CYP PU-507RX-2H User manual

PU-507RX-2H

5-Play™ HDBaseT™ Receiver with dual HDMI outputs

(inc. PoE & Single LAN, up to 100m)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 11/11/2013 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions.......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 D-Sub 9-Pin Denitions.........................10

6.4 IR Cable Pin Assignment .......................10

7. Connection Diagram .......................... 11

8. Specications...................................... 12

8.1 Technical Specications ........................12

8.2 CAT5e/6/7 Cable Specication ...........13

9. Acronyms............................................. 14

1. INTRODUCTION

The PU-507RX-2H Receiver allows uncompressed HDMI signals and IP

data to be received over a Single CAT5e/6/7 cable. This solution has the

added features of RS-232 and 2-way IR control functionality over the

same CAT5e/6/7 cable. These combined HDMI and control signals can

be transmitted up to lengths of 100 metres. This variant of the popular

PU-507-RX Receiver provides dual HDMI outputs for added exibility

enabling distribution to a second display within a zone as an alternative

to using an additional Distribution Amplier.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

howroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

HDMI over HDMI & CAT5e/6/7 with LAN/IR/RS232/Bidirectional PoE

Receiver

IR Receiver x 1

3.5mm Phone Jack to RS-232 Cable

Operation Manual

4. SYSTEM REQUIREMENTS

Input HDMI over CAT5e/6/7 Transmitter and output display with HDMI

input.

5. FEATURES

Supports all v1.4 HDMI resolutions plus 4k.

Supports Dual HDMI Outputs

Supports uncompressed video/audio up to 10.2Gbps

ommon supported resolutions: HDTV: 480p, 576p, 720p, 1080i, 1080p,

1080p24, 4K; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA.

HDMI, HDCP, & DVI compliant

Supports HDCP repeating and CEC functions

Uncompressed data transfer over single CAT cable (100m - CAT6/7;

80m - CAT5e)

Uncompressed video 1080p, 60Hz, 48bits

Audio support up to 7.1CH & Dolby TrueHD, DTS-HD

5-Play™ convergence: HDMI, LAN, POE & Control (IR & RS232)

Supports 3D signalsl

Note:

1. This system was tested with CAT6/23AWG cables, results may vary with

cables of a dierent specication.

2. The PoE function is designed for powering compatible Transmitter units

only non-PoE Transmitter will need their own power supply. Transmitter of

another brand may not be compatible.

3. Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI cable

and display in order for proper image displaying.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

HDMI OUT 1 HDMI OUT 2

LAN

RS232 OUT

CAT5e/6 to HDMI with LAN/IR/RS232 Receiver

1 2 3 4

1HDMI OUT 1 & 2:

Connect to HDMI displays for instant image display or cascade with

another family type Transmitter.

2LAN:

Connect to intra-net or internet service system for a total sharing rate

of 100Mbps within the link of Receiver.

Warning: DO NOT connect this slot with any of the CAT5e/6/7 port,

doing so may trigger a power shut down and may damage the

device.

3RS-232 OUT:

Connect to a PC/Laptop or RS-232 enabled device (with supplied

3.5mm Phone Jack to D-Sub 9-Pin adaptor) to transmit of RS-232

commands.

6.2 Rear Panel

POWER

DC 24V

CAT5e/6 IN

IR 2

BLASTER USB LINK

IR 1

EXTENDER

1 3 4 5 6 72

1POWER LED:

Once the power supply is connected the LED will illuminate.

2DC 24V:

Plug the 24V DC power supply into the unit and connect the adaptor

to an AC outlet.

3IR 2 BLASTER:

Connect to the supplied IR Blaster cable for IR signal transmission.

Place the IR Blaster in direct line-of-sight of the equipment to be

controlled.

4IR 1 EXTENDER:

Connect to the supplied IR Extender cable for IR signal reception.

Ensure that remote controller being used is within the direct line-of-

sight of the IR Extender.

5USB:

This port is reserved for rmware update only.

6LINK:

The link LED will illuminate when CAT5e/6/7 output have been

connected to the Receiver and the Receiver have connected with

display that shows image on screen.

7CAT5e/6 IN:

Connect this port to HDMI to CAT5e/6/7 Transmitter (with or without

PoE function) with CAT5e/6/7 cable to extend the signal up to 100m.

6.3 D-Sub 9-Pin Denitions

PIN DEFINE TX/RX

1 N/C

2 TxD/RxD

3 RxD/TxD

4 N/C

5 GND

6 N/C

7 N/C

8 N/C

9 N/C

6.4 IR Cable Pin Assignment

Power 3.3V

IR Blaster Signal

IR Signal

Power 3.3V

Ground

IR Extender

IR Blaster

Table of contents

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual