Agilent Technologies B2901 User manual

Agilent B2901/02/11/12A Precision Source/Measure Unit

How to source continuous pulses without any measurement

This material shows how to setup the instrument to source continuous pulses without any measurement using the

B2901/02/11/12A, through example to source 2 V continuous pulses with the timing parameters such as 300 us pulse

delay, 200 us pulse width and 500 us source trigger period.

Figure 1 shows the timing chart for the continuous pulse source.

Figure 1. Timing chart for the continuous pulse source

It is required to abort the instrument when you’d like to stop sourcing continuous pulses.

This material also shows how to abort the instrument to stop continuous pulses.

Setting up the pulse condition

Step 1. Press to edit the source function, and then select to set the source function to the voltage

source.

TIMER TriggerOutput ON

Source Value

Output

Off State

V or I

Time

TPD TPW

Pulse

Peak Value

TPD TPW TPD TPW

TSP TSP TSP

TPW : Pulse WidthTPD : Pulse Delay TSP : Source Trigger Period

(1) Press Mode (2) Press VOLTS (V)

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 2. Press to edit the source value, and then enter 0 V to set the source value to 0 V.

Step 3. Press to edit the limit value, and then enter 10 mA to set the limit value to 10 mA.

Step 4. Press to change the keys shown in Assist keys, and then press to show Pulse Sub-Panel.

Step 5. Press , then press to set the pulse source ON. After turning on the pulse source, you can

see Source Shape which shows the pulse source mode.

(1) Press Source (2) Enter Source Value

(1) Press Limit (2) Enter Limit Value

(1) Press Show Pulse (2) Pulse Sub-Panel appears

(1) Press ON Source Shape

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 6. Rotate to select Channel 1 Pulse Parameters and set them up as below.

(Peak: 2 V, Delay: 300 us, Width: 200 us)

Step 7. Press to show Trigger Sub-Panel.

Step 8. Press to edit the trigger type, and then select to set the trigger type to MANUAL.

(1) Press Show Trigger (2) Trigger Sub-Panel appears

(2) Press MANUAL(1) Press

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 9. Rotate to select the source trigger period and press to edit it. Then enter 500 us to set the

source trigger period to 500 us.

Step 10. Rotate to select the source trigger source and press to edit it. Then press to set

the source trigger source to TIMER.

Step 11. If you aren’t on the top of the Function menu, press repeatedly to return to the top level.

Step 12. Press and then press to open Trigger Configuration dialogue.

(2) Enter Source Trigger Period(1) Rotate and press

Source Trigger Period

to edit

(2) Press TIMER(1) Rotate and press

Source Trigger Source

to edit

On the top level of the Function menu

In the middle level of the Function menu

Any tree structure can’t be seen

Some tree structure can be seen

(1) Press Trigger

(2) Press Config

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 13. Press and select to specify the layer, the trigger parameters of which are configured.

Step 14. Rotate to select the arm count and press to edit it. Then press to set the arm

count to INFINITY.

Step 15. Press to make the modification effective.

(2) Press ARM(1) Press

(2) Press INF.

(1) Rotate and press

ARM Count

to edit

(1) Press OK to make the modification effective

Agilent B2901/02/11/12A Precision Source/Measure Unit

Starting sourcing the continuous pulses

Step 16. If you aren’t on the top of the Function menu, press repeatedly to return to the top level.

Step 17. Press , , , and then press to start sourcing the

continuous pulses.

On the top level of the Function menu

In the middle level of the Function menu

Any tree structure can’t be seen

Some tree structure can be seen

(1) Press Trigger

(2) Press Initiate

(3) Press Trans.

(4) Press Ch 1

Agilent B2901/02/11/12A Precision Source/Measure Unit

Stopping sourcing the continuous pulses

Step 18. If you aren’t on the top of the Function menu, press repeatedly to return to the top level.

Step 19. Press , , , and then press to stop sourcing the

continuous pulses.

On the top level of the Function menu

In the middle level of the Function menu

Any tree structure can’t be seen

Some tree structure can be seen

(1) Press Trigger

(2) Press Abort

(3) Press Trans.

(4) Press Ch 1

Other manuals for B2901

This manual suits for next models

Other Agilent Technologies Measuring Instrument manuals

Agilent Technologies

Agilent Technologies 7820A User guide

Agilent Technologies

Agilent Technologies 8720E Series User manual

Agilent Technologies

Agilent Technologies N1911A User manual

Agilent Technologies

Agilent Technologies 4339B User manual

Agilent Technologies

Agilent Technologies FieldFox MW N9913A User manual

Agilent Technologies

Agilent Technologies 8719D User manual

Agilent Technologies

Agilent Technologies 16753A User manual

Agilent Technologies

Agilent Technologies OmniBER 718 SDH User manual

Agilent Technologies

Agilent Technologies 437B User manual

Agilent Technologies

Agilent Technologies E5062A ENA-L Series Quick start guide

Agilent Technologies

Agilent Technologies PSA Series Installation and operation manual

Agilent Technologies

Agilent Technologies 8753ES User manual

Agilent Technologies

Agilent Technologies ESA-E Series User manual

Agilent Technologies

Agilent Technologies U1731A User manual

Agilent Technologies

Agilent Technologies 16900 Series User manual

Agilent Technologies

Agilent Technologies U1731C User manual

Agilent Technologies

Agilent Technologies E2730A User manual

Agilent Technologies

Agilent Technologies 86120C User manual

Agilent Technologies

Agilent Technologies E5072A User manual

Agilent Technologies

Agilent Technologies 4339B User manual

Agilent Technologies

Agilent Technologies N4906B Serial BERT User manual

Agilent Technologies

Agilent Technologies ICP-MS Series Operating instructions

Agilent Technologies

Agilent Technologies N4376B User manual

Agilent Technologies

Agilent Technologies N5230A User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual