Wyrestorm HALO Series User manual

HALO VX10

HALO Series All In One Video Bar

Quickstart Guide

HALO VX10 Quickstart Guide | 220113

INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)

[email protected]

1 of 2

Setting up the Video Bar

FOR PLACEMENT ON A MONITOR

1. Angle the mount of the HALO VX10 to t on a

TV, computer,or monitor at a position or angle

you desire.

2. Adjust the HALO VX10 to make sure the foot on

the mount is flush with the back of your device.

3. Manually adjust the HALO VX10 up/down to the

best position to frame yourself.

FOR PLACEMENT ON A TRIPOD*

1. Locate the M12 tripod thread on the bottom of

the Halo VX10.

2. Secure the Halo VX10 on your tripod by twisting

it into the M12 thread.

3. Place your Halo VX10 with the tripod anywhere

you desire to the best position to frame

yourself.

1. Drill holes on the wall and insert the expansion

screws provided.

2. Secure the wall-mounted bracket on the wall

using the screws provided.

3. Secure the HALO VX10 on the wall-mounted

bracket.

*Tripod not included

Wall Mounting Installation

CONNECTING THE VIDEO BAR

Plug the HALO VX10 into an available USB port on your computer.

*For best performance, use a USB 3.0 port.

Connect the DC power supply to a mains outlet.

USB-C to USB-A*

Troubleshooting

No or Poor Quality Picture (snow or noisy image)

• Verify that the HALO VX10 has been selected in your software’s device

settings

• Verify that the device is not in standby

• Verify that power is being supplied to the device

• Verify that all connections are not loose and are functioning properly

• Try using a different USB port on your computer

• Remove any intermediate devices such as USB hubs, extension cables or

switchers

No Audio Input or Output

• Verify that the HALO VX10 has been selected in your software’s audio

input/output settings

• Verify that the volume and microphone settings in your software are not

muted

• Verify that the volume on your PC/Mac is not muted

• Verify that the microphone settings on your PC/Mac are not muted.

WyreStorm HALO VX10

Connecting To Microsoft Teams

To connect the HALO VX10 to your Microsoft Teams software, rst navigate to your settings pane which can be found by clicking on your display image in the

top right hand corner, then click on the devices tab. Here you can change the device by using the dropdown menus. Select WyreStorm HALO VX10 under the

applicable options.

HALO VX10 Quickstart Guide | 220113

INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)

support@wyrestorm.com

2 of 2

In the Box

1x HALO VX10 Video Bar

1x USB-C Cable

1x 12V DC Power Supply (UK/US/EU/AU)

1x Wall Mount Kit

1x Magnetic Lens Cap

1x Quickstart Guide (This Document)

Warranty Information

WyreStorm Technologies ProAV Corporation warrants that its products to be free from

defects in material and workmanship under normal use for a period of two (2) years from

the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more

details on our limited product warranty.

SETUP SOFTWARE

The HALO VX10 has its own control software that can be used to adjust the camera and other

functions. Scan or click the QR code to the right to download the software.

WyreStorm HALO VX10

Software Device Setup

Connecting To Zoom

To connect the HALO VX10 to your Zoom software, rst navigate to your settings pane which can be found by clicking the gear icon in the top right hand corner,

then click on the Audio or Video tab. Here you can change the device by using the dropdown menus. Select WyreStorm HALO VX10 under the applicable options.

This manual suits for next models

Other Wyrestorm IP Camera manuals