Bosch CLIMATE 5000 VRF RDCI Series Instruction Manual
6 720 862 466 (2017/05) GB
Before using your air conditioning system, please read this manual carefully and keep it for future reference.
CLIMATE 5000 VRF
Bosch VRF Intelligent Manager (Network Controller)
BVIM
Installation-user manual
Contents
1. SAFETY INFORMATION ................................................................................................................................................................3
2. ACCESSORIES ............................................................................................................................................................................3
3. BVIM GATEWAY CONTROLLER INSTRUCTIONS .............................................................................................................................. 4
4. SYSTEM INTRODUCTION .............................................................................................................................................................8
5. SETTINGS .................................................................................................................................................................................12
6. OPERATION INSTRUCTIONS .......................................................................................................................................................14
7. TROUBLESHOOTING .................................................................................................................................................................20
2 | Contents
6 720 862 466 (2017/05) CLIMATE 5000 VRF
1. SAFETY INFORMATION
The following contents are stated on the product and the operation manual, including usage, precautions against injury and property damage, and the methods of
using the product correctly and safely.After fully understanding the following contents (identifiers and icons), read the text body and observe the following rules.
■Identifier description
Identifier Meaning
Warning Means improper handling may lead to personal injury.
Caution Means improper handling may lead to personal injury or property damage.
■Icon description
lcon Meaning
Forbidden.
It indicates compulsory implementation. The compulsory subject-matter is indicated in the icon or by images or characters aside.
Warning
Delegate installation
■ Ensure qualified personnel install and maintain the equipment. Improper installation performed by the user without
permission may cause fire, electric,shock, personal injury or water leakage.
■Be careful when handling the BVIM gateway. Improper installation or use may result in injury or property damage.
Usage Warning
Forbidden Do not spray flammable aerosol to the BVIM gateway controller directly. Otherwise, fire may occur.
Forbidden Do not operate with wet hands or let water enter the BVIM gateway controller. Otherwise, electric shock may occur.
2. ACCESSORIES
Table 2-1
Accessory Name Qty. Sharp Purpose
Owner’s & Installation Manual 1
Control box 1
Power line 1
Communication socket with 3 terminals 8
Communication socket with 6 terminals 1
One Button battery 1
Note:
As the product updates, this document will be changed without prior notice.
NOTE
CLIMATE 5000 VRF 6 720 862 466 (2017/05)
SAFETY INFORMATION |3
■Do not install where naked flames are present;
■Ensure you don’t over tighten or press terminals when tightening. This may break the BVIM or cause over heating of the module.
Before carefully read this manual, do not connect the control system power, and do not do any installation work, until the preparation work has been done.
3. BVIM GATEWAY CONTROLLER INSTRUCTIONS
CAUTION
■Do not install near where has electromagnetic interference or network stations;
■Do not install near a place with any heat source and steam source or flammable gas source, which will affect the operation of this product.
■Installation should comply with the local rules
■Ensure there is enough installation space and space to maintain the product.
3.1. BVIM Gateway controller structure
1) Front view of BVIM gateway controller (Unit: mm)
251
173
292.5
319
Fig.3-1
2) Side view of BVIM gateway controller (Unit: mm)
319±1
66.4±1
Fig.3-2
4 | BVIM GATEWAY CONTROLLER INSTRUCTIONS
6 720 862 466 (2017/05) CLIMATE 5000 VRF
3) Detailed drawing of installation holes (Unit: mm)
Installation precautions:
■Must be installed indoors, guarantee the gateway controller installation must be higher than the ground 50 cm;
■Install at a place where should not be affected by electromagnetic wave or dust;
■Avoid installing in a place of direct sunshine or heat source;
■Avoid installing in a place with high humidity;
■ Avoid installing in corrosive areas.
■If suspension installed, make sure put the communication termnal at the upper side.
Please install according to the above requirements, check installation environment before installation.
3.2. System framework specification
Fig.3-4
BVIM gateway controller is used for querying and controlling the air-conditioning indoor unit, and transmits the status information of indoor unit to the computer and transmits the
controlling and querying orders sent by the computer to the indoor unit.
1) BVIM gateway controller indication instructions
LED indication
lamp
Main power
terminal
Power ON/OFF switch
B-net terminal
I/O terminal
LAN terminal
Console terminal
Fig.3-5
BVIM gateway has 8 B-net terminals, 1 LAN terminal, 8 B-net terminal indication lamps, 4 status display lamps (Power, Status, Alarm, and Modem) and power switch.
Connect to the central air-conditioning system through the B-net terminal, and connect the local area network or Internet network through LAN terminal. Computer or
other similar devices can visit BVIM WEB through browser and the local or remote control the devices.
4
5.5
R3.5
Fig.3-3
CLIMATE 5000 VRF 6 720 862 466 (2017/05)
BVIM GATEWAY CONTROLLER INSTRUCTIONS |5
NOTE
■Install the gateway at a side of B-net communicating bus, do not install it in the middle of the bus.
■Use 3-core shielding wire with 0.7mm2~1.0mm2 for wiring, details please refers to professionals.
2) Terminal figure
LAN terminal
Console terminal
I/O terminal
Fig.3-6
3) LED indication lamp instructions
Table.3-1
Indication lamp Color Indication lamp instructions
TX1~TX8 Yellow No.1-8 sending terminals indication lamp
RX1~RX8 Green No.1-8 receiving terminals indication lamp
Power Red Power indication lamp
Status Green Status indication lamp
Alarm Yellow Alarm indication lamp
Modem Green Reserve indication lamp
LED status:
■Under normal situation, Status lamp will flash with 1HZ frequency, and Alarm lamp will be off;
■Under error situation, Status lamp will flash with 1HZ frequency, and Alarm lamp will flash with 1HZ frequency.
4) Specification parameters of BVIM gateway controller
Table.3-2
Power specification Voltage range Single phase AC 100~240V, 50/60 Hz
Consumed power Max.15W
Using conditions
Voltage fluctuation Rated value ±10%
Ambient temp. -10~50°C
Ambient humidity 0~95%
Storage temp. -20~60°C
Capacity Insulated resistance When it is DC 500VM, it will over 50MQ
Weight 4.4kg
Colour of the cover Milky white
XYE
K1K2E
6 | BVIM GATEWAY CONTROLLER INSTRUCTIONS
6 720 862 466 (2017/05) CLIMATE 5000 VRF
5) Definitions for code switch as follow
Table.3-3
Gateway controller On Off (Factory state)
ON
SW1-1 No power consumption function power consumption function
SW1-2 Dial code setting IP WEB setting IP
OFF
SW1-3 Manual topology Auto topology
SW1-4 Reserve
Note: Dial Code requires setting before powering on. Take off the cover to do this.
6) Button battery installation
Fig.3-7 Fig.3-8
NOTE
After adjusting the dial switch, ensure you install the battery provided in your pack. 5.2 Time setting.
7) IO terminal
Table.3-4
Gateway controller Base pin name Function definition
Pin1
1 2 3
Gateway controller error output;
Pin2
When the device operates normally, break off Pin1
and Pin2, close Pin2 and Pin3; when it is error, close
Pin1 and Pin2, break off Pin2 and Pin3.
Pin3 When it’s powered off, the device still output error.
Pin4 IN1 IN2 E
4 5 6
Emergency stop signal, this signal is input signal,
and if this signal is high-level (12~36VDC), then
means emergency stop; if this signal is low-level
(0~0.7VDC), then means normal.
Pin5 Reserve function
Pin6 Ground wire with emergency signal
8) Uninterruptible power supply (UPS BK650-CH optional)
Table.3-5
Requirements Performance
Capacity 650 VA/400 Watt
Voltage 220V±8%(Battery)
Control signal 50Hz±1Hz(Battery)
Note: When cut off the power please completely close the computer.
CLIMATE 5000 VRF 6 720 862 466 (2017/05)
BVIM GATEWAY CONTROLLER INSTRUCTIONS |7
4. SYSTEM INTRODUCTION
BVIM is a Central Air-conditioning multi-connected devices’ gateway which based on WEB, is an important part of Intelligent Manager system. Connect to Central
Air-conditioning devices through the B-net terminal. Allows you to connect multiple systems through the B net connector (B-net connector is XYE communication
terminals and K1K2E communication terminals); under the auto topology mode, it can connect 4 refrigerant systems at once (can insert 256 sets indoor units and 16
sets outdoor units); under the manual topology mode, it can connect16 refrigerant systems at once (can insert 256 sets indoor units and 64 sets outdoor units). The
operation methods of auto topology and manual topology please refer to Technical Manual. The appearance interface of BVIM gateway as follow displays:
4.1. BVIM Network
1) BVIM gateway can connect the local area network or Internet network through LAN terminal. BVIM network topology as follows Fig 4-1.
2) B-net terminals are listed in two rows, 1-4 are XYE terminals, 5-8 are K1K2E terminals. Computer or other similar devices can visit BVIM WEB through browser, and
then local or remote control the devices.
Fig.4-1
4.2. Models which could be inserted
1) Can freely insert all VRF models.
2) If mini VRF outdoor units are connected to BVIM, a separate power supply will be required.
3) Details refer to Technical Manual.
4.3. Base on WEB technology
BVIM is a gateway based on WEB technology, unrelated to computer or similar devices operation systems. BVIM insert into network then can browse the WEB page
through the browser of system platform, we suggest using IE (9.0 or above), Firefox (11.0 or above), Chrome (18.0 or above) or Safari (5.1 or above).
4.4. Local network connection
BVIM gateway can connect to the LAN network through switch. IP address of computer or similar devices must in the same subnet area as the IP address of BVIM
gateway.
4.4.1. IP configuration
Default IP of gateway is 192.168.100.40, subnet cover code is 255.255.255.0. IP address of computer or similar devices should manual configure the statistic IP and
within the range of 192.168.100, subnet cover code should be 255.255.255.0. If the computer only has the BVIM network, then use the way of configuring single IP;
if the computer also has the local network beside BVIM network, then use the way of configuring several IP. Methods as follow (Take windows 7 system for example).
1) Configure single IP
Open the property dialogue box to configure the IP address and subnet cover code, for example: IP: 192.168.100.44, subnet cover code: 255.255.255.0.
8 | SYSTEM INTRODUCTION
6 720 862 466 (2017/05) CLIMATE 5000 VRF
Fig.4-2
After configuration, click the “OK” button.
2) Configure several IP
Before configuring several IP’s it needs to configure a statistic IP address, configuring steps as follow:
■Check the local IP
Open the property dialogue box, as Fig.4-2 display, if the option “Use the following IP addresses(S)” has been selected, and the interface displayed IP address,
that means the local IP is static IP address.Otherwise it is a dynamic IP address, then it needs to configure a static IP address.
■Configure static IP address
Open the “Start” menu, and type “cmd” in the search column, and display the dialogue box as follow:
Fig.4-3
Type “ipconfig” in the above figure, then the interface will display the local dynamic IP address, and it will write this IP address into the property dialogue box, and finish
the statistic IP address configuration, details please consult the local network administrator.
After the static IP address configuration is complete, open the property dialogue box again, select the “Advanced”, and display the TCP/IP setting dialogue box as
follow:
CLIMATE 5000 VRF 6 720 862 466 (2017/05)
SYSTEM INTRODUCTION |9
Fig.4-4
Click the “ADD” button under IP address column, and add a IP address with the same network segment of “192.168.100.40”, such as IP: 192.168.100.101, sub
network cover code: 255.255.255.0, and click “OK” button.
4.4.2. Local LAN access
If there is a computer or other similar device of same subnet area as BVIM in LAN, then type the link address of BVIM gateway (e.g.: http://192.168.100.40) on the
browser address bar can visit the BVIM WEB interface to operate the air-conditioning device. The local visit topology structure as follow display:
Fig.4-5
4.5. Remote network connection
Under the following situation, BVIM gateway can set in the office network; the user can operate the air-conditioning device through the computer or similar devices.
VPN:
Only VPN use is allowed to access from internet.
■Router establishing
BVIM gateway might use a same public IP address with other devices, under the situation of network cannot send terminal mapping to BVIM gateway, and then can
use VPN for visiting. As the figure displayed, VPN tunnels establish between routers, and then can visit WEB interface through VPN tunnels. VPN Server can be
established by oneself also can be rented.
Fig.4-6
Its topology structure as follow display:
10 | SYSTEM INTRODUCTION
6 720 862 466 (2017/05) CLIMATE 5000 VRF
Other manuals for CLIMATE 5000 VRF RDCI Series
11
Table of contents
Other Bosch Controllers manuals
Bosch
Bosch ARC C-2 User manual
Bosch
Bosch CR 400 User manual
Bosch
Bosch Smart Home Controller AA User manual
Bosch
Bosch AMC-4W User manual
Bosch
Bosch DSA E Series User manual
Bosch
Bosch CS 550 User manual
Bosch
Bosch Rexroth IndraDrive C HCS03.1 Technical manual
Bosch
Bosch FHP560 Instructions for use
Bosch
Bosch EasyControl CT200 User manual
Bosch
Bosch Smart Home controller II Operator's manual
Bosch
Bosch Rexroth GTM Series Technical manual
Bosch
Bosch AMC2 Series User manual
Bosch
Bosch Rexroth CS660 Use and care manual
Bosch
Bosch rexroth CS610 User manual
Bosch
Bosch Rexroth KMS02 User manual
Bosch
Bosch REXROTH SB356 User manual
Bosch
Bosch AMC2-16IOE User manual
Bosch
Bosch REXROTH IndraMotion MLD User manual
Bosch
Bosch REG 73-1 User manual
Bosch
Bosch Rexroth Rho 4.0 User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
