D-Link DCS-1000 User manual

Package Contents:

•One Internet Camera

•Two External Wireless Antennas (DCS-1000W Only)

•One Installation CD-ROM

•One AC power adapter

•One Camera Stand

•One Category 5 Ethernet Cable

Note: If any of the contents are missing, please contact the reseller.

System Requirements

•Java Enabled and Compliant Web Browser

•CPU: Pentium II, 266 MHz or above

•Memory Size: 32 MB (64 MB recommended)

•VGA card resolution: 800x600 or above

•An 802.11b Access Point (for Infrastructure Mode) or another 802.11b

wireless adapter (for Ad-Hoc mode.)

Hardware Installation

•(DCS-1000W Only) Attach the Wireless

Antenna:From the rear panel of DCS-

1000W screw the 2 external antennas

that came with DCS-1000W into the

antenna connector.

D-Link Internet Camera

DCS-1000 & DCS-1000W

Installation Guide

•(DCS-1000W Only)Configure Network

Communication:From the rear panel of

DCS-1000W select the desired network

communication for DCS-1000W from the

Slide Switch. Position the Slide Switch to

the setting required either LAN or

LAN/WLAN position.

Please refer to the Physical Description

section for detailed information.

•Connect an Ethernet Cable

Connect an Ethernet cable to the network

cable connector located on the Internet

Camera’s rear panel and attach it to the

network.

We suggest using the Ethernet port to

configure the DCS-1000W and then

install the camera in its correct location.

Doing so will allow easy installation and

proper configuration.

•Attach the External Power Supply

Attach the external power supply to the

DC power input connector located on

the Internet Camera’s rear panel and is

labeled DC 5V and connect it to your

local power supply.

Note: Power source is confirmed when

the LED indicators label Power on the

Internet Camera is illuminated.

Configuring the IP address on your PC

The instructions contained in this section are intended for users of

Windows Me, 98 and 95. Please refer to the documentation for your

specific operating instructions for details on changing the IP address of

your computer so that you can access and configure the Internet Camera.

If your computer already uses an IP address of 192.168.0.x, please skip to

the next section.

•With your computer on,

open the Control Panel by

clicking the Start button,

select Settings, and click on

Control Panel.

•Find and Double Click the

Network Icon

•Under the configuration tab, find

and double click TCP/IP for the

network adapter used to

configure the Intenet Camera.

•Please make note of the IP

Address settings so that you can

change these settings back after

the configuration of the Internet

Camera is complete.

•Select Specify an IP address

and type “192.168.0.x” (the

number “x” can be replaced

with any number that will not

conflict with other devices on

your network). If your network

does not already use the

192.168.0.x IP address scheme,

then using the number “5” as

shown below will work.

•Click the “OK” button.

Windows may copy files

needed to complete your

settings.

•When asked, restart the PC. If

you are not asked, restart your

PC manually.

Configuring the Internet Camera

•Using your favorite web browser, type “http://192.168.0.20” in the address

box (the default IP address is 192.168.0.20)Press Enter.

•The Welcome screen of the Internet Camera will appear. Click “System

Administration” to access and change system settings.

•In the “Computer Name” field, type a name of your choosing that relates to

the camera or its location.

•In the “Location” field, type a description of your choosing.

•In the “Admin” field, type a username that will be used as the Administrator

account. We highly recommend that you change this setting now to enable

the highest security for the camera.

•Type a unique Admin Password into the “Admin Password” and “Confirm

Password” fields.

•In the Manually Assign section, input the correct settings for this camera into

the “IP Address”, “Subnet Mask” and “Default Gateway” fields. If you

are not sure what these settings should be, please contact your network

adminstrator to determine the correct settings.

•The Default Gateway is the IP address of your Router. This setting allows

the Internet Camera to be seen from the public Internet.

•Next, type in the “DNS IP Address” of your Domain Name System servers

into the cooresponding fields. These settings will be detirmined by your ISP.

•(DCS-1000W Only) The Wireless Interface section detirmines the 802.11b

Wireless configureation. Please enter correct values into the cooresponding

fields. These settings need to match the settings used by your wireless access

point when used in Infrastrucure mode, or your client PC when used in ad-

hoc mode. Refer to the Manual for more information

•In the LED Control Settings section, choosing one of the following:

§Normal: Lights operate normally.

§OFF: Lights will stay off.

§Dummy: Lights will operate randomly.

•Refer to the Manaul for instructions on how to use the “Loading Active X

From” setting.

•The Open Second Port section is reqired to be used when installing the

Internet Camera on a network with a public web server. Please refer to the

Manual for detailed information regarding this feature.

•Press the Save button to save the settings.

•The camera is now configured to work on your network. If you were

required to change the IP address of a computer on your network to make

these changes to the camera, you may now change the settings back to their

original settings.

•For instructions and details related to other settings related to System

Administration settings, please refer to the Manual.

Accessing the Streaming Video

•Using your favorite web browser, type “http://address” in the address box

where address is the IP address that you assigned to the camera from the

previous section. Press Enter.

•The Welcome screen of the Internet Camera will appear. Click on “View

Image –Java Mode” from the Home screen to access the streaming video.

•Next, you will want to adjust the focus of the lens. To do this, turn the lens

slowly in either clockwise or anti-clockwise direction until the desired image

appears. DO NOT over-turn the lens in either of the directions as it will be

out of focus. Unless you want to substitute the lens DO NOT unscrew more

than 1.0mm apart from the Fixed Lens Assembly.

•To help you get the best image quality, keep in mind that while adjusting the

Internet Camera’s focus you can preview the image quality from your Web

browser.

Tips and Technical Support

Tips

§If you are installing several cameras, it may be easier to use one

computer to configure all of them before you install them into the

planned location.

§(DCS-1000W Only) When using the camera in 802.11b mode, make sure

that the camera is located within operating distance of the wireless

access point. Also, pay attention to the number of walls and other

objects that my hinder the wireless affective operating distance.

§Make sure that you have the latest version of Java installed on your

computer to ensure proper operating when viewing the video in Java

mode. Java can be downloaded for free from Sun’s website

(http://www.sun.com/download/).

§Refer to the manual located on the CD-ROM for additional information

regarding all features and instructions related to the Internet Camera.

§If problems arise when installing the camera or viewing the video,

please refer to the Appendix section of the Manual for troubleshooting

tips. If the Manual does not answer your questions, please refer to the

D-Link technical support web page described in the next section.

Technical Support

D-Link provides free technical support for customers within the United

States during the warranty period. U.S. customers can contact D-Link

Technical Support through our web site, e-mail or by phone.

D-Link Technical Support over Telephone:

1-(877) 453-5465

24 Hours a Day, 7 Days a Week

D-Link Technical Support over the Internet:

www.dlink.com

[email protected]

Notes:

Building Networks for People

Other manuals for DCS-1000

This manual suits for next models

Table of contents

Other D-Link IP Camera manuals

D-Link

D-Link DCS-2530L User manual

D-Link

D-Link SECURICAM Network DCS-5300W User manual

D-Link

D-Link SECURICAM NETWORK DCS-5300 User manual

D-Link

D-Link DCS-6620G - Network Camera User manual

D-Link

D-Link DCS-930L Safety guide

D-Link

D-Link SECURICAM Network DCS-2100+ User manual

D-Link

D-Link DCS-942L Installation guide

D-Link

D-Link SECURICAM Network DCS-900 User manual

D-Link

D-Link DCS-1110 - Network Camera User manual

D-Link

D-Link DCS-2132L User manual

D-Link

D-Link DCS-3420 User manual

D-Link

D-Link DCS-932L Safety guide

D-Link

D-Link SECURICAM Network DCS-2100G User manual

D-Link

D-Link SECURICAM Network DCS-950 User manual

D-Link

D-Link DCS-1110 - Network Camera User manual

D-Link

D-Link DCS-5030L User manual

D-Link

D-Link DCS-2330L User manual

D-Link

D-Link DHA-390 User manual

D-Link

D-Link DCS-942L User manual

D-Link

D-Link SECURICAM Network DCS-5300W User manual

D-Link

D-Link DCS-1000 User manual

D-Link

D-Link DCS-6220G User manual

D-Link

D-Link WIRELESS G DCS-950G User manual

D-Link

D-Link DCS-1000 User manual

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual