ADT Smart Home PM360-R User manual
QUICK CONSUMER
REFERENCE GUIDE
Your System: ADT
Smart Home
Keyholder Response
Starting to use the Keypad, ADT
Smart Home
App and web portal
1
Setting your System using your keypad
Step 1
When leaving your home ensure that all protected doors/windows, including your
front door, are closed before setting your System.
Step 2
Set your System using The Keypad – by pressing the “set” key on the Keypad and
entering your 4-Digit User Code / or presenting your Keyfob.
Step 3
You will hear 30 seconds of Intermittent beeping to remind you to leave the property
via your specied exit route. You have to leave your property and close the exit door
during this 30 second time period
Step 4
After this 30 second time period, the beeping stops, and your system is successfully
set.
PM360-R Alarm Panel Keypad KeyFob ADT Smart Home
Security App
Extras
ADT Smart Home Security
Web Portal
2
Setting your System with the ADT
Smart Home Security
App
Step 1
When leaving your home ensure that all protected doors/windows, including your
front door, are closed before setting your System.
Step 2
From your Smart Phone, launch the
ADT Smart Home Security App,
enter your Contract Number into
the eld Username, enter your
Password, and press Connect.
Step 3
By default, the rst screen displayed after
login is the Security screen. The Security
screen is used to set, part set or unset
the ADT Smart Home Security Alarm Panel.
Click on button Set.
Step 4
A 30 second exit delay countdown is displayed, this is the
time left for leaving your home before the alarm panel
is actually set.
3
Step 5
At the end of the countdown, the Lock icon becomes red,
indicating that the alarm panel is set.
Setting your System with the ADT
Smart Home Security
Web Portal
Step 1
From your favorite web browser, enter the
URL of the ADT Smart Home Security
Web Portal:
https://interactivesecurity.adt.co.uk
/selfcare
Step 2
Enter your Contract Number into the eld Username, enter your Password, and press
Go.
Step 3
By default, the rst screen displayed after
login is the Security Dashboard screen.
The three buttons UNSET, PARTIAL SET
and SET at the top of the dashboard panel
are used to respectively set, part set or
unset the ADT Smart Home Security
Alarm Panel.
Click on button SET.
4
Step 4
A 30 second exit delay countdown is
displayed, this is the time left for leaving
your home before the alarm panel is
actually set.
Step 5
After a few seconds, the Lock icon
becomes red, indicating that the
ADT Smart Home Security panel
is set.
Unsetting your System using your keypad
The System unsetting starts as soon as you open your entry door or enter a protected
zone which activates the System.
Step 1
Enter your home via your specied entry route.
Step 2
Unset your System using the Keypad – by pressing the “unset” key on the
Keypad and entering your 4-Digit User Code / or presenting your Keyfob.
Step 3
You will hear a beep from the Keypad or Alarm Panel conrming that your System is
successfully unset.
Important: Unsetting the alarm stops the Internal Sounder ringing should the Alarm
be activated but will not interrupt the transmission of the alarm signal to the ADT
Alarm Monitoring Centre.
5
Unsetting your System with the ADT
Smart Home Security
App
Step 1
From your Smart Phone, launch the
ADT Smart Home Security App, enter
your Contract Number into the eld
Username, enter your Password, and
press Connect
Step 2
By default, the rst screen displayed after login
is the Security screen. The Security screen is
used to set, part set or unset the ADT Smart Home
Security Alarm Panel.
Click on button Unset.
Step 3
Unsetting the alarm system requires entering
your account password
Then click on Yes.
Important: If you have ngerprint scanner technology
available on your device you will be prompted to use
your ngerprint to conrm the unsetting of your alarm.
If you do not have ngerprint scanner technology,
please follow the steps above and use your password
to unset the alarm.
6
Step 4
After few seconds, the Lock icon becomes green,
indicating that the ADT Smart Home Security
panel is unset.
Unsetting your System with the ADT
Smart Home Security
Web
Portal
Step 1
From your favorite web browser, enter the URL
of the ADT Smart Home Security Web Portal:
https://interactivesecurity.adt.co.uk/selfcare
Step 2
Enter your Contract Number into the eld Username, enter your Password, and press
Go.
Step 3
By default, the rst screen displayed after
login is the Security Dashboard screen.
The three buttons UNSET, PARTIAL SET
and SET at the top of the dashboard
panel are used to respectively set, part
set or unset the ADT Smart Home
Security Alarm Panel.
Click on button UNSET.
7
Step 4
After a few seconds, the Lock icon
becomes green, indicating that the
ADT Smart Home Security panel
is unset.
Part-setting your System using your keypad
Part-setting allows you to protect part/s of your property when you are at home. For
example, protecting the downstairs area whilst you are sleeping upstairs. The part-
set option can be programmed to your System during your System installation or a
service visit.
Step 1
Part-set your System using the Keypad – by pressing the “part-set” key on the
Keypad and entering your 4-Digit User Code / or presenting your Keyfob.
Step 2
Your System is now part-set.
Part-setting your System with the ADT
Smart Home Security
App
Step 1
If leaving your home or not, ensure that all protected doors/windows in the protected
area, including your front door, are closed before part setting your System.
Step 2
From your Smart Phone, launch the
ADT Smart Home Security App, enter
your Contract Number into the eld
Username, enter your Password, and
press Connect.
8
Part-setting your System with the ADT
Smart Home Security
App
Step 3
By default, the rst screen displayed
after login is the Security screen. The
Security screen is used to set, part set or
unset the ADT Smart Home Security
Alarm Panel.
Click on button Partial Set.
Step 4
A 30 second exit delay countdown is displayed,
this is the time left for leaving your home, or leaving
the home areas protected by the peripheral security
sensors, before the alarm panel is partial set.
Step 5
At the end of the countdown, the Lock icon becomes
yellow, indicating that the alarm panel is partial set.
9
Part-setting your System with the ADT
Smart Home Security
Web
Portal
Step 1
From your favorite web browser, enter
the URL of the ADT Smart Home Security
Web Portal:
https://interactivesecurity.adt.co.uk/selfcare
Step 2
Enter your Contract Number into the eld Username, enter your Password, and press
Go.
Step 3
By default, the rst screen displayed
after login is the Security Dashboard
screen. The three buttons UNSET,
PARTIAL SET and SET at the top of
the dashboard panel are used to
respectively set, part set or unset
the ADT Smart Home Security
Alarm Panel.
Click on button PARTIAL SET.
10
Step 4
A 30 second exit delay countdown
is displayed, this is the time left for
leaving your home or leaving the
home areas protected by the
peripheral security sensors, before
the alarm panel is partial set.
Step 5
After a few seconds, the Lock icon
becomes yellow, indicating that
the ADT Smart Home Security
panel is partial set.
Resetting/Silencing your System after an alarm
To stop the Alarm sounding using the Keypad – by pressing the “unset” key
and entering your 4-Digit User Code /or presenting your Keyfob.
Important: Resetting/Silencing your System stops the Internal Sounder ringing but
will not interrupt the transmission of the alarm signal to the ADT Alarm Monitoring
Centre. Our monitoring specialists may contact you at this point and you will be
requested to conrm your Verication Code /Password to cancel the alarm alert. Your
System might be required to be reset remotely
Table of contents
Other ADT Security System manuals
ADT
ADT Smart Home PM360 User manual
ADT
ADT BHS-3000C User manual
ADT
ADT Safewatch Plus Entrepreneur User manual
ADT
ADT ADTHYBWL Series User manual
ADT
ADT 3G Cellular Medical Alert System User manual
ADT
ADT Safewatch Pro 3000 Operating instructions
ADT
ADT SASW3000EN User manual
ADT
ADT ADT7AIO Series Instruction manual
ADT
ADT ADTHYBWL Series User manual
ADT
ADT DSC Impassa User manual
ADT
ADT Safewatch Pro 3000 User manual
ADT
ADT L5000 Lynx Use and care manual
ADT
ADT TSSC Assembly instructions
ADT
ADT EZ Installation and operating instructions
ADT
ADT Fall Detection Pendant User manual
ADT
ADT Keychain Remote User manual
ADT
ADT PremisePro none User manual
ADT
ADT DSC Impassa User manual
ADT
ADT On-The-Go Emergency Response System User manual
ADT
ADT Safe-N-Go User manual
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual