUNBYN
MUNBYN IRT09J Easy setup guide
Motorola
Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide
Dell
Dell Latitude ST Setup and features information
Lenovo
Lenovo IdeaTab S6000L Hardware Maintenance Manual
Venturer
Venturer WT9L11 quick start guide
