ATI Technologies 39-0215 User manual

ATL HDX Active Sync Manual

Version - 1.1

Date - October 2017

Part Number - 39-0215

Innovation In and

Out of Parlour

Good Practice 2

ATL V2.00 HDX Reader Synchronisation Connections: 3

ATL V3.00 HDX Reader Synchronisation Connections: 4

GOOD PRACTICE: Control, Power and Data Cables and Conduit.

Cables must be kept as short as possible running directly from point to point. Cut out any

excess cable rather than leaving it coiled.

Where ever possible cables should be contained in a waterproof conduit using the correct

csa cable specified in the diagrams.

Entries must be made into the bottom of power supply or control casings but never into the

top. This will invalidate the warranty.

Strip existing cables back to bright copper before connection.

Keep multicore cables away from other cables especially those carrying mains or heavy

currents. Cross only at 90 where necessary and do not enclose in conduit with other cables.

Keep feeder cables and coaxial cables in separate conduits.

Make sure diodes are fitted to all feeders, pulsators and solenoid valve. These should be

fitted as close as possible to feeder motor or solenoid coil.

INDEX

The ATL HDX Reader

The ATL HDX reader can be found in all ATL products which use automatic identification. Examples are parlour auto-id systems, Pegasus sorting gate systems and out of parlour feeding systems.

If an ATL HDX reader and a non-HDX reader are in close proximity, they may interfere with one another and adversely affect performance. In order to overcome this, the readers need to be

synchronised together. This can be achieved by using the Active Sync and connecting into the synchronisation port as shown in the diagram below.

Innovation In and Out of Parlour

2 | ATL HDX Active Sync Manual | v1.1

ATL V2.00 HDX Reader Synchronisation to Non-ATL HDX Reader

WARNING: DO NOT RUN TWISTED PAIR

DATA CABLE NEXT TO MAINS CABLES OR

CABLES CARRYING HIGH CURRENT AS

WILL CAUSE INTERFERENCE AND SYSTEM

WILL NOT FUNCTION CORRECTLY.

V2.00.03

16-12-08

+12v In

Out

Active Sync Unit

+0V In

Master / Slave Jumper Settings

= Master

= Slave

Master / Slave Jumper

*see below

Sync Port

Ground

+12v

The jumper should be set to slave to synchronise.

Place Active Sync PCB in close proximity to

the non-ATL HDX reader antenna.

Innovation In and Out of Parlour

3 | ATL HDX Active Sync Manual | v1.1

ATL V3.00 HDX Reader Synchronisation to Non-ATL HDX Reader

WARNING: DO NOT RUN TWISTED PAIR

DATA CABLE NEXT TO MAINS CABLES OR

CABLES CARRYING HIGH CURRENT AS

WILL CAUSE INTERFERENCE AND SYSTEM

WILL NOT FUNCTION CORRECTLY.

V3.02

+12v In

Out

Active Sync Unit

+0V In

Master / Slave Switch (Switch 1)

Set to ON to synchronise

Sync Input Pin

Ground

+12v

Place Active Sync PCB in close proximity to

the non-ATL HDX reader antenna.

Innovation In and Out of Parlour

4 | ATL HDX Active Sync Manual | v1.1

1 2 3 4

Table of contents

Other ATI Technologies Measuring Instrument manuals

ATI Technologies

ATI Technologies 2i User manual

ATI Technologies

ATI Technologies Q-Blast Q46D User manual

ATI Technologies

ATI Technologies Q46/88 User manual

ATI Technologies

ATI Technologies PQ45P User manual

ATI Technologies

ATI Technologies 39-0050 Guide

ATI Technologies

ATI Technologies A15/82 User manual

ATI Technologies

ATI Technologies Q46H/65 User manual

ATI Technologies

ATI Technologies Q46F/82 User manual

ATI Technologies

ATI Technologies Scorpion X2 User manual

ATI Technologies

ATI Technologies Q46P User manual

ATI Technologies

ATI Technologies Q45P User manual

ATI Technologies

ATI Technologies 39-0062 User manual

ATI Technologies

ATI Technologies Q46 Series Use and care manual

ATI Technologies

ATI Technologies TDA-110P Manual

ATI Technologies

ATI Technologies Q45S/87 User manual

ATI Technologies

ATI Technologies 2H User manual

ATI Technologies

ATI Technologies Q46UV User manual

ATI Technologies

ATI Technologies Q45D User manual

ATI Technologies

ATI Technologies Q45CT User manual

ATI Technologies

ATI Technologies Q45S/87 User manual

ATI Technologies

ATI Technologies C12-17 User manual

ATI Technologies

ATI Technologies SmartTachSmartTach User manual

ATI Technologies

ATI Technologies Q45D User manual

ATI Technologies

ATI Technologies PQ45H User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual