Burkert 8030 User manual

Type 8030

INLINE Flowmeter

Operating Instructions

Bedienungsanleitung

Manuel d'utilisation

” (Fcs-Ural) . 

8 (351) 22-354-11

8 (351) 22-529-13

 Burkert -  “-- ”

(Fcs-Ural) . 

www.burkert-ural.ru 8 (351) 22-354-11

www.fcs-ural.ru 8 (351) 22-529-13

1. ABOUT THIS MANUAL ...........................................................3

2. INTENDED USE ..........................................................................5

3. BASIC SAFETY INFORMATION .........................................6

4. GENERAL INFORMATION .....................................................9

5. DESCRIPTION ..........................................................................10

6. TECHNICAL DATA ..................................................................13

7. INSTALLATION AND COMMISSIONING ..................... 19

8. MAINTENANCE ........................................................................ 30

9. ACCESSORIES ........................................................................32

10. PACKAGING, TRANSPORT ...............................................33

11. STORAGE ...................................................................................33

12. DISPOSAL OF THE DEVICE ............................................. 34

English

1. ABOUT THIS MANUAL

This manu al describes the entire life c ycle of the devi ce.

Please keep this manual in a safe place, accessible to all

users and any new owners.

This manual contains important safety information.

Failure to comply with these instructions can lead to

hazardous situations.

• This manual must be read and understood.

Symbols used

DANGER

Warns against an imminent danger.

• Failure to observe this warning can result in death or in

serious injury.

WARNING

Warns against a potentially dangerous situation.

• Failure to observe this warning can result in serious

injury or even death.

English 3

ATTENTION

Warns against a possible risk.

• Failure to observe this warning can result in substantial

or minor injuries.

NOTE

Warns against material damage.

• Failure to observe this warning may result in damage

to the device or system.

Indicates additional information, advice or

important recommendations.

refers to information contained in this manual or in

other documents.

Indicates a procedure to be carried out.

Definition of the word "device"

The word "device" used within this manual refers to the

flowmeter type 8030.

English

2. INTENDED USE

Use of the device that does not comply with the

instructions could present risks to people, nearby

installations and the environment.

• The 8030 flowmeter is intended exclusively to measure

flow rate in liquids.

• This device must be protected against electromagne-

tic interference, ultraviolet rays and, when installed

outdoors, the effects of climatic conditions.

• This device must be used in compliance with the

characteristics and commissioning and use conditions

specified in the contractual documents and in the user

manual.

• Requirements for the safe and proper operation of the

device are proper transport, storage and installation,

as well as careful operation and maintenance.

• Only use the device as intended.

Observe any existing restraints when the device is

exported.

English 5

3. BASIC SAFETY INFORMATION

This safety information does not take into account:

• any contingencies or occurences that may arise during

installation, use and maintenance of the devices.

• the local safety regulations that the operator must ensure

the staff in charge of installation and maintenance observe.

Danger due to high pressure in the installation.

Danger due to electrical voltage.

Danger due to high temperatures of the fluid.

Danger due to the nature of the fluid.

Various dangerous situations

• Prevent any unintentional power supply switch-on.

• Ensure that installation and maintenance work are

carried out by qualified, authorised personnel in

possession of the appropriate tools.

English

Various dangerous situations

• Guarantee a set or controlled restarting of the pro-

cess, after a power supply interruption.

• Use the device only if in perfect working order and

in compliance with the instructions provided in the

instruction manual..

• Observe the general technical rules when installing

and using the device.

• Do not use this device in explosive atmospheres.

• Do not use the device for the measurement of gas flow

rates.

• Do not use fluid that is incompatible with the materials

the device is made of.

• Do not use this device in an environment incompatible

with the materials it is made of.

• Do not subject the device to mechanical loads (e.g. by

placing objects on top of it or by using it as a step).

• Do not make any external modifications to the device. Do

not paint any part of the device.

English 7

NOTE

The device may be damaged by the fluid in contact

with.

• Systematically check the chemical compatibility of the

component materials of the device and the fluids likely

to come into contact with it (for example: alcohols,

strong or concentrated acids, aldehydes, alkaline

compounds, esters, aliphatic compounds, ketones,

halogenated aromatics or hydrocarbons, oxidants and

chlorinated agents).

NOTE

Elements / Components sensitive to electrostatic

discharges

• This device contains electronic components sensitive

to electrostatic discharges. They may be damaged

if they are touched by an electrostatically charged

person or object. In the worst case scenario, these

components are instantly destroyed or go out of order

as soon as they are activated.

• To minimise or even avoid all damage due to an elec-

trostatic discharge, take all the precautions described

in the EN 61340-5-1 and 5-2 norms.

• Also ensure that you do not touch any of the live elec-

trical components.

English

4. GENERAL INFORMATION

To contact the manufacturer of the device, use following

address:

Bürkert SAS

Rue du Giessen

BP 21

F-67220 TRIEMBACH-AU-VAL

The addresses of our international sales offices are avai-

lable on the internet at: www.burkert.com

Warranty conditions

The condition governing the legal warranty is the conforming

use of the device in observance of the operating conditions

specified in this manual.

Information on the Internet

You can find the user manuals and technical data sheets

regarding the type 8030 at: www.burkert.com

English 9

5. DESCRIPTION

Area of application

The 8030 flowmeter is intended to measure the flow rate of

neutral or slightly aggressive liquids free of solid particles.

Construction

The device is built with an SE30 electronic module and an

S030 fitting incorporating the measuring element. The device

can be mounted on any pipe from DN6 to DN65.

The electronic device can be removed without opening the

piping or stopping the process.

Depending on the version, the device has either one NPN

transistor output or two transistor outputs, NPN and PNP.

Electrical connection is made via a male fixed connector.

Measuring principle

The fluid flowing in the piping makes the paddle-wheel

turn. The sensor detects the rotation of the paddle-wheel

thus generating a signal which frequency f is proportional

to the flow rate Q, acc. to formula f = KxQ.

f = frequency in Hertz (Hz)

K = K factor of the S030 fitting used, in pulse/litre

Q = flow rate in litre/second

English

Other manuals for 8030

Table of contents

Languages:

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual