CYP CH-2527TXV User manual

CH-2527TXV & CH-2527RXV

4K UHD+ HDMI w/HDR over HDBaseT

Transmitter (PD) & Receiver (PSE)

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 09/03/06 Preliminary release

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................3

6. Operation Controls and Functions.................4

6.1 Transmitter's Front and Rear Panels......... 4

6.2 Receiver's Front and Rear Panels............ 6

6.5 IR Cable Pinouts ........................................ 8

6.6 RS-232 Pinout ............................................. 8

7. Connection Diagram ......................................9

8. Specications ................................................10

8.1 Technical Specications (Transmitter) .. 10

8.3 Video Specications............................... 12

8.4 Audio Specications............................... 13

8.4.1 Digital Audio................................... 13

8.5 Cable Specications .............................. 14

8.6 HDBaseT Features.................................... 15

9. Acronyms .......................................................16

1. INTRODUCTION

This transmitter and receiver set is a great solution for extending UHD

video and audio as well as Ethernet and control via a single run of

Cat.5e/6/7 cable over distances up to 100 meters. This extender set

complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as

well as supporting the legacy HDCP 1.x and HDMI 1.x standards.

Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video

sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-

bit sources with HDR, are able to be processed and extended by the

use of AVLC (Adaptive Visually Lossless Compression) when needed.

Multiple data and control interfaces are also provided, including IR,

RS-232 and LAN connections. The Transmitter (PD) is powered by PoH

(Power over HDBaseT) provided by the Receiver (PSE), allowing for

greater exibility within different installation scenarios.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

Transmitter

• 1×4K UHD HDMI w/HDR over HDBaseT Transmitter

• 1×48V/0.83A DC Power Adapter

• 1×Power Cord

• 1×3.5mm to IR Blaster Cable

• 1×Operation Manual

Receiver

• 1×4K UHD HDMI w/HDR over HDBaseT Receiver

• 1×3.5mm to IR Extender Cable

• 1×Operation Manua

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of "Premium High Speed" HDMI cables, and industry

standard Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

• HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

• HDCP 2.2 and HDCP 1.x compliant

• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output.

• Supports CEC bypass

• HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 70m/230ft at 4K

when using Cat.6a/7

• Supported HDBaseT feature set: HD Video & Audio, 100BaseT

Ethernet, PoH, and Control (Bi-directional IR/RS-232 pass-through)

• Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond

10.2Gbps (340MHz) allowing for support of sources up to 18Gbps

(600MHz) with no loss of visual quality

• The AVLC function allows manual selection between High Quality

(Full bandwidth) mode and Standard mode (Lower bandwidth,

activates at a lower bandwidth threshold)

• Supports pass-through of many audio formats including 8 channel

LPCM, Bitstream, and HD Bitstream

• Receiver (PSE) provides power to the Transmitter (PD) using PoH

(Power over HDBaseT)

Note: The PoH function is designed for powering compatible

Transmitter units only. Non-PoH Transmitters will need their own power

supply. Transmitters from other brands may not be compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front and Rear Panels

LINK

PWR

RS-232 IN

STD

UPDATE

SYNC

HQ/STD

ISP

STD

AVLC

1 2 3 5 64

HDMI INCAT5e/6/7 OUT

IR2

EXTENDER

IR1

BLASTER

89 10

1AVLC HQ/STD Switch: This switch allows the user to select which

compression mode to use when AVLC is active.

HQ (High Quality) mode uses the least amount of compression and

provides the highest possible visual quality (perceptually identical

to the original). In this mode, AVLC compression activates for any

signal requiring more than 9Gbps.

STD (Standard Quality) mode applies additional compression

methods to lower the bandwidth requirements even further,

improving transmission reliability at the cost of some visual delity.

In this mode, AVLC compression activates for any signal requiring

more than 7.5Gbps.

2ISP Pinhole: This button is reserved for factory use only.

3UPDATE Switch: This switch is reserved for factory use only. The

default setting is “STD”.

4RS-232 IN Port: Connect to a PC, laptop, or serial controllable

device for the extension of RS-232 signals between both ends of

the HDBaseT connection.

5LAN Port: Connect to an Ethernet supporting device or to your

local network, as appropriate, to extend the network to both ends

of the HDBaseT connection.

6SYNC LED: This LED will illuminate when a live input source is

detected.

HQ/STD LED: This LED will illuminate whenever the AVLC function

is active. A green LED indicates that AVLC is in HQ (High Quality)

mode. A red LED indicates that AVLC is in STD (Standard) mode.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active. The LED will blink with a regular

pattern if a Receiver is connected but there is not currently a live

signal. The LED will blink with an irregular pattern if a connection

error has occurred.

7IR1 BLASTER Port: Connect to the provided IR Blaster to transmit IR

signals from the other end of the HDBaseT connection to devices

within direct line-of-sight of the IR Blaster.

8IR2 EXTENDER Port: Connect to an IR Extender to receive IR control

signals and extend them to devices connected to the other end

of the HDBaseT connection. Ensure that the remote being used is

within direct line-of-sight of the IR Extender.

9CAT 5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver

with a single Cat.5e/6/7 cable for transmission of all data signals.

PoH will also be supplied when connected to a compatible PSE

Receiver.

10 HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box. DVI sources are supported

with the use of an HDMI to DVI adapter.

This manual suits for next models

Table of contents

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual