Avtech AVN2503 Operation instructions
AVN2503
Wireless Network Camera
Tutorial
Prerequisites
Before using the camera, make sure the following items are ready:
Network camera (no microSD card)
DC12V adapter
Router
Mobile phone / tablet
(Optional) PC / laptop
(Optional) Recorder
And also check and write down the mac address of your camera:
System Diagram
There are four system diagrams suitable for four scenarios for you to build your own
surveillance system with this camera:
Diagram 1
I’m installing this camera to simply see my pet or properties at home when I’m away and I
do not need to keep video footage for later checking.
(This camera itself is only able to save up to 40 seconds of event footage.)
Diagram 2
I need video recording and I have a redundant PC / laptop which can operate continuously
Diagram 3
I need long time video recording and it’s easy to do re-cabling at my home
Diagram 4
I need long time video recording and it’s not easy to do re-cabling at my home; the wireless
support is preferable.
Diagram 1 (Wireless) camera + router + mobile phone / tablet
Recommended installation steps: software setup hardware installation
Diagram 4 (Wireless) camera + router + NVR + mobile phone / tablet
Recommended installation steps: software setup hardware installation & setup
Software Setup
Go to Google Play or App Store to search and download the app, EagleEyes, and follow the
instructions below based on the system diagram you’re using.
Diagram 1 (Wireless) camera + router + mobile phone / tablet
Step1: Power on your camera and wait for the LED status indicator to start flashing.
Step2: Install EagleEyes on your mobile phone / tablet.
Step3: Instead of using your mobile network (such as 4G / 5G network), please connect
your mobile phone / tablet to your wireless network first.
Then, open EagleEyes and click + (Add) to add a device. (
Figure 1
)
Step4: Select EaZy (
Figure 2
).
Step5: Select Wireless IP Camera (
Figure 3
).
Figure 1
Figure 2
Figure 3
Video demo for Step3 ~ Step5
Diagram 2 (Wireless) camera + router + PC (CMS Lite) + mobile phone / tablet
Step1: Power on your camera and wait for the LED status indicator to start flashing.
Step2: Install EagleEyes on your mobile phone / tablet.
Step3: Instead of using your mobile network (such as 4G / 5G network), please connect
your mobile phone / tablet to your wireless network first.
Then, open EagleEyes and click + (Add) to add a device. (
Figure 1
)
Step4: Select EaZy (
Figure 2
).
Step5: Select Wireless IP Camera (
Figure 3
).
Figure 1
Figure 2
Figure 3
Diagram 3 (Wired) camera + router + NVR + mobile phone / tablet
Step1: Power on the camera.
Step2: Check & write down the mac address of your camera.
Step3: Search and add the camera to the NVR (takeAVTECH NVR as an example).
Video demo:
Step4: When the camera is added successfully, you’ll be able to see the camera images.
Diagram 4 (Wireless) camera + router + NVR + mobile phone / tablet
Step1: Power on your camera and wait for the LED status indicator to start flashing.
Step2: Install EagleEyes on your mobile phone / tablet.
Step3: Instead of using your mobile network (such as 4G / 5G network), please connect
your mobile phone / tablet to your wireless network first.
Then, open EagleEyes and click + (Add) to add a device. (
Figure 1
)
Table of contents
Other Avtech IP Camera manuals
Avtech
Avtech DG205X User manual
Avtech
Avtech AVM457A User manual
Avtech
Avtech KPC172 User manual
Avtech
Avtech AVC647 User manual
Avtech
Avtech AVM328ZBP User guide
Avtech
Avtech AVM457A User manual
Avtech
Avtech AVN801 Troubleshooting guide
Avtech
Avtech DG-105A User manual
Avtech
Avtech AVM317A User manual
Avtech
Avtech DGM1304 User manual
