Datacolor ColorReader EZ User manual
1
User Guide
2
Rev A, August 2020
All efforts have been made to ensure the accuracy of the information presented in this
format. However, should any errors be detected, Datacolor appreciates your efforts to
notify us of these oversights.
Changes are periodically made to this information and are incorporated into forthcoming
versions. Datacolor reserves the right to make improvements and/or changes in the
product(s) and/or program(s) described in this material at any time.
Copyright © Datacolor. All rights reserved. This material may not be reproduced or
duplicated, in whole or in part, with the express written permission of Datacolor.
To obtain information on local agents visit our website at www.datacolor.com
Contact Us
Please contact our service department by email for questions or issues.
goto.datacolor.com/colorreadersupport
In urgent cases you can contact us by phone.
Europe: 00800 700 800 70 USA: 800-438-2585
4
Introduction
Datacolor ColorReader EZ Model DC10-3 is an accurate color reader designed to
measure an inspiration color and report the nearest reference color from a proprietary
color system.
You can use Datacolor ColorReader EZ to quickly and accurately measure samples,
and find the closest color match in a fan deck collection stored on the mobile
application.
Bluetooth connectivity works with the Datacolor ColorReader mobile application when installed
on portable devices including cell phones and tablets. Using this mobile application you can
easily store, recall, and examine project color information in real time.
Requirements
The requirements to run the Datacolor ColorReader mobile application include:
Mobile Device
Operating System
iPhone®
iOS® v. 9.3 or higher
iPad®
iOS® v. 9.3 or higher
iPod Touch®
iOS® v. 9.3 or higher
Android®
v. 6.0 or higher
Bluetooth®
v. 4.0 or higher
Included
The packaging includes:
•the Datacolor ColorReader EZ measuring device
•two installed CR2032 lithium batteries
•welcome card with product information and link to goto.datacolor.com/getcrez
5
Getting Started
Install the Mobile Application
1. Go to your mobile device’s settings menu and turn on Bluetooth.
2. Ensure your Datacolor ColorReader EZ contains two working CR2032 lithium
batteries.
3. Install and open the Datacolor ColorReader mobile application from the Apple
App Store or Google Play Store.
4. Follow the on-screen instructions to turn on and connect your ColorReader EZ
unit, select your region, then complete the registration screen.
6
Calibration
Calibrate the unit every 8 hours to account for any changes over time. This ensures that
the readings remain consistent. The Datacolor ColorReader mobile application will
remind you when calibration is required.
1. Tap the yellow notification, or tap ‘Device’ and navigate to the ‘Calibration’ tab.
2. Follow the on-screen instructions to position the calibration tile.
3. Tap ‘Calibrate’ on the screen. The application will confirm calibration success.
7
Take Readings
When you find a color you want to capture, use the ColorReader EZ to take a reading
and find the color data or closest matches from popular color collections on the mobile
application.
1. Ensure the calibration tile is flipped back to expose the aperture.
2. Place the aperture over the area you want to read. The area should be flat and
the solid color completely fills the aperture area.
3. Tap ‘Read’ on the screen or press the ColorReader EZ button. The mobile
application will show the results.
On the left you will see the reading color.
On the right you will see the three closest matches to the reading within the color
collections available on your mobile application.
8
Mobile Application
From any menu, tap ‘Done’ to return to the main screen.
Device Menu
This menu allows you to manage your device.
Registration
Use this tab if you are given an exclusive access code to change your available color
collections to find matches for your readings
1. Enter the access code you were provided.
2. Tap ‘Register’. The mobile application will ask you to confirm then automatically
update your color collection list.
If you already entered an access code, this tab will have your access code information.
9
Device Info
Use this tab to disconnect your ColorReader EZ and confirm technical information about
your unit.
Calibration
Use this tab to see the current calibration status or run a new calibration.
Calibrate the unit every 8 hours to account for any changes over time. This ensures that
the readings remain consistent. The Datacolor ColorReader mobile application will
remind you when calibration is required.
1. Follow the on-screen instructions to position the calibration tile.
2. Tap ‘Calibrate’ on the screen. The application will confirm calibration success.
10
Support
Use this tab to be sent directly to the online support site where you can submit a ticket
or call our representatives for any issues you may be experiencing.
This manual suits for next models
1
Table of contents
Other Datacolor Measuring Instrument manuals
Datacolor
Datacolor 20D User manual
Datacolor
Datacolor SpyderTV User manual
Datacolor
Datacolor 45 Programming manual
Datacolor
Datacolor ColorReader DC10-2 User manual
Datacolor
Datacolor SpyderPRINT User manual
Datacolor
Datacolor 800 User manual
Datacolor
Datacolor CHECK II User manual
Datacolor
Datacolor 200 User manual
Datacolor
Datacolor 650 User manual
Datacolor
Datacolor 45 Programming manual
