Burkert S030 User manual

Type S030

INLINE fitting

Operating Instructions

Bedienungsanleitung

Manuel d'utilisation

We reserve the right to make technical changes without notice.

Technische Änderungen vorbehalten.

Sous réserve de modifications techniques.

www.burkert.com

Operating Instructions 2211/05_EU-ML 00563875 ORIGINAL_FR

1. ABOUT THE OPERATING INSTRUCTIONS .................3

2. INTENDED USE ..........................................................................5

3. BASIC SAFETY INFORMATION .........................................6

4. GENERAL INFORMATION .....................................................9

5. OPERATING PRINCIPLE ........................................................9

6. TECHNICAL DATA .................................................................. 10

7. INSTALLATION ......................................................................... 23

8. MAINTENANCE ........................................................................ 33

9. SPARE PARTS AND ACCESSORIES ........................... 35

10. PACKAGING, TRANSPORT ............................................... 41

11. STORAGE ................................................................................... 42

12. DISPOSAL .................................................................................. 43

English

1. ABOUT THE OPERATING

INSTRUCTIONS

The Operating Instructions describe the entire life cycle of

the product. Please keep the Operating Instructions in a

safe place, accessible to all users and any new owners.

The Operating Instructions contain important safety

information.

Failure to comply with these instructions can lead to

hazardous situations. Pay attention in particular to the

chapters 3. Basic safety information and 2. Intended use.

▶The Operating Instructions must be read and understood.

Symbols used

DANGER

Warns against an imminent danger.

▶Failure to observe this warning can result in death or in

serious injury.

WARNING

Warns against a potentially dangerous situation.

▶Failure to observe this warning can result in serious

injury or even death.

English 3

CAUTION

Warns against a possible risk.

▶Failure to observe this warning can result in substantial

or minor injuries.

NOTICE

Warns against material damage.

Indicates additional information, advice or

important recommendations.

Refers to information contained in these Operating

Instructions or in other documents.

▶Indicates an instruction to be carried out to avoid a dan-

ger, a warning or a possible risk.

→Indicates a procedure to be carried out.

Definition of the term product

The term "product" used in these Operating Instructions

always refers to the fitting type S030.

English

2. INTENDED USE

Use of the product that does not comply with the

instructions could present risks to people, nearby

installations and the environment.

The fitting type S030 is intended to measure the flow

rate of clean fluids in pipes. The fitting type S030 can

be combined with a flow transmitter or a flow indicator,

fitted with a bajonett connection.

▶Use the product in compliance with the characteristics

and commissioning and use conditions specified in the

contractual documents, in the Operating Instructions

of the product and in the Operating Instructions of the

combined instrument.

▶Use the product only in combination foreign devices

or foreign components recommended or approved by

Bürkert.

▶Store, transport, install and operate the product

properly.

▶Only operate a product in perfect working order.

▶Only use the product as intended.

English 5

3. BASIC SAFETY INFORMATION

This safety information does not take into account any con-

tingencies or occurences that may arise during installation,

use and maintenance of the product.

The local safety regulations for which the operating

company is responsible including the staff in charge of

installation and maintenance.

Risk of injury due to high pressure in the installation.

▶Before any intervention on the installation, stop the

circulation of fluid, cut off the pressure and drain the

pipe.

▶Observe the fluid temperature-pressure dependency

depending of the product used.

Risk of burn injury due to high fluid temperatures.

▶Do not touch with bare hands the parts of the product

that are in contact with the fluid.

▶Before opening the pipe, stop the circulation of fluid

and drain the pipe.

Risk of injury due to the nature of the fluid.

▶Respect the prevailing regulations on accident preven-

tion and safety relating to the use of dangerous fluids.

English

Various dangerous situations

▶Do not use the fittings in PVC or PP in explosive

atmospheres.

▶Do not use the product in an environment incompatible

with the materials it is made of.

▶Do not subject the product to mechanical loads.

▶Do not make any modifications to the product.

▶Prevent any unintentional power supply switch-on.

▶Only qualified and skilled staff can carry out the instal-

lation and maintenance work.

▶Guarantee a defined or controlled restarting of the

process, after a power supply interruption.

▶Observe the general technical rules.

English 7

NOTICE

The product may be damaged by the fluid in contact

with.

▶Systematically check the chemical compatibility of

the component materials of the product and the fluids

likely to come into contact with them (for example:

alcohols, strong or concentrated acids, aldehydes,

alkaline compounds, esters, aliphatic compounds,

ketones, halogenated aromatics or hydrocarbons,

oxidants and chlorinated agents).

English

4. GENERAL INFORMATION

To contact the manufacturer of the product use following

address:

Bürkert SAS

Rue du Giessen

BP 21

F-67220 TRIEMBACH-AU-VAL

The addresses of our international branches can be found

on the Internet at: country.burkert.com

Warranty conditions

The condition governing the legal warranty is the con-

forming use of the product in observance of the operating

conditions specified in the Operating Instructions.

Information on the Internet

You can find the Operating Instructions and technical data

sheet regarding the type S030 at country.burkert.com

5. OPERATING PRINCIPLE

The fluid flowing in the piping makes the paddle-wheel turn.

The paddle-wheel rotational frequency f is proportional to

the flow rate.

English 9

Other manuals for S030

Table of contents

Other Burkert Measuring Instrument manuals

Burkert

Burkert ELEMENT 8228 User manual

Burkert

Burkert SE30 Ex Namur User manual

Burkert

Burkert 8644 AirLINE User manual

Burkert

Burkert 8030-SE30 Series User manual

Burkert

Burkert Flowave 8098 User manual

Burkert

Burkert 8025 Series User manual

Burkert

Burkert 8026 User manual

Burkert

Burkert 8232 User manual

Burkert

Burkert 8222 ELEMENT NEUTRINO User manual

Burkert

Burkert 8222 ELEMENT NEUTRINO User manual

Burkert

Burkert 8012 Series User manual

Burkert

Burkert 8071 User manual

Burkert

Burkert 8026 User manual

Burkert

Burkert 8756 User manual

Burkert

Burkert 8718 User manual

Burkert

Burkert Flowave 8098 User manual

Burkert

Burkert FLOWave S 8098 User manual

Burkert

Burkert 8228 ELEMENT User manual

Burkert

Burkert FLOWave S 8098 User manual

Burkert

Burkert 8025 Series User manual

Burkert

Burkert S020 User manual

Burkert

Burkert 8285 El. COND User manual

Burkert

Burkert 8743 User manual

Burkert

Burkert 8640 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual