ACTi ACM-3701E User manual
Megapixel IP Dome
ACM-3401
Megapixel Day&Night IP Dome
ACM-3411
Ver. 080130
Quick Installation Guide
Megapixel IP Vandal Proof PoE Indoor Mini Dome
ACM-3701E
Ver. 120803
Quick Installation Guide
0-1
0Getting Started
1.1 PACKAGE CONTENTS
ACM-3701E Product CD
Warranty Card Drill Template
Mount Screws Allen/Hex Key
RJ45 Field Installable Feed
Through Adaptor
1
0-2
1.2 PHYSICAL DESCRIPTION
1. Ethernet Indicator LED
The LED will indicate ethernet speed and active states after IP
camera has connected completely.
2. Power LED
The LED will light up after IP camera has successfully completed
the boot process
3. Reset Button
Step 1: Switch off IP device by disconnecting the power cable
Step 2: Press and continue to hold the Reset Button. Reconnect
the power cable while continuing to hold the reset button.
Step 3: Keep holding the reset button depressed around 16
seconds, release the reset button. The unit will start up with
factory default settings.
0-3
Model
ACM-3701E
Picture
Type
Rugged RJ-45 Connector
4. Ethernet Port
The IP device connects to the Ethernet via a female RJ-45
industrial connector.
The Ethernet port supporting Power over Ethernet.
Supporting NWAY, this IP device can auto detect the speed of
local network segment (10Base-T/100Base-TX Ethernet).
0-1
1.3 BASIC CONNECTIONS
Follow the procedures below to connect the IP device to the respective
apparatuses.
1. Connect this IP device’s ethernet port to an Ethernet (RJ45 connector). IP
device has only PoE built-in, you must regard it as a PD and connect it
directly to a PSE device like PoE switch.
2. Connect a PC to the Ethernet hub
NOTE: You may find a support package for help you getting familiar
with PoE. Please visit our web site, and get the support document
TS-00040.
1-2
1Quick Tour
This section guides you with a quick tour on this IP device.
2.1 Configure this IP Device
2.1.1 Make sure network environment
Default IP of this IP device is 192.168.0.100. Please make sure this IP device and
your PC are on the same network segment before running the installation.
2
Please set the settings as below.
IP address: 192.168. 0.xxx
Subnet mask: 255.255.255. 0
(NOTE: xxx should be a number
from 1 to 254, but 100 is
excepted.)
1-3
2.1.2 Open Internal Explorer with IP address
NOTE: If your web browser is earlier than IE6, then download IE6 is
recommended.
NOTE: This IP device default IP address is set to 192.168.0.100
2.1.3 Login with default administrator’s account & password
NOTE: Default administrator account is set to Admin, password is set to
123456, and click button.
1-4
2.1.4 Preview the video
2.1.5 Set the new IP address
Other manuals for ACM-3701E
1
Table of contents
Other ACTi IP Camera manuals
ACTi
ACTi CAM-5300H User manual
ACTi
ACTi ACM-5811 series User manual
ACTi
ACTi TCM-5611 Series User manual
ACTi
ACTi CAM-5200S User manual
ACTi
ACTi ACM-1432 Instructions for use
ACTi
ACTi ACM-4100 series User manual
ACTi
ACTi KCM-5211 User manual
ACTi
ACTi TCM-3111 User manual
ACTi
ACTi CAM-5100H User manual
ACTi
ACTi CAM-7300 series Instructions for use
ACTi
ACTi CAM-5200S User manual
ACTi
ACTi ACM-4201 Instructions for use
ACTi
ACTi CAM-6200 Manual
ACTi
ACTi ACM-8511 User manual
ACTi
ACTi CAM-5100M User manual
ACTi
ACTi ACM-4200 series User manual
ACTi
ACTi TCM-4301 User manual
ACTi
ACTi ACM-4200 series Instructions for use
ACTi
ACTi ACM-4201 User manual
ACTi
ACTi TCM-4101 Instructions for use
