CYP CH-507RXWPL User manual

Operation Manual

CH-507RXWPL

HDMI over Single CAT5e/6/7 Wall-plate Receiver

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 13/01/15 Preliminary Release

RDV2 20/01/15 Updated Text & Diagrams

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Receiver Front Panel........................3

6.2 Receiver Rear Panel ........................4

6.3 IR Cable Pin Assignment..................4

7. Connection Diagram ............................ 5

Option 1: Point to Point..........................5

Option 2: Matrix System.........................6

8. Specications ........................................ 7

8.1 Technical Specications .................7

8.2 CAT5e/6/7 Cable Specication .....8

9. Acronyms ............................................... 8

1. INTRODUCTION

The HDMI over Single CAT5e/6/7 Wall-plate Receiver is designed

to receive uncompressed video, audio and IR control data from

a compatible transmitter over a single run of CAT5e/6/7 cable at

a distance of up to 60 meters. It has the added benet of control

through the built-in IR ports. Additionally, it can be powered by

a compatible transmitter unit via the Power over Cable (PoC)

functionality allowing for greater exibility in installations.

2. APPLICATIONS

• Extend an HDMI signal to a remote location

• Household entertainment sharing and control

• Showroom display and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI over Single CAT5e/6/7 Wall-plate Receiver

• 1×IR Extender

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI equipped source device (connected with HDMI cables) or

DVI equipped source (connected with DVI to HDMI cables)

• HDMI equipped display (TV or monitor) or AN HDMI equipped AV

receiver, connected with HDMI cables

• Industry standard CAT5e/6/7 cable

• Compatible PoC HDBaseT™ Receiver

5. FEATURES

• HDMI with 3D, 4K2K support, HDCP and DVI compliant

• Simultaneous tranmisson of uncompressed data over a single 60m

CAT5e/6/7 cable (35m for 4K2K signals)

• Uncompressed video support up to 1080p@60 Hz/36-bit

• High denition audio support up to LPCM 7.1CH, Dolby TrueHD,

Dolby Digital Plus and DTS-HD Master Audio

• Supports HDCP repeater and CEC bypass functions

• Easy to install wall plate design

Note:

1. This system was tested with CAT6/23AWG and CAT5e/24AWG

cables, results may vary with cables of a different specication.

2. The PoC function requires a compatible Transmitter unit.

Transmitters from other brands may not be compatible.

3. For playback of 4K2K HDMI source signals, a 4K2K capable display

and High Speed HDMI cables are required.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Receiver Front Panel

HDMI OUT

POWER

LINK

IR 1

EXTENDER

IR 2

BLASTER

1 2 3 4 5

IR 1 EXTENDER: Connect an IR Extender cable for IR signal

reception. Signals received will be transmitted to the transmitter

unit. Ensure that the remote being used is within the direct line-of-

sight of the IR Extender.

IR 2 BLASTER: Connect an IR Blaster cable for IR signal transmission.

IR signals received by an IR extender connected to the transmitter

unit will be transmitted by this blaster. Place the IR Blaster in direct

line-of-sight of the equipment to be controlled.

HDMI OUT: Connect to a HDMI equipped TV/monitor for display of

the HDMI source signal.

POWER LED: This LED will illuminate when the device is connected

and powered by a compatible transmitter unit via PoC.

LINK LED: This LED will illuminate when both the source connected

to the transmitter and the display connected to the receiver are

connected.

6.2 Receiver Rear Panel

CAT5e/6/7 IN: Connect to the transmitter unit with a single

CAT5e/6/7 cable for transmission of all data signals.

6.3 IR Cable Pin Assignment

1Power

IR Blaster Signal

IR Signal

Power

Ground

IR Extender

IR Blaster

7. CONNECTION DIAGRAM

Option 1: Point to Point

Note: The receiver is

powered via PoC by

the transmitter.

Power

Link

CAT 5e /6 OutLite

DC 24V

IR2 Extender

RS232 In IR1 Blaster

HDMI In

HDMI OUT

POWER

LINK

IR 1

EXTENDER

IR 2

BLASTER

7m3m 3m

60°

1.5m

60°

1.5m

60°

HDMI

Input

HDMI

Output

Power

Supply

HDTV

IR Extender

DVD/Blu-ray Player

IR Blaster

Single

CAT5e/6/7

Cable

IR Blaster

Compatible

Transmitter

unit with PoC

This manual suits for next models

Table of contents

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual