Apera Instruments LabSen 853-H User manual

LabSen® 853-H pH/Temperature Electrode for

Strong Alkaline and Viscous Solutions

User Manual

LabSen® pH electrodes are made with proprietary sensor technologies and key components from

Switzerland. LabSen® 853-H pH/Temperature Electrode is designed for high-accuracy pH measurement

of strong alkaline and highly viscous solutions.

Features

•The sturdy HA membrane is made for strong alkaline and high temperature solutions.

•The pre-pressurized structure allows the electrolyte to stably flow out even in highly viscous

samples so as to ensure reliable measurements.

•Blue gel inner solution - does not flow and will not generate air bubbles.

Technical Specifications

Measuring Range

0-14 pH

Temperature Range

0-130°C

Body Material

Lead-free Glass

Reference

Pre-pressurized Silver ion trap

Junction

Ceramic

Membrane Type

Temperature Sensor

NTC 30KΩ

Membrane Resistance

<500MΩ

Reference Solution

Gel KCL

Soaking Solution

3M KCL

Electrode Dimension

Ø12×120 mm

Connector

BNC/RCA

Cable

Ø5mm×1m

How to use

1. Connect the electrode to the BNC connector of your pH meter.

2. Insert the black RCA connector of the electrode to the RCA socket directly.

3. Before measuring, twist off the storage bottle cap (see graph on the right),

pull out the electrode and rinse it off with distilled or deionized water.

4. Perform at least a two-point calibration before measuring after connecting the

new electrode to your pH meter.

5. After using, put the electrode back into the storage bottle and twist on the

bottle cap.

Maintenance

1. When not in use, the electrode should be soaked in the storage bottle containing 3M KCL soaking

solution to keep the glass membrane and junction in a healthy condition. Clean the bottle and replace

the soaking solution if it gets contaminated. The electrode should never be stored in pure water such

as deionized or distilled water.

2. The electrode is only as accurate as it is clean. Always thoroughly rinse off the probe before and after

each measurement with pure water in a container or with a wash bottle.

3. For tough contaminants, soak the electrode in Apera cleaning solution (AI1166) for 30 minutes. Then

use a soft brush to remove the contaminants. Afterwards, soak the electrode in 3M KCL soaking

solution for at least 1 hour. Rinse it off, then re-calibrate it before using again.

4. The connector of the electrode should be kept clean and dry. If contaminated, please clean it with

medical cotton and isopropyl alcohol and blow-dry it to prevent short circuit of the electrode or slow

response of the electrode.

5. The electrode should avoid testing strong acid as well as dehydrating media such as absolute ethanol

and concentrated sulfuric acid. If testing such solutions, the immersion time should be minimized and

the electrode should be carefully cleaned after use.

6. Every pH electrode will eventually age and fail. The typical service life of Apera pH electrodes is 12-

24 months depending on the frequency of usage and how well you keep it clean and properly stored.

We recommend replacing your electrode every 12-18 months to ensure the best accuracy.

Warranty

We warrant this electrode to be free from defects in material and workmanship and agree to repair or

replace free of charge, at option of APERA INSTRUMENTS (Europe) GmbH, any malfunctioned or

damaged product attributable to responsibility of APERA INSTRUMENTS (Europe) GmbH for a period of

six months from delivery. Warranty period is the time limit to provide free service for the products

purchased by customers, not the service life of the tester or electrodes.

This limited warranty does not cover any damages due to:

Transportation; storage; improper use; failure to follow the product instructions or to perform any

preventive maintenance; modifications; combination or use with any products, materials, processes,

systems, or other matter not provided or authorized in writing by us; unauthorized repair; normal wear

and tear; or external causes such as accidents, abuse, or other actions or events beyond our reasonable

control.

APERA INSTRUMENTS (Europe) GmbH

Address: Wilhelm-Muthmann-Str. 18

42329 Wuppertal, Germany

Tel.: +49 202 51988998

Website: aperainst.de

Email: info@aperainst.de

Table of contents

Other Apera Instruments Measuring Instrument manuals

Apera Instruments

Apera Instruments PC60 User manual

Apera Instruments

Apera Instruments LabSen 861 User manual

Apera Instruments

Apera Instruments 950 Series User manual

Apera Instruments

Apera Instruments SX736 User manual

Apera Instruments

Apera Instruments 2301T-S User manual

Apera Instruments

Apera Instruments LabSen 823 User manual

Apera Instruments

Apera Instruments 800 Series User manual

Apera Instruments

Apera Instruments EC700 User manual

Apera Instruments

Apera Instruments WS200 User manual

Apera Instruments

Apera Instruments PH910 User manual

Apera Instruments

Apera Instruments 2310T-F User manual

Apera Instruments

Apera Instruments WS100 User manual

Apera Instruments

Apera Instruments LabSen 851-1 User manual

Apera Instruments

Apera Instruments MP511 User manual

Apera Instruments

Apera Instruments Gro Star AI102G User manual

Apera Instruments

Apera Instruments SX725 User manual

Apera Instruments

Apera Instruments LabSen 801 User manual

Apera Instruments

Apera Instruments YD300 User manual

Apera Instruments

Apera Instruments 9500 Premium Series User manual

Apera Instruments

Apera Instruments 2401T-F User manual

Apera Instruments

Apera Instruments PH 8500 User manual

Apera Instruments

Apera Instruments YD300 User manual

Apera Instruments

Apera Instruments PHB-3 User manual

Apera Instruments

Apera Instruments LabSen 803 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual