Volt VWL-703 User manual

VOLT®LOW VOLTAGE LANDSCAPE LIGHTING

V O LT ®Salty Dog MR16 In-Grade Light

ITEM: VWL-703

INSTALLATION INSTRUCTIONS

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

V O LT ®Salty Dog MR16 In-Grade Light - VWL-703

INSTALLATION INSTRUCTIONS

IMPORTANT: PLEASE READ BEFORE INSTALLATION

IMPORTANT SAFETY INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the warranty.

These instructions do not intend to cover all variations in installation, operation

maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

xture.

2. Warning: this xture is not intended to be installed within 10 feet [3 meters]

of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (transformer)

rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with UL Listed wire connectors that are

suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2 cm)

from a building structure, a luminaire, or tting.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

LIGHTED LAMP IS HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

813.978.3700 • [email protected] • www.voltlighting.com

PACKAGE CONTENTS

Parts Required (sold separately)

813.978.3700 • [email protected] • www.voltlighting.com

PRODUCT DIMENSIONS

A. (1) Fixture B. (1) Stake

A. (1) MR16 Lamp

4.25”

4”

Remove Faceplate and Lens

Install/Replace Lamp

V O LT ®Salty Dog MR16 In-Grade Light - VWL-703

INSTALLATION INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

Unlock the screws and remove the

faceplate, gasket, and lens from the

housing.

Screw

Gasket

Lens

Faceplate

Housing

Insert lamp with correct wattage

and type marked on xture label.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

NOTE: DO NOT touch lamp with

bare hands. Use a soft cloth to

handle lamp.

MR16 Lamp

Socket

Install Lens and Faceplate

Install Fixture to Stake

Install Stake

813.978.3700 • [email protected] • www.voltlighting.com

Place the lens, gasket and faceplate

back onto the housing. Secure them

with screws previously removed.

Hand tighten until snug, then use a

screwdriver to secure them in a star

Screw

Faceplate

Gasket

Lens

Housing

Determine the desired location for

mounting the xture. Hammer the

stake into the ground until ange

of stake is ush to grade. To avoid

damage to the stake, place a board

on top of the stake while hammering.

NOTE: If the ground is hard and the

stake is difcult to install, make a

crosscut in the ground using a at

shovel before hammering the stake.

Board

Stake

Ground

Soil

Clear away an area in the ground

at the wireway slot on top of the

stake. Lay the luminaire pigtail into

the wireway slot and screw the

xture onto the stake. Tighten until

snug.

Wireway Slot

Fixture

Pigtail

Stake

Wire Connections

V O LT ®Salty Dog MR16 In-Grade Light - VWL-703

INSTALLATION INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

Strip both leads from the luminaire pigtail. Using two wire

connectors (sold separately), connect leads from luminaire to

the main supply cable.

Wire Connectors

Pigtail

Main Supply Cable

Specications and product details subject to change without notice.

[email protected] • www.voltlighting.com

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt VPL-1012-4-BBZ User manual

Volt

Volt VWL-705-BBZ User manual

Volt

Volt 390 Series User manual

Volt

Volt 3601 Series User manual

Volt

Volt VAL-91 Series Operating and safety instructions

Volt

Volt VHS-650-4-BBK User manual

Volt

Volt VUL-6802-25-BBZ User manual

Volt

Volt VHS-6719-25-BBZ User manual

Volt

Volt VSPL-1047-BBZ User manual

Volt

Volt VFL-4027 User manual

Volt

Volt VPL-1002 User manual

Volt

Volt VPL-1012-BBZ User manual

Volt

Volt Top Dog Scotty Mini Twinnovator Brass User manual

Volt

Volt VHS-605-4-FPG User manual

Volt

Volt VAL-2002 User manual

Volt

Volt VAC-STK-PWR-PGR User manual

Volt

Volt VDL-6000 User manual

Volt

Volt VSAC-PANEL1-SBK User manual

Volt

Volt VFL-4602-BBZ User manual

Volt

Volt VDL-6008-4-BBZ User manual

Volt

Volt VFL-450X-BBZ User manual

Volt

Volt VHS-6719-BBZ User manual

Volt

Volt VSSI-2005-50-BK User manual

Volt

Volt LED Top Dog Tommy Light User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions