DT Research 306Q Assembly instructions

Rugged Handheld Tablet

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

INTRODUCTION

Thank you for acquiring the 306Q Rugged Handheld Tablet. The 306Q oers a

6” capacivetouch display, Qualcomm processor, and Android operang system

in a compact, rugged, and lightweight package. The 306Q enablesecient

point-of-service/sales applicaons, inventory management, and eld services.

The DT306 provides the precise features needed to streamline operaons and

improveproducvity, data accuracy, and service.

PACKAGE CONTENTS

• One 306Q

• One Baery Pack and Handstrap

• AC-DC Power Adapter

• Basic Operaon Guide

* The actual package contents may vary depending on the conguraon acquired.

306Q

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protecon against harmful interference in

a residenal installaon. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Cauon: Any changes or modicaons not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operaon is subject to the following two condions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operaon.

This device and its antenna(s) must not be co-located or operang in

conjuncon with any other antenna or transmier.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

Button Functions

BUTTON ACTION

Power Buon

Baery Latch

Trigger Buon

Input/ Output Ports

USB Type-C Port

Data Capture Modules

Barcode Scanner (oponal)

Magnec Stripe Reader (oponal)

Camera

PRECAUTIONS

• Always exercise care when operang and handling the 306Q.

• Do not disassemble any poron of the 306Q, as this will void any product

warranty.

• Do not use any power adapter or charging cradle other than the one provided

with thetablet or acquired from the manufacturer or its partners.

• In the unlikely event that abnormal noise, strange odor, or smoke is present,

immediatelypower down the 306Q and disconnect all power sources. Please

report theproblem to your device provider immediately.

The 306Q

OPERATION

Powering ON and OFF

To acvate the 306Q, push and quickly release the Power Buon. Thedisplay will come

on in a few seconds. To put the 306Q in Standby mode,push and quickly release the

Power Buon. To turn the 306Q o forextended storage, press the power buon and

then follow the steps on the screen.

NOTE:

The baery packs shipped with your tablet may be low in power - please usethe

AC-DC adapter with the 306Q when seng up for the rst meto fully charge

thebaery pack.

NOTE:

To conserve power, push and quick release the Power Buon to make thetablet

in standby mode while not in use. Pushing briey on the same buonwill wake

up the system.

BASIC MODULE OPERATION

3 steps to capture the data results from Keyboard Wedge:

1. Turn on module from the Keyboard Wedge App

2. Launch a note-related App

3. Capture the data and verify the result

Data Capture Module Operation Guide

If your 306Q comes with a Barcode Scanner, RFID Reader and/or MSR module(s),

youmay refer to the steps below to congure the sengs.

BARCODE SCANNER

Launch the scanner module, and adjust the parse data format :

1. Tap the Keyboard Wedge App , select SCAN tab,

and turn on the Scanner module

2. Key in Prex and Sux codes to adjust the parse data

format

3. Click OK

NOTE:

To ensure the system performance, turn on only the symbologies you aregoing to use.

Other DT Research Tablet manuals

DT Research

DT Research DT315CT Assembly instructions

DT Research

DT Research DT312 Assembly instructions

DT Research

DT Research DT390 Assembly instructions

DT Research

DT Research DT362GL Assembly instructions

DT Research

DT Research DT311Y Assembly instructions

DT Research

DT Research DT382GL Assembly instructions

DT Research

DT Research DT372AP-TR Assembly instructions

DT Research

DT Research WebDT 310 Assembly instructions

DT Research

DT Research DT390MD Assembly instructions

DT Research

DT Research DT372 Assembly instructions

DT Research

DT Research DT311H Assembly instructions

DT Research

DT Research DT315CR Assembly instructions

DT Research

DT Research DT311C Assembly instructions

DT Research

DT Research DT395CR Assembly instructions

DT Research

DT Research DT365 Assembly instructions

DT Research

DT Research DT301A Assembly instructions

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research DT301XC Assembly instructions

DT Research

DT Research DT391GS Assembly instructions

DT Research

DT Research DT362 Assembly instructions

DT Research

DT Research WebDT 360 Assembly instructions

DT Research

DT Research 313Y/MD Assembly instructions

DT Research

DT Research DT301Y Assembly instructions

DT Research

DT Research 340Q Assembly instructions

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual