Agilent Technologies 4339B User manual

Agilent 4339B High Resistance Meter

Service Manual

SERIAL NUMBERS

This manual applies directly to instruments with serial number prex JP1KD

or additional important information about serial numbers, read

\Instruments Covered by This Manual" in Chapter 1of

this manual.

Agilent Part No. 04339-90043

Printed in JAPAN March 2001

Fourth Edition

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies.

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan



Manual Printing History

ugust 1996

::::::::::::

::::::::::::::: :: ::::

::::::::::::::: :: :: :: ::::

First Edition

July 1999

:::::::::::::

::::::::::::::::: :: :: ::

Second Edition (part number: 04339-90043)

June 2000

:::::::::

:::: :: :: :: :::::::::::::

Third Edition (part number: 04339-90043)

March 2001

:::::::::::

:::: :: :::::::::::::::::::

Fourth Edition (part number: 04339-90043)

iii

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service

,and repair of this instrument. F

ailure to comply with these precautions or with specic

ARNINGS

elsewhere in this manual may impair the protection provided by the equipment.

In addition it violates safety standards of design, manufacture, and intended use of the

instrument.

The A

gilent T

echnologies assumes no liability for the customer's failure to comply with these

requirements

Note

4339B is designed for use in INST

ALLA

TION CA

TEGORY II according to IEC

61010-1 and POLLUTION DEGREE 1according to IEC 61010-1 and IEC 60664-1.

4339B is an INDOOR USE product.

Note

LEDs in 4339B are Class 1in accordance with IEC60825-1.

CLASS 1LED PRODUCT

Ground The Instrument

To avoid electric shock hazard, the instrument chassis and cabinet must be connected to a

safety earth ground by the supplied power cable with earth blade

DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of ammable gasses or fumes

.Operation of any

electrical instrument in such an environment constitutes adenite safety hazard.

Keep Away From Live Circuits

Operating personnel must not remove instrument covers

.Component replacement and internal

adjustments must be made by qualied maintenance personnel. Do not replace components

with the power cable connected. Under certain conditions

,dangerous voltages may exist even

with the power cable removed. T

oavoid injuries

,always disconnect power and discharge

circuits before touching them.

DO NOT Service Or A

djust Alone

Do not attempt internal service or adjustment unless another person, capable of rendering rst

aid and resuscitation, is present.

DO NOT Substitute P

arts Or Modify Instrument

Because of the danger of introducing additional hazards

, do not install substitute parts or

perform unauthorized modications to the instrument. Return the instrument to a Agilent

echnologies Sales and Service Oce for service and repair to ensure that safety features are

maintained.

Dangerous Procedure W

arnings

,such as the example below

,precede potentially dangerous procedures throughout

this manual. Instructions contained in the warnings must be followed.

arning

Dangerous voltages

, capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

Certication

Agilent T

echnologies certies that this product met its published specications at the time

of shipment from the factory

.Agilent T

echnologies further certies that its calibration

measurements are traceable to the United States National Institute of Standards and

echnology

,to the extent allowed by the Institution's calibration facility

,orto the calibration

facilities of other International Standards Organization members.

arranty

This Agilent T

echnologies instrument product is warranted against defects in material and

workmanship for aperiod of one year from the date of shipment, except that in the case of

certain components listed in

General Information

of this manual, the warranty shall be for the

specied period. During the warranty period, Agilent Technologies will, at its option, either

repair or replace products that prove to be defective

or warranty service or repair

,this product must be returned to aservice facility designated by

Agilent Technologies

.Buyer

shall prepay shipping charges to Agilent T

echnologies and Agilent

echnologies shall pay shipping charges to return the product to Buyer

.However

,Buyer shall

pay all shipping charges

,duties

,and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by Agilent

echnologies for use with an instrument will execute its programming instruction when

property installed on that instrument. Agilent T

echnologies does not warrant that the operation

of the instrument, or software

,or rmware will be uninterrupted or error free

Limitation Of W

arranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by Buyer

,Buyer-supplied software or interfacing, unauthorized modication or

misuse

,operation outside the environmental specications for the product, or improper site

preparation or maintenance

No other warranty is expressed or implied. A

gilent T

echnologies specically disclaims the

implied warranties of merchantability and tness for aparticular purpose

Exclusive Remedies

The remedies provided herein are buyer's sole and exclusive remedies

gilent T

echnologies

shall not be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory

Assistance

Product maintenance agreements and other customer assistance agreements are available for

Agilent T

echnologies products

or any assistance

,contact your nearest Agilent Technologies Sales and Service Oce

ddresses are provided at the back of this manual.

vii

Safety Symbols

General denitions of safety symbols used on equipment or in manuals are listed below

Instruction manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instruction manual.

Alternating current.

Direct current.

On (Supply).

O (Supply).

This

arning

sign denotes ahazard. It calls attention to a procedure, practice

condition or the like

,which, if not correctly performed or adhered to,could

result in injury or death to personnel.

This

Caution

sign denotes ahazard. It calls attention to a procedure

, practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in damage to or destruction of part or all of the product.

Note

denotes important information. It calls attention to aprocedure

practice

, condition or the like, which is essential to highlight.

Axed to product containing static sensitive devices use anti-static handling

procedures to prevent electrostatic discharge damage to component.

Caution, risk of electric shock :T

erminals which may be supplied from the

interior of the equipment at avoltage exceeding 1kV

,or allow connection to a

voltage exceeding 1kV are marked with this symbol.

viii

Documentation Map

Operation Manual

Operation Manual (Agilent P

art Number: 04339-90050 for English edition, 04339-97050 for

Japanese edition) explains specications

,basic measurement explanations

,andhow to verify

conformance to published specications

Service Manual

Service Manual (Agilent P

art Number: 04339-90043) explains how to adjust, troubleshoot, and

repair the 4339B.

How T

oUse This Manual

This is the Service Manual for the 4339B High Resistance Meter

.This manual contains

adjustments and repair information, and consists of the following four chapters

Chapter 1General Information

Chapter 1gives general information for servicing the 4339B.This chapter lists the

recommended equipment for adjustments and troubleshooting.

Chapter 2A

djustments

Chapter 2describes the adjustments

,required to ensure that the 4339B is within its published

specications after it has been repaired, or it fails the performance tests

Chapter 3Assembly Replacement

Chapter 3provides the information on replacing the 4339B assemblies. The information

includes replaceable assembly lists

,and removal and installation procedures.

Chapter 4Troubleshooting

Chapter 4provides the information on troubleshooting the 4339B.The information includes

theory of operation and information on faulty assembly isolation.

Appendix A Manual Changes

Appendix A contains manual changes and provides information for using this manual with

4339Bs manufactured before the printing date of the manual.

Appendix B Default Jumper and Switch Settings

Appendix B describes the settings of the jumpers and switches on the 4339B A2 CPU Board

Assembly. The information is required when the A2 assembly is replaced.

Other manuals for 4339B

Table of contents

Other Agilent Technologies Measuring Instrument manuals

Agilent Technologies

Agilent Technologies TS-5410 Operating instructions

Agilent Technologies

Agilent Technologies E5062A ENA-L Series Quick start guide

Agilent Technologies

Agilent Technologies 8702D User manual

Agilent Technologies

Agilent Technologies UHV-24 User manual

Agilent Technologies

Agilent Technologies E8362B User manual

Agilent Technologies

Agilent Technologies 8504B User manual

Agilent Technologies

Agilent Technologies 81950A User manual

Agilent Technologies

Agilent Technologies N5230A User manual

Agilent Technologies

Agilent Technologies ESA Series User manual

Agilent Technologies

Agilent Technologies PNA Series Installation and operation manual

Agilent Technologies

Agilent Technologies E8362A User manual

Agilent Technologies

Agilent Technologies 8712ET User manual

Agilent Technologies

Agilent Technologies E5071C User manual

Agilent Technologies

Agilent Technologies E8362C User manual

Agilent Technologies

Agilent Technologies N9320A User manual

Agilent Technologies

Agilent Technologies 490 User manual

Agilent Technologies

Agilent Technologies FieldFox N9913A User manual

Agilent Technologies

Agilent Technologies E4440A Quick start guide

Agilent Technologies

Agilent Technologies N9344C User manual

Agilent Technologies

Agilent Technologies 35670A User manual

Agilent Technologies

Agilent Technologies 4395A User manual

Agilent Technologies

Agilent Technologies N5242A User manual

Agilent Technologies

Agilent Technologies 86120C User manual

Agilent Technologies

Agilent Technologies 89410A User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual