Avtech AVM317A User manual
AV TECH CORPORATION
AVM317A Maintenance Manual
V0.1
2014.05.15
Apparatus: Multimeter
A. Check if the power of the main board is abnormal.
Step1: Measure if the components of AM317AM, PQ1 S-pin and D-Pin, is 5V.
State: Yes, go to step 2.
No, change the component PQ1.
Step2: Measure the both ends of the component D2 of AM317AM is 5V.
State: Yes, go to step 3.
No, change the component D2. Please send it back to RMA if the voltage isn’t 5V
after changing.
Step3: Measure the component U12 Pin1 of AM317BM if the voltage is 5V.
State: Yes, go to step4.
No, change the component U12. Please send it back to RMA if the voltage isn’t 5V
after changing.
Step4: Measure the component U11 Pin7 of AM317AM if the voltage is 3.8V.
State: Yes, go to step5.
No, change the component U11. Please send it back to RMA if the voltage isn’t
3.8V after changing.
Step5: Measure the both ends of the component L2 of AM317AM if the voltage is 3.8V.
State: Yes, go to step6.
No, change the component L2. Please send it back to RMA if the voltage isn’t 3.8V
after changing.
Step6: Measure the component U20 Pin1 of AM317AM if the voltage is 1.8V.
State: Yes, go to step7.
No, change the component U20. Please sent it back to RMA if the voltage isn’t
1.8V after changing.
Step7: Measure the component IC1 Pin2 of AM317BM if the voltage is 3.3V.
State: Yes, go to step8.
No, change the component IC1. Please sent it back to RMA if the voltage isn’t
3.3V after changing.
Step8: Measure the component U13 Pin3 of AM317BM if the voltage is 1V.
State: Yes, go to step9.
No, change the component U13. Please send it back to RMA if the voltage isn’t 1V
after changing.
B. Video Loss
Step1: Measure the component U2 Pin5 of AM317BS if the voltage is 1.2.
State: Yes, go to step2.
No, change the component U2. Please sent it back to RMA if the voltage isn’t
1.2V after changing.
Step2: Measure the component U3 Pin5 of AM317BS if the voltage is 2.7V.
State: Yes, go to step3.
No, change the component U3. Please send it back to RMA if the voltage isn’t
2.7V after changing.
Step3: Measure the component U4 Pin5 of AM317BS if the voltage is 1.8V.
State: Yes, go to step3.
No, change the component U4. Please send it back to RMA if the voltage isn’t
1.8V after changing.
Part Number of the Components:
Main board
Location Part Number Part Name
PQ1 PQAM2321PSO2
3
PAM2321P-T1-PF(SOT23)
D2 PDSCD34HSC-0
0
PSCD34H(SMA)
U12 PUAT120CD-110
PAT120CD-2.9KDR(SOT23)
U11 PUAT1526P1220
PAT1526P11U(SOP8)
L2 PL2U2/3020-0S PCHOKE 2.2uH SMD(3020)<O173>
U20 PUS1131B18150
PS-1131B18UA-N4DTFG(SOT-89)
IC1 PUTJ3940S-5A0 PTJ3940S-3.3V(SOT223)
U13 PUG5725ADJ120
PG5725ADJT11U(SOT23-5)
Sensor board
Location Part Number Part Name
U2 PUAT5231120C0
PAT5231-1.2KE(SOT25) 1.2V
U3 PUAT5231270C0
PAT5231-2.7KER(SOT25) 2.7V
U4 PUS1131B18150
PS-1131B18UA-N4DTFG(SOT-89)
Table of contents
Other Avtech IP Camera manuals
Avtech
Avtech AVN80X Troubleshooting guide
Avtech
Avtech AVM457A User manual
Avtech
Avtech AVC492A User manual
Avtech
Avtech AVN801 Troubleshooting guide
Avtech
Avtech KPC172 User manual
Avtech
Avtech AVC467A User manual
Avtech
Avtech IR CAMERA User manual
Avtech
Avtech AVM328ZBP User guide
Avtech
Avtech AVC647 User manual
Avtech
Avtech AVM457A User manual
