ACU-RITE DRO10X User manual
Changing the Count Direction
on a DRO10X
Note which port the encoder you
need to change is plugged into. You
will need this information for later.
Changing the Count Direction
on a DRO10X
Power up the box.
When prompted,
press any key to
continue.
The power switch is located on the back,
directly under the power cord.
Changing the Count Direction
on a DRO10X
Reference your
encoders by
moving each axes
so they cross at
least 2 reference
marks on the
glass (~3“).
Changing the Count Direction
on a DRO10X
Press the Menu
button.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
Installation Setup
menu, and then
press enter.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys to
highlight the
Encoder Setup
menu, and then
press the right
arrow key.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
port the encoder
you want to
change resolution
on is plugged into,
and then press
enter.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
Count Direction
change menu,
then press the
right arrow key.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
opposite Count
Direction, and
then press enter
twice.
Changing the Count Direction
on a DRO10X
Other ACU-RITE Measuring Instrument manuals
ACU-RITE
ACU-RITE 06008RM User manual
ACU-RITE
ACU-RITE smartHUB User manual
ACU-RITE
ACU-RITE 00325CADI User manual
ACU-RITE
ACU-RITE 01083 User manual
ACU-RITE
ACU-RITE 00276RM User manual
ACU-RITE
ACU-RITE 00256 User manual
ACU-RITE
ACU-RITE 325 User manual
ACU-RITE
ACU-RITE 200S READOUTS User manual
ACU-RITE
ACU-RITE 01410 User manual
ACU-RITE
ACU-RITE ENC 125 T User manual
