YASKAWA YRC1000 User manual

MANUAL NO.

HW1483388

YRC1000

OPERATOR’S MANUAL

FOR LADDER EDITOR

Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and

retain for future reference.

MOTOMAN INSTRUCTIONS

MOTOMAN- INSTRUCTIONS

YRC1000 INSTRUCTIONS

YRC1000 OPERATOR’S MANUAL (GENERAL) (SUBJECT SPECIFIC)

YRC1000 MAINTENANCE MANUAL

YRC1000 ALARM CODES (MAJOR ALARMS) (MINOR ALARMS)

The YRC1000 operator’s manual above corresponds to specific usage. Be sure to use the appropriate manual.

The YRC1000 operator’s manual above consists of “GENERAL” and “SUBJECT SPECIFIC”.

The YRC1000 alarm codes above consists of “MAJOR ALARMS” and “MINOR ALARMS”.

1/58

179482-1CD

HW1483388

DANGER

• This manual explains the ladder editor function of the YRC1000

system. Read this manual carefully and be sure to understand its

contents before handling the YRC1000. Any matter not described

in this manual must be regarded as "prohibited" or "improper".

• General information related to safety are described in "Chapter 1.

Safety" of the YRC1000 INSTRUCTIONS. To ensure correct and

safe operation, carefully read "Chapter 1. Safety" of the YRC1000

INSTRUCTIONS.

CAUTION

• In some drawings in this manual, protective covers or shields are

removed to show details. Make sure that all the covers or shields

are installed in place before operating this product.

• YASKAWA is not responsible for incidents arising from unauthorized

modification of its products. Unauthorized modification voids the

product warranty.

NOTICE

• The drawings and photos in this manual are representative

examples and differences may exist between them and the

delivered product.

• YASKAWA may modify this model without notice when necessary

due to product improvements, modifications, or changes in

specifications. If such modification is made, the manual number will

also be revised.

•If your copy of the manual is damaged or lost, contact a YASKAWA

representative to order a new copy. The representatives are listed

on the back cover. Be sure to tell the representative the manual

number listed on the front cover.

2/58

iii

HW1483388

NOTES FOR SAFE OPERATION

Read this manual carefully before installation, operation, maintenance, or

inspection of the YRC1000.

In this manual, the Notes for Safe Operation are classified as “DANGER”,

“WARNING”, “CAUTION”, or “NOTICE”.

Even items described as “CAUTION” may result in a serious accident in

some situations.

At any rate, be sure to follow these important items.

DANGER

Indicates an imminently hazardous

situation which, if not avoided, will

result in death or serious injury.

Safety Signs identified by the signal

word DANGER should be used

sparingly and only for those

situations presenting the most

serious hazards.

WARNING

Indicates a potentially hazardous

situation which, if not avoided, will

result in death or serious injury.

Hazards identified by the signal

word WARNING present a lesser

degree of risk of injury or death than

those identified by the signal word

DANGER.

CAUTION

Indicates a hazardous situation,

which if not avoided, could result in

minor or moderate injury. It may

also be used without the safety alert

symbol as an alternative to

“NOTICE”.

NOTICE

NOTICE is the preferred signal word

to address practices not related to

personal injury. The safety alert

symbol should not be used with this

signal word. As an alternative to

“NOTICE”, the word “CAUTION”

without the safety alert symbol may

be used to indicate a message not

related to personal injury.

NOTE

To ensure safe and efficient operation at all times, be sure

to follow all instructions, even if not designated as “DAN-

GER”, “WARNING” and “CAUTION".

3/58

HW1483388

DANGER

• Before operating the manipulator, make sure the servo power is

turned OFF by performing the following operations. When the servo

power is turned OFF, the SERVO ON LED on the programming

pendant is turned OFF.

– Press the emergency stop buttons on the front door of the

YRC1000, on the programming pendant, on the external control

device, etc.

– Disconnect the safety plug of the safety fence.

(when in the play mode or in the remote mode)

If operation of the manipulator cannot be stopped in an emergency,

personal injury and/or equipment damage may result.

Fig. : Emergency Stop Button

• Before releasing the emergency stop, make sure to remove the

obstacle or error caused the emergency stop, if any, and then turn

the servo power ON.

Failure to observe this instruction may cause unintended movement of

the manipulator, which may result in personal injury.

Fig. : Release of Emergency Stop

TURN

• Observe the following precautions when performing a teaching

operation within the manipulator's operating range:

– Be sure to perform lockout by putting a lockout device on the

safety fence when going into the area enclosed by the safety

fence. In addition, the operator of the teaching operation must

display the sign that the operation is being performed so that no

other person closes the safety fence.

– View the manipulator from the front whenever possible.

– Always follow the predetermined operating procedure.

– Always keep in mind emergency response measures against the

manipulator’s unexpected movement toward a person.

– Ensure a safe place to retreat in case of emergency.

Failure to observe this instruction may cause improper or unintended

movement of the manipulator, which may result in personal injury.

• Confirm that no person is present in the manipulator's operating

range and that the operator is in a safe location before:

– Turning ON the YRC1000 power

– Moving the manipulator by using the programming pendant

– Running the system in the check mode

– Performing automatic operations

Personal injury may result if a person enters the manipulator's

operating range during operation. Immediately press an emergency

stop button whenever there is a problem. The emergency stop buttons

are located on the front panel of the YRC1000 and on the right of the

programming pendant.

• Read and understand the Explanation of the Warning Labels before

operating the manipulator.

4/58

HW1483388

Definition of Terms Used Often in This Manual

The MOTOMAN is the YASKAWA industrial robot product.

The MOTOMAN usually consists of the manipulator, the controller, the

programming pendant, and supply cables.

In this manual, the equipment is designated as follows.

WARNING

• Perform the following inspection procedures prior to conducting

manipulator teaching. If there is any problem, immediately take

necessary steps to solve it, such as maintenance and repair.

– Check for a problem in manipulator movement.

– Check for damage to insulation and sheathing of external wires.

• Always return the programming pendant to the hook on the

YRC1000 cabinet after use.

If the programming pendant is left unattended on the manipulator, on a

fixture, or on the floor, etc., the Enable Switch may be activated due to

surface irregularities of where it is left, and the servo power may be

turned ON. In addition, in case the operation of the manipulator starts,

the manipulator or the tool may hit the programming pendant left

unattended, which may result in personal injury and/or equipment

damage.

Equipment Manual Designation

YRC1000 Controller YRC1000

YRC1000 Programming Pendant Programming Pendant

Cable between the manipulator and the

controller Manipulator cable

5/58

HW1483388

Descriptions of the programming pendant keys, buttons, and displays are

shown as follows:

Description of the Operation Procedure

In the explanation of the operation procedure, the expression "Select • • • "

means that the cursor is moved to the object item and [SELECT] is

pressed, or that the item is directly selected by touching the screen.

Registered Trademark

In this manual, names of companies, corporations, or products are

trademarks, registered trademarks, or brand names for each company or

corporation. The indications of (R) and TM are omitted.

Equipment Manual Designation

Programming

Pendant Character Keys

/Symbol Keys The keys which have characters or symbols

printed on them are denoted with [ ].

ex. [ENTER]

Axis Keys

/Numeric Keys [Axis Key] and [Numeric Key] are generic

names for the keys for axis operation and

number input.

Keys pressed

simultaneously When two keys are to be pressed

simultaneously, the keys are shown with a

“+” sign between them,

ex. [SHIFT]+[COORD]

Displays The menu displayed in the programming

pendant is denoted with { }.

ex. {JOB}

6/58

Contents

vii

HW1483388

1 Editing Ladder Programs ............................................................................................................... 1-1

1.1 Flow of Data by Ladder Programs..................................................................................... 1-1

1.2 Editing by Mnemonic and Editing Program........................................................................ 1-2

1.3 Ladder Editor Window ....................................................................................................... 1-3

1.3.1 Basic Operation.................................................................................................... 1-3

1.3.2 Editing Operation of Ladder View Window........................................................... 1-7

1.3.2.1 Insert New Rungs.................................................................................... 1-7

1.3.2.2 Cut (Copy) and Paste Rungs .................................................................. 1-8

1.3.3 Editing Operation of Ladder Editing Window...................................................... 1-12

1.3.3.1 Inserting and Changing Instructions...................................................... 1-12

1.3.3.2 Delete Instructions ................................................................................ 1-18

1.3.3.3 Insert Columns ...................................................................................... 1-19

1.3.3.4 Insert Rows ........................................................................................... 1-21

1.3.3.5 Delete Columns..................................................................................... 1-23

1.3.3.6 Delete Rows.......................................................................................... 1-24

1.3.3.7 Undo and Redo ..................................................................................... 1-25

1.3.3.8 Clear Rungs .......................................................................................... 1-27

1.3.3.9 Save Edited Ladders............................................................................. 1-28

1.3.4 Compile .............................................................................................................. 1-30

1.3.5 Search................................................................................................................ 1-31

1.3.5.1 Go to the First Rung / Last Rung........................................................... 1-31

1.3.5.2 Go to Rung............................................................................................ 1-32

1.3.5.3 Find Value ............................................................................................. 1-33

1.3.5.4 Find Forward ......................................................................................... 1-34

1.3.5.5 Find Output Relays ............................................................................... 1-35

1.3.6 Other Functions.................................................................................................. 1-36

1.3.6.1 Header Information ............................................................................... 1-36

1.3.6.2 Instruction Use Table ............................................................................ 1-37

1.3.6.3 Relay Use Table.................................................................................... 1-39

1.3.6.4 Register Specification List..................................................................... 1-41

1.3.6.5 Mnemonic Display................................................................................. 1-43

1.3.6.6 Open Relay Label File........................................................................... 1-44

1.3.6.7 Input Name............................................................................................ 1-46

2 Ladder Monitoring Function ........................................................................................................... 2-1

7/58

1 Editing Ladder Programs

1.1 Flow of Data by Ladder Programs

1-1

HW1483388

1 Editing Ladder Programs

1.1 Flow of Data by Ladder Programs

Flow of data in editing, storage, and execution areas by operation of

ladder program is shown below.

EXECUTION

PROGRAM

INTERMEDIATE

CODE AREA

PROCESSING

WORK

MEMORY

CONTROL

POWER ON

STORAGE

MEMORY

SAVE

COMPILE

EDITING AREA

SYSTEM

SECTION

WORK

MEMORY

EDITING

LOAD

SAVE

EXTERNAL

MEMORY UNIT

ACP01 BOARD

LADDER PROGRAM

DISPLAY



NOTE

• Only the user ladder program can be edited. The system

ladder program cannot be edited.

• When the system ladder program is changed, the ladder

program from the external memory unit cannot be loaded.

• If control power is shut down while the ladder program is

being edited, the edited ladder program is lost. The intact

program remains in the execution area.

• During editing of ladder programs, “EDITING” is indicated

on the upper right of the user section display. This indica-

tion appears only when the program in the editing area

and that in the execution area do not match. No indication

will be displayed after compilation of cancellation of edit-

ing when the programs in the two areas match.

8/58

1 Editing Ladder Programs

1.2 Editing by Mnemonic and Editing Program

1-2

HW1483388

1.2 Editing by Mnemonic and Editing Program

The editing operations for ladder programs are two ways as follows.

1. Editing by Mnemonic Codes

– Ladder programs can be edited in mnemonic codes as shown

below.

2. Editing by Editing Program

– Ladder programs can be edited with the image of ladders as shown

in the window below.

9/58

1 Editing Ladder Programs

1.3 Ladder Editor Window

1-3

HW1483388

1.3 Ladder Editor Window

1.3.1 Basic Operation

The Ladder Editor consists of Ladder View window and Ladder Editing

window.

The ladders to be edited are selected in the Ladder View window.

Ladder programs are edited in the Ladder Editing window.

1. Select {IN/OUT} under the main menu.

2. Select {LADDER EDITOR}.

– The view window of the User Ladder appears.

Compile Radder program overwrite

Radder View Window Radder Editing Window

Select the ladder

to be editted

Cancel the

completion of

the registration

10/58

Other manuals for YRC1000

Table of contents

Other YASKAWA Controllers manuals

YASKAWA

YASKAWA MOTOMAN FS100 User manual

YASKAWA

YASKAWA Motoman DX200 User manual

YASKAWA

YASKAWA MOTOMAN FS100 User manual

YASKAWA

YASKAWA SIGMA-7 Series User manual

YASKAWA

YASKAWA Motoman DX200 User manual

YASKAWA

YASKAWA SI-EP3 User manual

YASKAWA

YASKAWA Motoman MLX200 Mounting instructions

YASKAWA

YASKAWA PS-V10S User manual

YASKAWA

YASKAWA A1000 Series User manual

YASKAWA

YASKAWA Motoman DX200 User manual

YASKAWA

YASKAWA MotionSuite MP940 User manual

YASKAWA

YASKAWA PROFINET V1000 User manual

YASKAWA

YASKAWA MP2000 Series Instruction Manual

YASKAWA

YASKAWA GA800 Series Instruction Manual

YASKAWA

YASKAWA J1000 CIMR-JC series User manual

YASKAWA

YASKAWA 1000 Series User manual

YASKAWA

YASKAWA PG-F3 User manual

YASKAWA

YASKAWA YRC1000 User manual

YASKAWA

YASKAWA Varispeed DI-16H2 User manual

YASKAWA

YASKAWA Z1000U Series User manual

YASKAWA

YASKAWA Lift Inverter L1000V User manual

YASKAWA

YASKAWA SGD7S series User manual

YASKAWA

YASKAWA PROFINET V1000 User manual

YASKAWA

YASKAWA J1000 CIMR-JC series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide