ATI Technologies Scorpion X2 User manual

Scorpion X2 Pad

Part # A.5.10.1015

-Installation Instructions-

Thank you for purchasing an ATI product!

Buttpad Installation

Point the shotgun in a safe direction and place the safety in the "on" position. Next pull back the

slide, and carefully inspect the chamber to be sure the shotgun is unloaded.

www. ATIgunstocks.com Page 1

Step #1

Cut out the buttpad template below.

Note: If your ATI buttstock already has pre-drilled

holes for buttpad installation, skip to step #7.

Step #2

Pull down the latch lever and slide the ATI buttstock away

from the buffer tube.

Figure 1

Step #3

Place the buttpad template onto the buttstock and

secure the template to the buttstock with tape.

NOTE: Make sure the paper template is aligned

perfectly with the outside profile of the

buttstock. If the template is not aligned correctly,

the buttpad will not correctly assemble to the

stock.

Figure 2

Figure 3

Scorpion X2 Pad

Part # A.5.10.1015

-Installation Instructions-

Thank you for purchasing an ATI product!

Buttpad Installation

Step #4

With the template secured to the buttstock, use a

1/4" drill bit to drill 2 straight holes on each side of

the buttstock. Use the designated "X" in circles on

the template as markers for these 2 holes.

NOTE: ATI is NOT responsible for broken drill bits

Figure 4

Step #5

Using the circle on the template and the same 1/4"

drill bit, drill the single hole on the bottom of the

buttstock 1/8" deep.

NOTE: This hole will not be drilled through, you

must only drill 1/8" into the buttstock. The best

way to drill 1/8" is to measure 1/8" from the edge

of the drill bit and then place tape at the 1/8"

mark so you don't drill any deeper.

1/8"

Figure 5A

Figure 5B

Step #6

Remove the buttpad template and clean the

buttstock of any burrs and drilling material.

Figure 6

Step #7

Place the buttpad on the rear of the buttstock and

using a T-20 torx driver, install the (2) 8 x 48-2 x 1/2"

plastite torx head screws until snug.

Page 2

Figure 7

This manual suits for next models

Other ATI Technologies Measuring Instrument manuals

ATI Technologies

ATI Technologies Q45D User manual

ATI Technologies

ATI Technologies Q46H/79PR User manual

ATI Technologies

ATI Technologies TDA-110P Manual

ATI Technologies

ATI Technologies Q46P User manual

ATI Technologies

ATI Technologies Q45P User manual

ATI Technologies

ATI Technologies Q45S/87 User manual

ATI Technologies

ATI Technologies 39-0062 User manual

ATI Technologies

ATI Technologies Q46 Series Use and care manual

ATI Technologies

ATI Technologies Q-Card Specification sheet

ATI Technologies

ATI Technologies C12-17 User manual

ATI Technologies

ATI Technologies 2i User manual

ATI Technologies

ATI Technologies PQ45H User manual

ATI Technologies

ATI Technologies SmartTachSmartTach User manual

ATI Technologies

ATI Technologies Q46 Series Use and care manual

ATI Technologies

ATI Technologies Q45R User manual

ATI Technologies

ATI Technologies PQ45P User manual

ATI Technologies

ATI Technologies 39-0080 User manual

ATI Technologies

ATI Technologies Q46 Series User manual

ATI Technologies

ATI Technologies Metrinet User manual

ATI Technologies

ATI Technologies Q46/88 User manual

ATI Technologies

ATI Technologies 2i User manual

ATI Technologies

ATI Technologies Q-Blast Q46D User manual

ATI Technologies

ATI Technologies 2H User manual

ATI Technologies

ATI Technologies Q46UV User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual