DT Research DT340T Assembly instructions
Rugged Tablet
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2022, DT Research, Inc. All Rights Reserved. BOG012722 DT340T/340QENG
INTRODUCTION
Thank you for acquiring the DT340T/ 340Q, part of DT Research’s line of Rugged
Tablets. Featuring a robust enclosure, the DT340T/ 340Q with 14” TFT display is
powered by the Intel® Core™ i or Qualcomm octa-core processor, oering opmal
combinaons of performance and power savings. The DT340T/ 340Q is available
with Microso® Windows® or Android operang system. The soware operang
system features web browser, client/ server compung soware, media player,
accessories, and applicaons support.
PACKAGE CONTENTS
• One DT340T/ 340Q with Baery Pack and Handstrap
• AC-DC Power Adapter with Power Cord
• Basic Operaon Guide
DT340T/ 340Q
23
PRECAUTIONS
• Always exercise care when operang and handling the DT340T/ 340Q.
• Do NOT apply excessive pressure to the display screen.
• We recommend using the Digital Pen (oponal) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the DT340T/ 340Q should face away from direct light to
reduce glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use
any AC-DC adapter other than the one provided or acquired from the manufac-
turer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power o the DT340T/ 340Q and disconnect all power sources.
Report the problem to your device provider immediately.
• Never aempt to disassemble the DT340T/ 340Q, as this will void the warranty.
BASIC FEATURES
The DT340T/ 340Q rugged tablet integrates a bright display, USB ports, and
embedded networking elements such as wireless LAN and Bluetooth or oponal 4G.
A DT340T/ 340Q typically integrates an 802.11ac wireless LAN (WLAN) adapter
that may connect to other wireless devices or access points. If your DT340T/ 340Q
does not come with such a network adapter, please consult your device provider to
establish the desired network connecvity.
NOTE:
To obtain protecon consistent with any IP rang for the device, the I/O (audio,
power, USB, card reader, etc.) port doors must be closed. If the IP protecon is
compromised by mishandling or misuse, such as by leaving port doors open or
improperly closed, any resulng product damage will not be covered under any
DT Research warranty.
Button Functions
BUTTON ACTION
Power Buon
Programmable Buons
Baery Latch *Push the switch to unlock the latch, then slide the latch le to remove the baery.
Input/ Output Ports
Ethernet Port
USB 3.0 Port
HDMI Output (DT340T)
Audio Jack
DC-in
Smart Card Reader
Tabletop Stand
Ethernet Port (340Q)
DC-in (340Q)
1
2
3
A
B
C
D
G
H
I
F
E
Power LED Baery Indicator
3
3
F
E
A
C
G
I
H
D
B
B
2
1
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless
LAN connecon may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT340T/ 340Q may be congured using the ulies and methods dictated by
the soware operang system. The DT340T/ 340Q should be congurable for various
properes such as user proles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT340T/ 340Q is oen delivered with an embedded (user-inaccessible) 802.11ac
WLAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT340T/ 340Q should be able
to detect all 802.11 access points in the vicinity for you to select the access point
of your choice for connecon.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT340T/ 340Q
and the access points have to match. The SSID is case-sensive and it is recom-
mended that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves)
for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly congure
associated sengs such as Authencaon mode, etc.
• Refer to the access point operang manuals for seng up the 802.11 access
points.
Bluetooth
The Bluetooth conguraon applicaon is enabled from the Windows System Tray
or from the Android Sengs APP. Follow the instrucons and opons provided
within the applicaon to congure and invoke Bluetooth connecvity with the
corresponding peripherals.
5
OPERATION
Powering ON and OFF
To acvate the DT340T/ 340Q, push and quickly release the Power Buon. The display
will come on in a few seconds. To put the DT340T/ 340Q in Standby mode, push and
quickly release the Power Buon. To turn the DT340T/ 340Q o for extended storage,
power o safely using any soware funcon that “shuts down computer” provided in
the soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT340T/ 340Q when seng up for the rst me to
fully charge the baery pack, or use the oponal baery charger kit.
NOTE:
When the baery packs are charging, the blue-colored Baery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity
and the LED stays dark, the baery pack(s) may have been drained substanally.
Try unplugging/ replugging the AC-DC adapter to the DT340T/ 340Q a few mes
to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby” mode while not in use. Pushing briey on the same buon
will wake up the system within seconds.
NOTE:
For DT340T, avoid using the Power Buon (“hold 4+ seconds” feature) to turn
o the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operaon.
4
7
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
If the DT340T/ 340Q comes with a mobile broadband module, please contact your
product and/or service provider for the SIM Card installaon procedures.
CAUTION:
There is danger of explosion if the baery is incorrectly replaced. Replace the
baery only with the Tablet manufacturer’s baery. Discard used baeries
according to the dealer’s instrucons.
CAUTION:
Do not aempt to disassemble the baery pack.
USING THE MOBILE TABLET
Peripherals Support
Through its USB 3.0 port, the DT340T/ 340Q supports a wide range of USB-based
peripherals. These peripherals are applicable for soware installaon, applicaons
storage, data storage, and system soware recovery and updates.
6
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
For the product take-back service informaon, please visit:
hp://www.dtresearch.com.tw/zh/About/csr.html
This manual suits for next models
1
Other DT Research Tablet manuals
DT Research
DT Research DT301T Assembly instructions
DT Research
DT Research WebDT 312 Assembly instructions
DT Research
DT Research DT372i Assembly instructions
DT Research
DT Research DT380CR Assembly instructions
DT Research
DT Research DT301XC Assembly instructions
DT Research
DT Research DT311T Assembly instructions
DT Research
DT Research DT372AP Assembly instructions
DT Research
DT Research DT370CR Assembly instructions
DT Research
DT Research DT311Y Assembly instructions
DT Research
DT Research DT318CR Assembly instructions
DT Research
DT Research DT520 Assembly instructions
DT Research
DT Research DT302RP Assembly instructions
DT Research
DT Research DT301C Assembly instructions
DT Research
DT Research DT395GS Assembly instructions
DT Research
DT Research DT362GL Assembly instructions
DT Research
DT Research DT370CR Assembly instructions
DT Research
DT Research DT398H Assembly instructions
DT Research
DT Research DT363GL Assembly instructions
DT Research
DT Research DT311YR Assembly instructions
DT Research
DT Research 313Y/MD Assembly instructions
Popular Tablet manuals by other brands
Laser
Laser MID-1060 Quick operation guide
MUNBYN
MUNBYN IRT09J Easy setup guide
Motorola
Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide
Dell
Dell Latitude ST Setup and features information
Lenovo
Lenovo IdeaTab S6000L Hardware Maintenance Manual
Venturer
Venturer WT9L11 quick start guide
