YASKAWA MP2000 Series Programming manual

MANUAL NO. SIEP C880700 45A

モーションコントロール事業部（A4）（英文）

Overview of Troubleshooting

Troubleshooting Errors in Communication with MPE720

Troubleshooting Errors in Message Communication

MP2300

TEST

RDY

ALM

RUN

ERR

BAT

MON

CNFG

INT

SUP

STOP

SW1

OFF ON

M-4/10

BATTERY

CPU I/O

DC24V

DC 0V

RUN

STRX

ERR

COL

PORT

OFF　ON

10Base-T

INIT

TEST

Ethernet Communication

Machine Controller MP2000 Series

Troubleshooting Manual

or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording,

or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed

with respect to the use of the information contained herein. Moreover, because Yaskawa is con-

stantly striving to improve its high-quality products, the information contained in this manual is

subject to change without notice. Every precaution has been taken in the preparation of this

manual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions. Neither is

any liability assumed for damages resulting from the use of the information contained in this

publication.

Preface

This manual describes the methods for troubleshooting the trouble that occurs while using devices that are connected to

an MP2000 Series Machine Controller via Ethernet.

Read this manual carefully to ensure correct operation in Ethernet communication with MP2000 Series Machine Con-

trollers.

Using this Manual

Read this manual carefully to ensure the proper use of the MP2000 Series Machine Controller. Also, keep this manual

in a safe place so that it can be referred to whenever necessary.

Visual Aids

The following aids are used to indicate certain types of information for easier reference.

• Indicates important information that should be memorized.

• Indicates supplemental information.

Copyrights

IMPORTANT

INFO

• DeviceNet is a registered trademark of the ODVA (Open DeviceNet Venders Association).

• PROFIBUS is a trademark of the PROFIBUS User Organization.

• Ethernet is a registered trademark of the Xerox Corporation.

• MPLINK is a registered trademark of the YASKAWA Electric Corporation.

• Microsoft, Windows, Windows NT, and Internet Explorer are registered trademarks of the Microsoft Corporation.

• MECHATROLINK is a trademark of the MECHATROLINK Members Association.

• Other product names and company names are the trademarks or registered trademarks of the respective company. “TM”

and the ®mark do not appear with product or company names in this manual.

iii

Related Manuals

Refer to the following related manuals as required. Thoroughly check the specifications, restrictions, and

other conditions of the product before attempting to use it.

Manual Name Manual Number Contents

Machine Controller MP2200 User’s Manual SIEP C880700 14 Describes how to use the MP2200 Machine Control-

ler and the modules that can be connected.

Machine Controller MP2000 Series MPU-01

Multiple-CPU Module User’s Manual SIEP C880781 05

Describes the functions, specifications, and operation

procedures of the MPU-01 Motion CPU Module that

can be connected to MP2000 Series Machine Con-

trollers.

Machine Controller MP2300 Basic Module

User’s Manual SIEP C880700 03 Describes the application methods and modules to be

connected.

Machine Controller MP2000 Series Communica-

tion Module User’s Manual SIEP C880700 04

Describes the functions, specifications, and applica-

tion methods of the MP2000-series Communication

Modules (217IF, 218IF, 260IF, 261IF).

Machine Controller MP900/MP2000 Series

User’s Manual, Ladder Programming SIEZ-C887-1.2 Describes the instructions used in MP900/MP2000

ladder programming.

Machine Controller MP900/MP2000 Series

User’s Manual Motion Programming SIEZ-C887-1.3 Describes the instructions used in MP900/MP2000

motion programming.

Engineering Tool for MP2000-series Machine

Controller MPE720 Version 6 User’s Manual SIEP C880700 30

Describes the installation and operation of the engi-

neering tools for MP2000-series Machine Controller

MPE720 Version 6.

Machine Controller MP900/MP2000 Series

MPE720 Software for Programming Device

User’s Manual

SIEP C880700 05 Describes how to install and operate the MP900/

MP2000-series programming system (MPE720).

Machine Controller MP900/MP2000 Series

New Ladder Editor User’s Manual

Programming Manual

SIEZ-C887-13.1

Describes the programming instructions of the New

Ladder Editor, which assists MP900/MP2000-series

design and maintenance.

Machine Controller MP900/MP2000 Series

New Ladder Editor User’s Manual Operation SIEZ-C887-13.2

Describes the operating methods of the New Ladder

Editor, which assists MP900/MP2000-series design

and maintenance.

Safety Information

This manual presents safety information using the following notices. The safety information is important and

must be observed.

Indicates precautions that, if not heeded, could possibly result in loss of life, serious

injury, or property damage.

Indicates precautions that, if not heeded, could result in relatively serious or minor

injury, or property damage.

If not heeded, even precautions classified under can lead to serious results

depending on circumstances.

Indicates prohibited actions. Specific prohibitions are indicated inside .

For example, indicates prohibition of open flame.

Indicates mandatory actions. Specific actions are indicated inside .

For example, indicates mandatory grounding.

WARNING

CAUTION

PROHIBITED

MANDATORY

Safety Precautions

The following precautions are for checking products on delivery, storage, transportation, installation, wiring, operation,

application, inspection, and disposal. These precautions are important and must be observed.

General Precautions

• Before connecting the machine and starting operation, ensure that an emergency stop procedure has

been provided and is working correctly.

There is a risk of injury.

• Do not touch anything inside the product.

There is a risk of electrical shock.

• Always keep the front cover attached when power is being supplied.

There is a risk of electrical shock.

• Observe all procedures and precautions given in this manual for trial operation.

Operating mistakes while the servomotor and machine are connected may damage the machine or even cause

accidents resulting in injury or death.

There is a risk of electrical shock.

• Do not remove the front cover, cables, connector, or options while power is being supplied.

There is a risk of electrical shock.

• Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch cables.

There is a risk of electrical shock, operational failure or burning of the MP2000 Series Machine Controller.

• Do not attempt to modify the MP2000 Series Machine Controller in any way.

There is a risk of injury or device damage.

• Do not approach the machine during a momentary interruption of the power supply. When the power

is restored, the MP2000 Series Machine Controller and the device connected to it may start opera-

tion suddenly. Implement safety measures in advance to ensure the safety of personnel in the event

that operation restarts suddenly.

There is a risk of injury.

• Do not allow installation, disassembly, or repairs to be performed by anyone other than specified per-

sonnel.

There is a risk of electrical shock or injury.

WARNING

Storage and Transportation

Installation

• Do not store or install the MP2000 Series Machine Controller in the following locations.

There is a risk of fire, electrical shock, or device damage.

Direct sunlight

Ambient temperature exceeds the storage or operating conditions

Ambient humidity exceeds the storage or operating conditions

Rapid changes in temperature or locations subject to condensation

Corrosive or flammable gas

Excessive dust, dirt, salt, or metallic powder

Water, oil, or chemicals

Vibration or shock

• Do not overload the MP2000 Series Machine Controller during transportation.

There is a risk of injury or an accident.

• Never subject the product to an atmosphere containing halogen (fluorine, chlorine, bromine, or

iodine) during transportation or installation.

There is a risk of device damage or an accident.

• If disinfectants or insecticides must be used to treat packing materials such as wooden frames, pal-

lets, or plywood, the packing materials must be treated before the product is packaged, and methods

other than fumigation must be used.

Example: Heat treatment, where materials are kiln-dried to a core temperature of 56°C for 30 minutes or

more.

If the electronic products, which include stand-alone products and products installed in machines, are packed

with fumigated wooden materials, the electrical components may be greatly damaged by the gases or fumes

resulting from the fumigation process. In particular, disinfectants containing halogen, which includes chlorine,

fluorine, bromine, or iodine can contribute to the erosion of the capacitors.

• Never use the MP2000 Series Machine Controller in locations subject to water, corrosive atmo-

spheres, or flammable gas, or near burnable objects.

There is a risk of electrical shock or fire.

• Do not step on the MP2000 Series Machine Controller or place heavy objects on it.

There is a risk of injury.

• Do not block the air exhaust port or allow foreign objects to enter the MP2000 Series Machine Con-

troller.

There is a risk of element deterioration inside, an accident, or fire.

• Always mount the MP2000 Series Machine Controller in the specified orientation.

There is a risk of an accident.

• Do not subject the MP2000 Series Machine Controller to strong shock.

There is a risk of an accident.

CAUTION

vii

Wiring

Selecting, Separating, and Laying External Cables

• Check the wiring to be sure it has been performed correctly.

There is a risk of motor run-away, injury, or an accident.

• Always use a power supply of the specified voltage.

There is a risk of burning.

• In places with poor power supply conditions, take all steps necessary to ensure that the input power

supply is within the specified voltage range.

There is a risk of device damage.

• Install breakers and other safety measure to provide protection against shorts in external wiring.

There is a risk of fire.

• Provide sufficient shielding when using the MP2000 Series Machine Controller in the following loca-

tions.

There is a risk of device damage.

Noise, such as from static electricity

Strong electromagnetic or magnetic fields

Radiation

Near to power lines

• When connecting the battery, connect the polarity correctly.

There is a risk of battery damage or explosion.

• Only qualified safety-trained personnel should replace the battery.

If the battery is replaced incorrectly, machine malfunction or damage, electric shock, or injury may result.

• When replacing the battery, do not touch the electrodes.

Static electricity may damage the electrodes.

• After replacing the battery, separate the used battery from regular waste and deal with it according to

the applicable local regulations.

• Consider the following points when selecting the I/O signal lines (external cables) to connect the

MP2000 Series Machine Controller to external devices.

Mechanical strength

Noise interference

Wiring distance

Signal voltage, etc.

• It is possible to reduce the influence of noise from the power lines. For that purpose, separate the I/O

signal lines from the power lines both inside and outside the control box.

If the I/O signal lines and power lines are not separated properly, malfunctioning may result.

CAUTION

Example of Separated External Cables

Steel separator

Power

circuit

cables

General

control cir-

cuit cables

Digital I/O

signal

cables

viii

Maintenance and Inspection Precautions

Disposal Precautions

General Precautions

• Do not attempt to disassemble the MP2000 Series Machine Controller.

There is a risk of electrical shock or injury.

• Do not change wiring while power is being supplied.

There is a risk of electrical shock or injury.

• When replacing the MP2000 Series Machine Controller, restart operation only after transferring the

programs and parameters from the old Module to the new Module.

If the MP2000 Series Machine Controller is operated without having transferred the data, there is a risk of

device damage.

• Dispose of the MP2000 Series Machine Controller as general industrial waste.

Observe the following general precautions

to ensure safe application.

• The products shown in illustrations in this manual are sometimes shown without covers or protec-

tive guards. Always replace the cover or protective guard as specified first, and then operate the

products in accordance with the manual.

• The drawings presented in this manual are typical examples and may not match the product you

received.

• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa representative

or one of the offices listed on the back of this manual.

CAUTION

Warranty

( 1 ) Details of Warranty

Warranty Period

The warranty period for a product that was purchased (hereafter called “delivered product”) is one year from the time

of delivery to the location specified by the customer or 18 months from the time of shipment from the Yaskawa factory,

whichever is sooner.

Warranty Scope

Yaskawa shall replace or repair a defective product free of change if a defect attributable to Yaskawa occurs during the

warranty period above. This warranty does not cover defects caused by the delivered product reaching the end of its

service life and replacement of parts that require replacement or that have a limited service life.

This warranty does not cover failures that result from any of the following causes.

1. Improper handling, abuse, or use in unsuitable conditions or in environments not described in product catalogs or

manuals, or in any separately agreed-upon specifications

2. Causes not attributable to the delivered product itself

3. Modifications or repairs not performed by Yaskawa

4. Abuse of the delivered product in a manner in which it was not originally intended

5. Causes that were not foreseeable with the scientific and technological understanding at the time of shipment from

Yaskawa

6. Events for which Yaskawa is not responsible, such as natural or human-made disasters

( 2 ) Limitations of Liability

1. Yaskawa shall in no event be responsible for any damage or loss of opportunity to the customer that arises due to

failure of the delivered product.

2. Yaskawa shall not be responsible for any programs (including parameter settings) or the results of program execu-

tion of the programs provided by the user or by a third party for use with programmable Yaskawa products.

3. The information described in product catalogs or manuals is provided for the purpose of the customer purchasing

the appropriate product for the intended application. The use thereof does not guarantee that there are no infringe-

ments of intellectual property rights or other proprietary rights of Yaskawa or third parties, nor does it construe a

license.

4. Yaskawa shall not be responsible for any damage arising from infringements of intellectual property rights or other

proprietary rights of third parties as a result of using the information described in catalogs or manuals.

Other manuals for MP2000 Series

This manual suits for next models

Table of contents

Other YASKAWA Controllers manuals

YASKAWA

YASKAWA CIMR-LC2A0018 User manual

YASKAWA

YASKAWA P7 User manual

YASKAWA

YASKAWA CIMR-VU BA0001 User manual

YASKAWA

YASKAWA MOTOMAN-NX100 Parts list manual

YASKAWA

YASKAWA J1000 CIMR-JC series User manual

YASKAWA

YASKAWA MOTOMAN Series User manual

YASKAWA

YASKAWA A1000 Series User manual

YASKAWA

YASKAWA U1000 iQpump Drive User manual

YASKAWA

YASKAWA MP3000 Series User manual

YASKAWA

YASKAWA MP2000 Series Instruction Manual

YASKAWA

YASKAWA Z1000 CIMR-ZU*A Series User manual

YASKAWA

YASKAWA MP23 Series User manual

YASKAWA

YASKAWA T1000A User manual

YASKAWA

YASKAWA GA800 Series Instruction Manual

YASKAWA

YASKAWA yasnac lx3 User manual

YASKAWA

YASKAWA JEPMC-YVD3001-E User manual

YASKAWA

YASKAWA YASNAC 3000G User manual

YASKAWA

YASKAWA Servopack CACR-SR Series User manual

YASKAWA

YASKAWA SI-EM3 User manual

YASKAWA

YASKAWA CIPR-GA50C series Owner's manual

YASKAWA

YASKAWA Z1000 CIMR-ZU*A Series Owner's manual

YASKAWA

YASKAWA MOTOMAN FS100 User manual

YASKAWA

YASKAWA YRC1000 User manual

YASKAWA

YASKAWA 1000 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide