ADT DSC 9047 User manual

For a detailed review of the entire system, please view the DSC 9047 system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY] key

for two seconds, or enter your [security code] and exit before the exit delay expires.

To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for

two seconds, or enter your [security code] and do not leave the premises.

Disarm:

To disarm, enter your [security code] before the entry delay expires.

Battery

The DSC Power Series 9047 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Quick Guide:

DSC 9047

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, the function menu by pressing [*] again to reach [Zone Bypass].

Press either [1] or [*], then your [security code].

Enter the zone number to be bypassed or use the [<] [>] keys to locate the zone number + [*]

When a zone is correctly bypassed, a [B] will appear next to the zone number on the display.

Press [#] to exit.

To unbypass, repeat the bypass procedure on arm and disarm your system.

Change Date and Time

To change date and time:

Press [*] + [6] + [Master security code] + [1].

Use the [<] [>] to find the [Time and Date] menu option, then press [*] to select.

Enter the minutes and hours in 24-hour format, i.e., 16:34 for 4:45 pm.

Enter the date, months, and year in MM:DD:YY format, i.e., 082317 for August 13, 2017.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, hold [CHIME] for several seconds or press [*] + [4].

Reset

To clear the display after an alarm event, arm and disarm your system.

Security Codes

Your system allows for up to 16 additional users, however only the Master user can program user codes and

attributes.

To program a new user, press [*] + [5] + [Master security code].

Enter the two-digit number to be programmed, i.e., 06 for Access Code 6.

Enter the new user’s new code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, press [*] + [5] [Master code] + [user access code] + [*].

Press [#] to exit.

Trouble Conditions

When a Trouble Condition is detected, the word ‘FAULT’will be displayed on the panel.

To view the Trouble Condition, press [*] + [2] and use the [<] [>] to scroll.

To silence the Trouble Condition beeps, press [#].

Volume

To adjust the buzzer volume level, press [*] + [6] + [Master code].

Use the [<] [>] keys to scroll to [Buzzer Control] and then press [*].

Once the desired volume has been selected, press [#] to save the selection.

Table of contents

Other ADT Security System manuals

ADT

ADT ADTHYBWL Series User manual

ADT

ADT SafeWatch 3000 User manual

ADT

ADT Safewatch Plus Entrepreneur User manual

ADT

ADT FOCUS CADET User manual

ADT

ADT ADT2X16AIO Assembly instructions

ADT

ADT L5000 Lynx Use and care manual

ADT

ADT Ademco Vista 20 User manual

ADT

ADT iCenter 8142ADT User manual

ADT

ADT ADT7AIO Series Assembly instructions

ADT

ADT Smart Home PM360-R User manual

ADT

ADT Safewatch Pro 3000 User manual

ADT

ADT Safewatch Pro 3000 User guide

ADT

ADT Safewatch Pro 3000 Operating instructions

ADT

ADT Health Fall Detection Pendant User manual

ADT

ADT Galaxy 8 User manual

ADT

ADT 6160VPADT Assembly instructions

ADT

ADT Smart Home PM360 User manual

ADT

ADT Garda Response PM30 User manual

ADT

ADT Safewatch User manual

ADT

ADT TSSC Assembly instructions

ADT

ADT Safewatch QuickConnect Plus User manual

ADT

ADT Ademco Vista 20P/PSIA User manual

ADT

ADT On-The-Go Emergency Response System User manual

ADT

ADT BHS-4000A User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual